From: "Christopher M. Riedl" <cmr@codefail.de>
To: linuxppc-dev@lists.ozlabs.org
Subject: [PATCH v7 07/10] powerpc/signal64: Replace restore_sigcontext() w/ unsafe_restore_sigcontext()
Date: Fri, 26 Feb 2021 19:12:56 -0600 [thread overview]
Message-ID: <20210227011259.11992-8-cmr@codefail.de> (raw)
In-Reply-To: <20210227011259.11992-1-cmr@codefail.de>
Previously restore_sigcontext() performed a costly KUAP switch on every
uaccess operation. These repeated uaccess switches cause a significant
drop in signal handling performance.
Rewrite restore_sigcontext() to assume that a userspace read access
window is open by replacing all uaccess functions with their 'unsafe'
versions. Modify the callers to first open, call
unsafe_restore_sigcontext(), and then close the uaccess window.
Signed-off-by: Christopher M. Riedl <cmr@codefail.de>
---
v7: * Don't use unsafe_op_wrap() since Christophe indicates this
macro may go away in the future.
---
arch/powerpc/kernel/signal_64.c | 68 ++++++++++++++++++++-------------
1 file changed, 41 insertions(+), 27 deletions(-)
diff --git a/arch/powerpc/kernel/signal_64.c b/arch/powerpc/kernel/signal_64.c
index 78ae4bb4e590..23a44ec3ac01 100644
--- a/arch/powerpc/kernel/signal_64.c
+++ b/arch/powerpc/kernel/signal_64.c
@@ -327,14 +327,16 @@ static long setup_tm_sigcontexts(struct sigcontext __user *sc,
/*
* Restore the sigcontext from the signal frame.
*/
-
-static long restore_sigcontext(struct task_struct *tsk, sigset_t *set, int sig,
- struct sigcontext __user *sc)
+#define unsafe_restore_sigcontext(tsk, set, sig, sc, label) do { \
+ if (__unsafe_restore_sigcontext(tsk, set, sig, sc)) \
+ goto label; \
+} while (0)
+static long notrace __unsafe_restore_sigcontext(struct task_struct *tsk, sigset_t *set,
+ int sig, struct sigcontext __user *sc)
{
#ifdef CONFIG_ALTIVEC
elf_vrreg_t __user *v_regs;
#endif
- unsigned long err = 0;
unsigned long save_r13 = 0;
unsigned long msr;
struct pt_regs *regs = tsk->thread.regs;
@@ -349,27 +351,27 @@ static long restore_sigcontext(struct task_struct *tsk, sigset_t *set, int sig,
save_r13 = regs->gpr[13];
/* copy the GPRs */
- err |= __copy_from_user(regs->gpr, sc->gp_regs, sizeof(regs->gpr));
- err |= __get_user(regs->nip, &sc->gp_regs[PT_NIP]);
+ unsafe_copy_from_user(regs->gpr, sc->gp_regs, sizeof(regs->gpr), efault_out);
+ unsafe_get_user(regs->nip, &sc->gp_regs[PT_NIP], efault_out);
/* get MSR separately, transfer the LE bit if doing signal return */
- err |= __get_user(msr, &sc->gp_regs[PT_MSR]);
+ unsafe_get_user(msr, &sc->gp_regs[PT_MSR], efault_out);
if (sig)
regs->msr = (regs->msr & ~MSR_LE) | (msr & MSR_LE);
- err |= __get_user(regs->orig_gpr3, &sc->gp_regs[PT_ORIG_R3]);
- err |= __get_user(regs->ctr, &sc->gp_regs[PT_CTR]);
- err |= __get_user(regs->link, &sc->gp_regs[PT_LNK]);
