[PATCH AUTOSEL 5.12 029/116] selftests/powerpc: Fix L1D flushing tests for Power10

[PATCH AUTOSEL 5.12 029/116] selftests/powerpc: Fix L1D flushing tests for Power10

[Sasha Levin]

From: Russell Currey <ruscur@russell.cc>

[ Upstream commit 3a72c94ebfb1f171eba0715998010678a09ec796 ]

The rfi_flush and entry_flush selftests work by using the PM_LD_MISS_L1
perf event to count L1D misses.  The value of this event has changed
over time:

- Power7 uses 0x400f0
- Power8 and Power9 use both 0x400f0 and 0x3e054
- Power10 uses only 0x3e054

Rather than relying on raw values, configure perf to count L1D read
misses in the most explicit way available.

This fixes the selftests to work on systems without 0x400f0 as
PM_LD_MISS_L1, and should change no behaviour for systems that the tests
already worked on.

The only potential downside is that referring to a specific perf event
requires PMU support implemented in the kernel for that platform.

Signed-off-by: Russell Currey <ruscur@russell.cc>
Acked-by: Daniel Axtens <dja@axtens.net>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20210223070227.2916871-1-ruscur@russell.cc
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 tools/testing/selftests/powerpc/security/entry_flush.c | 2 +-
 tools/testing/selftests/powerpc/security/flush_utils.h | 4 ++++
 tools/testing/selftests/powerpc/security/rfi_flush.c   | 2 +-
 3 files changed, 6 insertions(+), 2 deletions(-)

diff --git a/tools/testing/selftests/powerpc/security/entry_flush.c b/tools/testing/selftests/powerpc/security/entry_flush.c
index 78cf914fa321..68ce377b205e 100644
--- a/tools/testing/selftests/powerpc/security/entry_flush.c
+++ b/tools/testing/selftests/powerpc/security/entry_flush.c
@@ -53,7 +53,7 @@ int entry_flush_test(void)
 
 	entry_flush = entry_flush_orig;
 
-	fd = perf_event_open_counter(PERF_TYPE_RAW, /* L1d miss */ 0x400f0, -1);
+	fd = perf_event_open_counter(PERF_TYPE_HW_CACHE, PERF_L1D_READ_MISS_CONFIG, -1);
 	FAIL_IF(fd < 0);
 
 	p = (char *)memalign(zero_size, CACHELINE_SIZE);
diff --git a/tools/testing/selftests/powerpc/security/flush_utils.h b/tools/testing/selftests/powerpc/security/flush_utils.h
index 07a5eb301466..7a3d60292916 100644
--- a/tools/testing/selftests/powerpc/security/flush_utils.h
+++ b/tools/testing/selftests/powerpc/security/flush_utils.h
@@ -9,6 +9,10 @@
 
 #define CACHELINE_SIZE 128
 
+#define PERF_L1D_READ_MISS_CONFIG	((PERF_COUNT_HW_CACHE_L1D) | 		\
+					(PERF_COUNT_HW_CACHE_OP_READ << 8) |	\
+					(PERF_COUNT_HW_CACHE_RESULT_MISS << 16))
+
 void syscall_loop(char *p, unsigned long iterations,
 		  unsigned long zero_size);
 
diff --git a/tools/testing/selftests/powerpc/security/rfi_flush.c b/tools/testing/selftests/powerpc/security/rfi_flush.c
index 7565fd786640..f73484a6470f 100644
--- a/tools/testing/selftests/powerpc/security/rfi_flush.c
+++ b/tools/testing/selftests/powerpc/security/rfi_flush.c
@@ -54,7 +54,7 @@ int rfi_flush_test(void)
 
 	rfi_flush = rfi_flush_orig;
 
-	fd = perf_event_open_counter(PERF_TYPE_RAW, /* L1d miss */ 0x400f0, -1);
+	fd = perf_event_open_counter(PERF_TYPE_HW_CACHE, PERF_L1D_READ_MISS_CONFIG, -1);
 	FAIL_IF(fd < 0);
 
 	p = (char *)memalign(zero_size, CACHELINE_SIZE);
-- 
2.30.2

[PATCH AUTOSEL 5.12 031/116] powerpc/32: Statically initialise first emergency context

[Sasha Levin]

From: Christophe Leroy <christophe.leroy@csgroup.eu>

[ Upstream commit a4719f5bb6d7dc220bffdc1b9f5ce5eaa5543581 ]

The check of the emergency context initialisation in
vmap_stack_overflow is buggy for the SMP case, as it
compares r1 with 0 while in the SMP case r1 is offseted
by the CPU id.

