From: "Christopher M. Riedl" <cmr@codefail.de>
To: linuxppc-dev@lists.ozlabs.org
Cc: Daniel Axtens <dja@axtens.net>
Subject: [PATCH v7 08/10] powerpc/signal64: Rewrite handle_rt_signal64() to minimise uaccess switches
Date: Fri, 26 Feb 2021 19:12:57 -0600 [thread overview]
Message-ID: <20210227011259.11992-9-cmr@codefail.de> (raw)
In-Reply-To: <20210227011259.11992-1-cmr@codefail.de>
From: Daniel Axtens <dja@axtens.net>
Add uaccess blocks and use the 'unsafe' versions of functions doing user
access where possible to reduce the number of times uaccess has to be
opened/closed.
There is no 'unsafe' version of copy_siginfo_to_user, so move it
slightly to allow for a "longer" uaccess block.
Signed-off-by: Daniel Axtens <dja@axtens.net>
Co-developed-by: Christopher M. Riedl <cmr@codefail.de>
Signed-off-by: Christopher M. Riedl <cmr@codefail.de>
---
arch/powerpc/kernel/signal_64.c | 56 ++++++++++++++++++++-------------
1 file changed, 35 insertions(+), 21 deletions(-)
diff --git a/arch/powerpc/kernel/signal_64.c b/arch/powerpc/kernel/signal_64.c
index 23a44ec3ac01..788854734b9a 100644
--- a/arch/powerpc/kernel/signal_64.c
+++ b/arch/powerpc/kernel/signal_64.c
@@ -854,45 +854,52 @@ int handle_rt_signal64(struct ksignal *ksig, sigset_t *set,
unsigned long msr = regs->msr;
frame = get_sigframe(ksig, tsk, sizeof(*frame), 0);
- if (!access_ok(frame, sizeof(*frame)))
- goto badframe;
- err |= __put_user(&frame->info, &frame->pinfo);
- err |= __put_user(&frame->uc, &frame->puc);
- err |= copy_siginfo_to_user(&frame->info, &ksig->info);
- if (err)
+ /* This only applies when calling unsafe_setup_sigcontext() and must be
+ * called before opening the uaccess window.
+ */
+ if (!MSR_TM_ACTIVE(msr))
+ prepare_setup_sigcontext(tsk);
+
+ if (!user_write_access_begin(frame, sizeof(*frame)))
goto badframe;
+ unsafe_put_user(&frame->info, &frame->pinfo, badframe_block);
+ unsafe_put_user(&frame->uc, &frame->puc, badframe_block);
+
/* Create the ucontext. */
- err |= __put_user(0, &frame->uc.uc_flags);
- err |= __save_altstack(&frame->uc.uc_stack, regs->gpr[1]);
+ unsafe_put_user(0, &frame->uc.uc_flags, badframe_block);
+ unsafe_save_altstack(&frame->uc.uc_stack, regs->gpr[1], badframe_block);
if (MSR_TM_ACTIVE(msr)) {
#ifdef CONFIG_PPC_TRANSACTIONAL_MEM
/* The ucontext_t passed to userland points to the second
* ucontext_t (for transactional state) with its uc_link ptr.