- err |= __get_user(regs->xer, &sc->gp_regs[PT_XER]);
- err |= __get_user(regs->ccr, &sc->gp_regs[PT_CCR]);
+ unsafe_get_user(regs->orig_gpr3, &sc->gp_regs[PT_ORIG_R3], efault_out);
+ unsafe_get_user(regs->ctr, &sc->gp_regs[PT_CTR], efault_out);
+ unsafe_get_user(regs->link, &sc->gp_regs[PT_LNK], efault_out);
+ unsafe_get_user(regs->xer, &sc->gp_regs[PT_XER], efault_out);
+ unsafe_get_user(regs->ccr, &sc->gp_regs[PT_CCR], efault_out);
/* Don't allow userspace to set SOFTE */
set_trap_norestart(regs);
- err |= __get_user(regs->dar, &sc->gp_regs[PT_DAR]);
- err |= __get_user(regs->dsisr, &sc->gp_regs[PT_DSISR]);
- err |= __get_user(regs->result, &sc->gp_regs[PT_RESULT]);
+ unsafe_get_user(regs->dar, &sc->gp_regs[PT_DAR], efault_out);
+ unsafe_get_user(regs->dsisr, &sc->gp_regs[PT_DSISR], efault_out);
+ unsafe_get_user(regs->result, &sc->gp_regs[PT_RESULT], efault_out);
if (!sig)
regs->gpr[13] = save_r13;
if (set != NULL)
- err |= __get_user(set->sig[0], &sc->oldmask);
+ unsafe_get_user(set->sig[0], &sc->oldmask, efault_out);
/*
* Force reload of FP/VEC.
@@ -379,29 +381,27 @@ static long restore_sigcontext(struct task_struct *tsk, sigset_t *set, int sig,
regs->msr &= ~(MSR_FP | MSR_FE0 | MSR_FE1 | MSR_VEC | MSR_VSX);
#ifdef CONFIG_ALTIVEC
- err |= __get_user(v_regs, &sc->v_regs);
- if (err)
- return err;
+ unsafe_get_user(v_regs, &sc->v_regs, efault_out);
if (v_regs && !access_ok(v_regs, 34 * sizeof(vector128)))
return -EFAULT;
/* Copy 33 vec registers (vr0..31 and vscr) from the stack */
if (v_regs != NULL && (msr & MSR_VEC) != 0) {
- err |= __copy_from_user(&tsk->thread.vr_state, v_regs,
- 33 * sizeof(vector128));
+ unsafe_copy_from_user(&tsk->thread.vr_state, v_regs,
+ 33 * sizeof(vector128), efault_out);
tsk->thread.used_vr = true;
} else if (tsk->thread.used_vr) {
memset(&tsk->thread.vr_state, 0, 33 * sizeof(vector128));
}
/* Always get VRSAVE back */
if (v_regs != NULL)
- err |= __get_user(tsk->thread.vrsave, (u32 __user *)&v_regs[33]);
+ unsafe_get_user(tsk->thread.vrsave, (u32 __user *)&v_regs[33], efault_out);
else
tsk->thread.vrsave = 0;
if (cpu_has_feature(CPU_FTR_ALTIVEC))
mtspr(SPRN_VRSAVE, tsk->thread.vrsave);
#endif /* CONFIG_ALTIVEC */
/* restore floating point */
- err |= copy_fpr_from_user(tsk, &sc->fp_regs);
+ unsafe_copy_fpr_from_user(tsk, &sc->fp_regs, efault_out);
#ifdef CONFIG_VSX
/*
* Get additional VSX data. Update v_regs to point after the
@@ -410,14 +410,17 @@ static long restore_sigcontext(struct task_struct *tsk, sigset_t *set, int sig,
*/
v_regs += ELF_NVRREG;
if ((msr & MSR_VSX) != 0) {
- err |= copy_vsx_from_user(tsk, v_regs);
+ unsafe_copy_vsx_from_user(tsk, v_regs, efault_out);
tsk->thread.used_vsr = true;
} else {
for (i = 0; i < 32 ; i++)
tsk->thread.fp_state.fpr[i][TS_VSRLOWOFFSET] = 0;