Instead of fixing it, just perform static initialisation
of the first emergency context.

Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/4a67ba422be75713286dca0c86ee0d3df2eb6dfa.1615552867.git.christophe.leroy@csgroup.eu
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 arch/powerpc/kernel/head_32.h  | 6 +-----
 arch/powerpc/kernel/setup_32.c | 2 +-
 2 files changed, 2 insertions(+), 6 deletions(-)

diff --git a/arch/powerpc/kernel/head_32.h b/arch/powerpc/kernel/head_32.h
index 5d4706c14572..cf8ca08295bf 100644
--- a/arch/powerpc/kernel/head_32.h
+++ b/arch/powerpc/kernel/head_32.h
@@ -261,11 +261,7 @@
 	lis	r1, emergency_ctx@ha
 #endif
 	lwz	r1, emergency_ctx@l(r1)
-	cmpwi	cr1, r1, 0
-	bne	cr1, 1f
-	lis	r1, init_thread_union@ha
-	addi	r1, r1, init_thread_union@l
-1:	addi	r1, r1, THREAD_SIZE - INT_FRAME_SIZE
+	addi	r1, r1, THREAD_SIZE - INT_FRAME_SIZE
 	EXCEPTION_PROLOG_2
 	SAVE_NVGPRS(r11)
 	addi	r3, r1, STACK_FRAME_OVERHEAD
diff --git a/arch/powerpc/kernel/setup_32.c b/arch/powerpc/kernel/setup_32.c
index 8ba49a6bf515..d7c1f92152af 100644
--- a/arch/powerpc/kernel/setup_32.c
+++ b/arch/powerpc/kernel/setup_32.c
@@ -164,7 +164,7 @@ void __init irqstack_early_init(void)
 }
 
 #ifdef CONFIG_VMAP_STACK
-void *emergency_ctx[NR_CPUS] __ro_after_init;
+void *emergency_ctx[NR_CPUS] __ro_after_init = {[0] = &init_stack};
 
 void __init emergency_stack_init(void)
 {
-- 
2.30.2

[PATCH AUTOSEL 5.12 072/116] powerpc/mm: Add cond_resched() while removing hpte mappings

[Sasha Levin]

From: Vaibhav Jain <vaibhav@linux.ibm.com>

[ Upstream commit a5d6a3e73acbd619dd5b7b831762b755f9e2db80 ]

While removing large number of mappings from hash page tables for
large memory systems as soft-lockup is reported because of the time
spent inside htap_remove_mapping() like one below:

 watchdog: BUG: soft lockup - CPU#8 stuck for 23s!
 <snip>
 NIP plpar_hcall+0x38/0x58
 LR  pSeries_lpar_hpte_invalidate+0x68/0xb0
 Call Trace:
  0x1fffffffffff000 (unreliable)
  pSeries_lpar_hpte_removebolted+0x9c/0x230
  hash__remove_section_mapping+0xec/0x1c0
  remove_section_mapping+0x28/0x3c
  arch_remove_memory+0xfc/0x150
  devm_memremap_pages_release+0x180/0x2f0
  devm_action_release+0x30/0x50
  release_nodes+0x28c/0x300
  device_release_driver_internal+0x16c/0x280
  unbind_store+0x124/0x170
  drv_attr_store+0x44/0x60
  sysfs_kf_write+0x64/0x90
  kernfs_fop_write+0x1b0/0x290
  __vfs_write+0x3c/0x70
  vfs_write+0xd4/0x270
  ksys_write+0xdc/0x130
  system_call+0x5c/0x70

Fix this by adding a cond_resched() to the loop in
htap_remove_mapping() that issues hcall to remove hpte mapping. The
call to cond_resched() is issued every HZ jiffies which should prevent
the soft-lockup from being reported.