*/
- err |= __put_user(&frame->uc_transact, &frame->uc.uc_link);
+ unsafe_put_user(&frame->uc_transact, &frame->uc.uc_link, badframe_block);
+
+ user_write_access_end();
+
err |= setup_tm_sigcontexts(&frame->uc.uc_mcontext,
&frame->uc_transact.uc_mcontext,
tsk, ksig->sig, NULL,
(unsigned long)ksig->ka.sa.sa_handler,
msr);
+
+ if (!user_write_access_begin(&frame->uc.uc_sigmask,
+ sizeof(frame->uc.uc_sigmask)))
+ goto badframe;
+
#endif
} else {
- err |= __put_user(0, &frame->uc.uc_link);
- prepare_setup_sigcontext(tsk);
- if (!user_write_access_begin(&frame->uc.uc_mcontext,
- sizeof(frame->uc.uc_mcontext)))
- return -EFAULT;
- err |= __unsafe_setup_sigcontext(&frame->uc.uc_mcontext, tsk,
- ksig->sig, NULL,
- (unsigned long)ksig->ka.sa.sa_handler, 1);
- user_write_access_end();
+ unsafe_put_user(0, &frame->uc.uc_link, badframe_block);
+ unsafe_setup_sigcontext(&frame->uc.uc_mcontext, tsk, ksig->sig,
+ NULL, (unsigned long)ksig->ka.sa.sa_handler,
+ 1, badframe_block);
}
- err |= __copy_to_user(&frame->uc.uc_sigmask, set, sizeof(*set));
- if (err)
- goto badframe;
+
+ unsafe_copy_to_user(&frame->uc.uc_sigmask, set, sizeof(*set), badframe_block);
+ user_write_access_end();
/* Make sure signal handler doesn't get spurious FP exceptions */
tsk->thread.fp_state.fpscr = 0;
@@ -907,6 +914,11 @@ int handle_rt_signal64(struct ksignal *ksig, sigset_t *set,
regs->nip = (unsigned long) &frame->tramp[0];
}
+
+ /* Save the siginfo outside of the unsafe block. */
+ if (copy_siginfo_to_user(&frame->info, &ksig->info))
+ goto badframe;
+
/* Allocate a dummy caller frame for the signal handler. */
newsp = ((unsigned long)frame) - __SIGNAL_FRAMESIZE;
err |= put_user(regs->gpr[1], (unsigned long __user *)newsp);
@@ -946,6 +958,8 @@ int handle_rt_signal64(struct ksignal *ksig, sigset_t *set,
return 0;
+badframe_block:
+ user_write_access_end();
badframe:
signal_fault(current, regs, "handle_rt_signal64", frame);
--
2.26.1
next prev parent reply other threads:[~2021-02-27 1:15 UTC|newest]
Thread overview: 12+ messages / expand[flat|nested] mbox.gz Atom feed top
2021-02-27 1:12 [PATCH v7 00/10] Improve signal performance on PPC64 with KUAP Christopher M. Riedl
2021-02-27 1:12 ` [PATCH v7 01/10] powerpc/uaccess: Add unsafe_copy_from_user() Christopher M. Riedl
2021-02-27 1:12 ` [PATCH v7 02/10] powerpc/signal: Add unsafe_copy_{vsx, fpr}_from_user() Christopher M. Riedl
2021-02-27 1:12 ` [PATCH v7 03/10] powerpc/signal64: Remove non-inline calls from setup_sigcontext() Christopher M. Riedl
2021-02-27 1:12 ` [PATCH v7 04/10] powerpc: Reference parameter in MSR_TM_ACTIVE() macro Christopher M. Riedl
2021-02-27 1:12 ` [PATCH v7 05/10] powerpc/signal64: Remove TM ifdefery in middle of if/else block Christopher M. Riedl
2021-02-27 1:12 ` [PATCH v7 06/10] powerpc/signal64: Replace setup_sigcontext() w/ unsafe_setup_sigcontext() Christopher M. Riedl
2021-02-27 1:12 ` [PATCH v7 07/10] powerpc/signal64: Replace restore_sigcontext() w/ unsafe_restore_sigcontext() Christopher M. Riedl
2021-02-27 1:12 ` Christopher M. Riedl [this message]
2021-02-27 1:12 ` [PATCH v7 09/10] powerpc/signal64: Rewrite rt_sigreturn() to minimise uaccess switches Christopher M. Riedl
2021-02-27 1:12 ` [PATCH v7 10/10] powerpc/signal: Use __get_user() to copy sigset_t Christopher M. Riedl
2021-03-31 1:09 ` [PATCH v7 00/10] Improve signal performance on PPC64 with KUAP Michael Ellerman
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20210227011259.11992-9-cmr@codefail.de \
--to=cmr@codefail.de \
--cc=dja@axtens.net \
--cc=linuxppc-dev@lists.ozlabs.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).