}
#endif
- return err;
+ return 0;
+
+efault_out:
+ return -EFAULT;
}
#ifdef CONFIG_PPC_TRANSACTIONAL_MEM
@@ -708,8 +711,14 @@ SYSCALL_DEFINE3(swapcontext, struct ucontext __user *, old_ctx,
if (__copy_from_user(&set, &new_ctx->uc_sigmask, sizeof(set)))
do_exit(SIGSEGV);
set_current_blocked(&set);
- if (restore_sigcontext(current, NULL, 0, &new_ctx->uc_mcontext))
+
+ if (!user_read_access_begin(new_ctx, ctx_size))
+ return -EFAULT;
+ if (__unsafe_restore_sigcontext(current, NULL, 0, &new_ctx->uc_mcontext)) {
+ user_read_access_end();
do_exit(SIGSEGV);
+ }
+ user_read_access_end();
/* This returns like rt_sigreturn */
set_thread_flag(TIF_RESTOREALL);
@@ -812,8 +821,13 @@ SYSCALL_DEFINE0(rt_sigreturn)
* causing a TM bad thing.
*/
current->thread.regs->msr &= ~MSR_TS_MASK;
- if (restore_sigcontext(current, NULL, 1, &uc->uc_mcontext))
+ if (!user_read_access_begin(&uc->uc_mcontext, sizeof(uc->uc_mcontext)))
+ return -EFAULT;
+ if (__unsafe_restore_sigcontext(current, NULL, 1, &uc->uc_mcontext)) {
+ user_read_access_end();
goto badframe;
+ }
+ user_read_access_end();
}
if (restore_altstack(&uc->uc_stack))
--
2.26.1
next prev parent reply other threads:[~2021-02-27 1:16 UTC|newest]
Thread overview: 12+ messages / expand[flat|nested] mbox.gz Atom feed top
2021-02-27 1:12 [PATCH v7 00/10] Improve signal performance on PPC64 with KUAP Christopher M. Riedl
2021-02-27 1:12 ` [PATCH v7 01/10] powerpc/uaccess: Add unsafe_copy_from_user() Christopher M. Riedl
2021-02-27 1:12 ` [PATCH v7 02/10] powerpc/signal: Add unsafe_copy_{vsx, fpr}_from_user() Christopher M. Riedl
2021-02-27 1:12 ` [PATCH v7 03/10] powerpc/signal64: Remove non-inline calls from setup_sigcontext() Christopher M. Riedl
2021-02-27 1:12 ` [PATCH v7 04/10] powerpc: Reference parameter in MSR_TM_ACTIVE() macro Christopher M. Riedl
2021-02-27 1:12 ` [PATCH v7 05/10] powerpc/signal64: Remove TM ifdefery in middle of if/else block Christopher M. Riedl
2021-02-27 1:12 ` [PATCH v7 06/10] powerpc/signal64: Replace setup_sigcontext() w/ unsafe_setup_sigcontext() Christopher M. Riedl
2021-02-27 1:12 ` Christopher M. Riedl [this message]
2021-02-27 1:12 ` [PATCH v7 08/10] powerpc/signal64: Rewrite handle_rt_signal64() to minimise uaccess switches Christopher M. Riedl
2021-02-27 1:12 ` [PATCH v7 09/10] powerpc/signal64: Rewrite rt_sigreturn() " Christopher M. Riedl
2021-02-27 1:12 ` [PATCH v7 10/10] powerpc/signal: Use __get_user() to copy sigset_t Christopher M. Riedl
2021-03-31 1:09 ` [PATCH v7 00/10] Improve signal performance on PPC64 with KUAP Michael Ellerman
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20210227011259.11992-8-cmr@codefail.de \
--to=cmr@codefail.de \
--cc=linuxppc-dev@lists.ozlabs.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).