Suggested-by: Aneesh Kumar K.V <aneesh.kumar@linux.ibm.com>
Signed-off-by: Vaibhav Jain <vaibhav@linux.ibm.com>
Reviewed-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20210404163148.321346-1-vaibhav@linux.ibm.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 arch/powerpc/mm/book3s64/hash_utils.c | 13 ++++++++++++-
 1 file changed, 12 insertions(+), 1 deletion(-)

diff --git a/arch/powerpc/mm/book3s64/hash_utils.c b/arch/powerpc/mm/book3s64/hash_utils.c
index 581b20a2feaf..286e7e8cb919 100644
--- a/arch/powerpc/mm/book3s64/hash_utils.c
+++ b/arch/powerpc/mm/book3s64/hash_utils.c
@@ -338,7 +338,7 @@ int htab_bolt_mapping(unsigned long vstart, unsigned long vend,
 int htab_remove_mapping(unsigned long vstart, unsigned long vend,
 		      int psize, int ssize)
 {
-	unsigned long vaddr;
+	unsigned long vaddr, time_limit;
 	unsigned int step, shift;
 	int rc;
 	int ret = 0;
@@ -351,8 +351,19 @@ int htab_remove_mapping(unsigned long vstart, unsigned long vend,
 
 	/* Unmap the full range specificied */
 	vaddr = ALIGN_DOWN(vstart, step);
+	time_limit = jiffies + HZ;
+
 	for (;vaddr < vend; vaddr += step) {
 		rc = mmu_hash_ops.hpte_removebolted(vaddr, psize, ssize);
+
+		/*
+		 * For large number of mappings introduce a cond_resched()
+		 * to prevent softlockup warnings.
+		 */
+		if (time_after(jiffies, time_limit)) {
+			cond_resched();
+			time_limit = jiffies + HZ;
+		}
 		if (rc == -ENOENT) {
 			ret = -ENOENT;
 			continue;
-- 
2.30.2

[PATCH AUTOSEL 5.12 086/116] powerpc/xive: Use the "ibm, chip-id" property only under PowerNV

[Sasha Levin]

From: Cédric Le Goater <clg@kaod.org>

[ Upstream commit e9e16917bc388846163b8566a298a291d71e44c9 ]

The 'chip_id' field of the XIVE CPU structure is used to choose a
target for a source located on the same chip. For that, the XIVE
driver queries the chip identifier from the "ibm,chip-id" property
and compares it to a 'src_chip' field identifying the chip of a
source. This information is only available on the PowerNV platform,
'src_chip' being assigned to XIVE_INVALID_CHIP_ID under pSeries.

The "ibm,chip-id" property is also not available on all platforms. It
was first introduced on PowerNV and later, under QEMU for pSeries/KVM.
However, the property is not part of PAPR and does not exist under
pSeries/PowerVM.

Assign 'chip_id' to XIVE_INVALID_CHIP_ID by default and let the
PowerNV platform override the value with the "ibm,chip-id" property.

Signed-off-by: Cédric Le Goater <clg@kaod.org>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20210413130352.1183267-1-clg@kaod.org
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 arch/powerpc/sysdev/xive/common.c        | 9 +++------
 arch/powerpc/sysdev/xive/native.c        | 6 ++++++
 arch/powerpc/sysdev/xive/xive-internal.h | 1 +
 3 files changed, 10 insertions(+), 6 deletions(-)

diff --git a/arch/powerpc/sysdev/xive/common.c b/arch/powerpc/sysdev/xive/common.c
index 595310e056f4..e897c3bab371 100644
--- a/arch/powerpc/sysdev/xive/common.c
+++ b/arch/powerpc/sysdev/xive/common.c
@@ -1335,17 +1335,14 @@ static int xive_prepare_cpu(unsigned int cpu)
 
 	xc = per_cpu(xive_cpu, cpu);
 	if (!xc) {
-		struct device_node *np;
-
 		xc = kzalloc_node(sizeof(struct xive_cpu),
 				  GFP_KERNEL, cpu_to_node(cpu));
 		if (!xc)
 			return -ENOMEM;
-		np = of_get_cpu_node(cpu, NULL);
-		if (np)
-			xc->chip_id = of_get_ibm_chip_id(np);
-		of_node_put(np);
 		xc->hw_ipi = XIVE_BAD_IRQ;
+		xc->chip_id = XIVE_INVALID_CHIP_ID;
+		if (xive_ops->prepare_cpu)
+			xive_ops->prepare_cpu(cpu, xc);
 
 		per_cpu(xive_cpu, cpu) = xc;
 	}
diff --git a/arch/powerpc/sysdev/xive/native.c b/arch/powerpc/sysdev/xive/native.c
index 05a800a3104e..57e3f1540435 100644
--- a/arch/powerpc/sysdev/xive/native.c
+++ b/arch/powerpc/sysdev/xive/native.c
@@ -380,6 +380,11 @@ static void xive_native_update_pending(struct xive_cpu *xc)
 	}
 }
 
+static void xive_native_prepare_cpu(unsigned int cpu, struct xive_cpu *xc)
+{
+	xc->chip_id = cpu_to_chip_id(cpu);
+}
+
 static void xive_native_setup_cpu(unsigned int cpu, struct xive_cpu *xc)
 {
 	s64 rc;
@@ -462,6 +467,7 @@ static const struct xive_ops xive_native_ops = {
 	.match			= xive_native_match,
 	.shutdown		= xive_native_shutdown,
 	.update_pending		= xive_native_update_pending,
+	.prepare_cpu		= xive_native_prepare_cpu,
 	.setup_cpu		= xive_native_setup_cpu,
 	.teardown_cpu		= xive_native_teardown_cpu,
 	.sync_source		= xive_native_sync_source,
diff --git a/arch/powerpc/sysdev/xive/xive-internal.h b/arch/powerpc/sysdev/xive/xive-internal.h
index 9cf57c722faa..6478be19b4d3 100644
--- a/arch/powerpc/sysdev/xive/xive-internal.h
+++ b/arch/powerpc/sysdev/xive/xive-internal.h
@@ -46,6 +46,7 @@ struct xive_ops {
 				  u32 *sw_irq);
 	int	(*setup_queue)(unsigned int cpu, struct xive_cpu *xc, u8 prio);
 	void	(*cleanup_queue)(unsigned int cpu, struct xive_cpu *xc, u8 prio);
+	void	(*prepare_cpu)(unsigned int cpu, struct xive_cpu *xc);
 	void	(*setup_cpu)(unsigned int cpu, struct xive_cpu *xc);
 	void	(*teardown_cpu)(unsigned int cpu, struct xive_cpu *xc);
 	bool	(*match)(struct device_node *np);
-- 
2.30.2

[PATCH AUTOSEL 5.12 087/116] powerpc/smp: Set numa node before updating mask

[Sasha Levin]

From: Srikar Dronamraju <srikar@linux.vnet.ibm.com>

[ Upstream commit 6980d13f0dd189846887bbbfa43793d9a41768d3 ]

Geethika reported a trace when doing a dlpar CPU add.

------------[ cut here ]------------
WARNING: CPU: 152 PID: 1134 at kernel/sched/topology.c:2057
CPU: 152 PID: 1134 Comm: kworker/152:1 Not tainted 5.12.0-rc5-master #5
Workqueue: events cpuset_hotplug_workfn
NIP:  c0000000001cfc14 LR: c0000000001cfc10 CTR: c0000000007e3420
REGS: c0000034a08eb260 TRAP: 0700   Not tainted  (5.12.0-rc5-master+)
MSR:  8000000000029033 <SF,EE,ME,IR,DR,RI,LE>  CR: 28828422  XER: 00000020
CFAR: c0000000001fd888 IRQMASK: 0 #012GPR00: c0000000001cfc10
c0000034a08eb500 c000000001f35400 0000000000000027 #012GPR04:
c0000035abaa8010 c0000035abb30a00 0000000000000027 c0000035abaa8018
#012GPR08: 0000000000000023 c0000035abaaef48 00000035aa540000
c0000035a49dffe8 #012GPR12: 0000000028828424 c0000035bf1a1c80
0000000000000497 0000000000000004 #012GPR16: c00000000347a258
0000000000000140 c00000000203d468 c000000001a1a490 #012GPR20:
c000000001f9c160 c0000034adf70920 c0000034aec9fd20 0000000100087bd3
#012GPR24: 0000000100087bd3 c0000035b3de09f8 0000000000000030
c0000035b3de09f8 #012GPR28: 0000000000000028 c00000000347a280
c0000034aefe0b00 c0000000010a2a68
NIP [c0000000001cfc14] build_sched_domains+0x6a4/0x1500
LR [c0000000001cfc10] build_sched_domains+0x6a0/0x1500
Call Trace:
[c0000034a08eb500] [c0000000001cfc10] build_sched_domains+0x6a0/0x1500 (unreliable)
[c0000034a08eb640] [c0000000001d1e6c] partition_sched_domains_locked+0x3ec/0x530
[c0000034a08eb6e0] [c0000000002936d4] rebuild_sched_domains_locked+0x524/0xbf0
[c0000034a08eb7e0] [c000000000296bb0] rebuild_sched_domains+0x40/0x70
[c0000034a08eb810] [c000000000296e74] cpuset_hotplug_workfn+0x294/0xe20
[c0000034a08ebc30] [c000000000178dd0] process_one_work+0x300/0x670
[c0000034a08ebd10] [c0000000001791b8] worker_thread+0x78/0x520
[c0000034a08ebda0] [c000000000185090] kthread+0x1a0/0x1b0
[c0000034a08ebe10] [c00000000000ccec] ret_from_kernel_thread+0x5c/0x70
Instruction dump:
7d2903a6 4e800421 e8410018 7f67db78 7fe6fb78 7f45d378 7f84e378 7c681b78
3c62ff1a 3863c6f8 4802dc35 60000000 <0fe00000> 3920fff4 f9210070 e86100a0
---[ end trace 532d9066d3d4d7ec ]---

Some of the per-CPU masks use cpu_cpu_mask as a filter to limit the search
for related CPUs. On a dlpar add of a CPU, update cpu_cpu_mask before
updating the per-CPU masks. This will ensure the cpu_cpu_mask is updated
correctly before its used in setting the masks. Setting the numa_node will
ensure that when cpu_cpu_mask() gets called, the correct node number is
used. This code movement helped fix the above call trace.

Reported-by: Geetika Moolchandani <Geetika.Moolchandani1@ibm.com>
Signed-off-by: Srikar Dronamraju <srikar@linux.vnet.ibm.com>
Reviewed-by: Nathan Lynch <nathanl@linux.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20210401154200.150077-1-srikar@linux.vnet.ibm.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 arch/powerpc/kernel/smp.c | 6 +++---
 1 file changed, 3 insertions(+), 3 deletions(-)

diff --git a/arch/powerpc/kernel/smp.c b/arch/powerpc/kernel/smp.c
index 5a4d59a1070d..1a99d75679a8 100644
--- a/arch/powerpc/kernel/smp.c
+++ b/arch/powerpc/kernel/smp.c
@@ -1521,6 +1521,9 @@ void start_secondary(void *unused)
 
 	vdso_getcpu_init();
 #endif
+	set_numa_node(numa_cpu_lookup_table[cpu]);
+	set_numa_mem(local_memory_node(numa_cpu_lookup_table[cpu]));
+
 	/* Update topology CPU masks */
 	add_cpu_to_masks(cpu);
 
@@ -1539,9 +1542,6 @@ void start_secondary(void *unused)
 			shared_caches = true;
 	}
 
-	set_numa_node(numa_cpu_lookup_table[cpu]);
-	set_numa_mem(local_memory_node(numa_cpu_lookup_table[cpu]));
-
 	smp_wmb();
 	notify_cpu_starting(cpu);
 	set_cpu_online(cpu, true);
-- 
2.30.2

[PATCH AUTOSEL 5.12 094/116] powerpc/pseries: Stop calling printk in rtas_stop_self()

[Sasha Levin]

From: Michael Ellerman <mpe@ellerman.id.au>

[ Upstream commit ed8029d7b472369a010a1901358567ca3b6dbb0d ]

RCU complains about us calling printk() from an offline CPU:

  =============================
  WARNING: suspicious RCU usage
  5.12.0-rc7-02874-g7cf90e481cb8 #1 Not tainted
  -----------------------------
  kernel/locking/lockdep.c:3568 RCU-list traversed in non-reader section!!

  other info that might help us debug this:

  RCU used illegally from offline CPU!
  rcu_scheduler_active = 2, debug_locks = 1
  no locks held by swapper/0/0.

  stack backtrace:
  CPU: 0 PID: 0 Comm: swapper/0 Not tainted 5.12.0-rc7-02874-g7cf90e481cb8 #1
  Call Trace:
    dump_stack+0xec/0x144 (unreliable)
    lockdep_rcu_suspicious+0x124/0x144
    __lock_acquire+0x1098/0x28b0
    lock_acquire+0x128/0x600
    _raw_spin_lock_irqsave+0x6c/0xc0
    down_trylock+0x2c/0x70
    __down_trylock_console_sem+0x60/0x140
    vprintk_emit+0x1a8/0x4b0
    vprintk_func+0xcc/0x200
    printk+0x40/0x54
    pseries_cpu_offline_self+0xc0/0x120
    arch_cpu_idle_dead+0x54/0x70
    do_idle+0x174/0x4a0
    cpu_startup_entry+0x38/0x40
    rest_init+0x268/0x388
    start_kernel+0x748/0x790
    start_here_common+0x1c/0x614

Which happens because by the time we get to rtas_stop_self() we are
already offline. In addition the message can be spammy, and is not that
helpful for users, so remove it.

Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20210418135413.1204031-1-mpe@ellerman.id.au
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 arch/powerpc/platforms/pseries/hotplug-cpu.c | 3 ---
 1 file changed, 3 deletions(-)

diff --git a/arch/powerpc/platforms/pseries/hotplug-cpu.c b/arch/powerpc/platforms/pseries/hotplug-cpu.c
index 12cbffd3c2e3..325f3b220f36 100644
--- a/arch/powerpc/platforms/pseries/hotplug-cpu.c
+++ b/arch/powerpc/platforms/pseries/hotplug-cpu.c
@@ -47,9 +47,6 @@ static void rtas_stop_self(void)
 
 	BUG_ON(rtas_stop_self_token == RTAS_UNKNOWN_SERVICE);
 
-	printk("cpu %u (hwid %u) Ready to die...\n",
-	       smp_processor_id(), hard_smp_processor_id());
-
 	rtas_call_unlocked(&args, rtas_stop_self_token, 0, 1, NULL);
 
 	panic("Alas, I survived.\n");
-- 
2.30.2

[PATCH AUTOSEL 5.12 103/116] powerpc/iommu: Annotate nested lock for lockdep

[Sasha Levin]

From: Alexey Kardashevskiy <aik@ozlabs.ru>

[ Upstream commit cc7130bf119add37f36238343a593b71ef6ecc1e ]

The IOMMU table is divided into pools for concurrent mappings and each
pool has a separate spinlock. When taking the ownership of an IOMMU group
to pass through a device to a VM, we lock these spinlocks which triggers
a false negative warning in lockdep (below).

This fixes it by annotating the large pool's spinlock as a nest lock
which makes lockdep not complaining when locking nested locks if
the nest lock is locked already.

===
WARNING: possible recursive locking detected
5.11.0-le_syzkaller_a+fstn1 #100 Not tainted
--------------------------------------------
qemu-system-ppc/4129 is trying to acquire lock:
c0000000119bddb0 (&(p->lock)/1){....}-{2:2}, at: iommu_take_ownership+0xac/0x1e0

but task is already holding lock:
c0000000119bdd30 (&(p->lock)/1){....}-{2:2}, at: iommu_take_ownership+0xac/0x1e0

other info that might help us debug this:
 Possible unsafe locking scenario:

       CPU0
       ----
  lock(&(p->lock)/1);
  lock(&(p->lock)/1);
===

Signed-off-by: Alexey Kardashevskiy <aik@ozlabs.ru>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20210301063653.51003-1-aik@ozlabs.ru
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 arch/powerpc/kernel/iommu.c | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

diff --git a/arch/powerpc/kernel/iommu.c b/arch/powerpc/kernel/iommu.c
index c00214a4355c..4023f91defa6 100644
--- a/arch/powerpc/kernel/iommu.c
+++ b/arch/powerpc/kernel/iommu.c
@@ -1096,7 +1096,7 @@ int iommu_take_ownership(struct iommu_table *tbl)
 
 	spin_lock_irqsave(&tbl->large_pool.lock, flags);
 	for (i = 0; i < tbl->nr_pools; i++)
-		spin_lock(&tbl->pools[i].lock);
+		spin_lock_nest_lock(&tbl->pools[i].lock, &tbl->large_pool.lock);
 
 	iommu_table_release_pages(tbl);
 
@@ -1124,7 +1124,7 @@ void iommu_release_ownership(struct iommu_table *tbl)
 
 	spin_lock_irqsave(&tbl->large_pool.lock, flags);
 	for (i = 0; i < tbl->nr_pools; i++)
-		spin_lock(&tbl->pools[i].lock);
+		spin_lock_nest_lock(&tbl->pools[i].lock, &tbl->large_pool.lock);
 
 	memset(tbl->it_map, 0, sz);
 
-- 
2.30.2