From: "Aneesh Kumar K.V" <aneesh.kumar@linux.ibm.com>
To: linux-mm@kvack.org, akpm@linux-foundation.org
Cc: "Aneesh Kumar K.V" <aneesh.kumar@linux.ibm.com>,
Linus Torvalds <torvalds@linux-foundation.org>,
npiggin@gmail.com, kaleshsingh@google.com,
joel@joelfernandes.org, linuxppc-dev@lists.ozlabs.org
Subject: [PATCH v6 05/11] powerpc/mm/book3s64: Fix possible build error
Date: Mon, 24 May 2021 14:31:08 +0530 [thread overview]
Message-ID: <20210524090114.63446-6-aneesh.kumar@linux.ibm.com> (raw)
In-Reply-To: <20210524090114.63446-1-aneesh.kumar@linux.ibm.com>
Update _tlbiel_pid() such that we can avoid build errors like below when
using this function in other places.
arch/powerpc/mm/book3s64/radix_tlb.c: In function ‘__radix__flush_tlb_range_psize’:
arch/powerpc/mm/book3s64/radix_tlb.c:114:2: warning: ‘asm’ operand 3 probably does not match constraints
114 | asm volatile(PPC_TLBIEL(%0, %4, %3, %2, %1)
| ^~~
arch/powerpc/mm/book3s64/radix_tlb.c:114:2: error: impossible constraint in ‘asm’
make[4]: *** [scripts/Makefile.build:271: arch/powerpc/mm/book3s64/radix_tlb.o] Error 1
m
With this fix, we can also drop the __always_inline in __radix_flush_tlb_range_psize
which was added by commit e12d6d7d46a6 ("powerpc/mm/radix: mark __radix__flush_tlb_range_psize() as __always_inline")
Reviewed-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Acked-by: Michael Ellerman <mpe@ellerman.id.au>
Signed-off-by: Aneesh Kumar K.V <aneesh.kumar@linux.ibm.com>
---
arch/powerpc/mm/book3s64/radix_tlb.c | 26 +++++++++++++++++---------
1 file changed, 17 insertions(+), 9 deletions(-)
diff --git a/arch/powerpc/mm/book3s64/radix_tlb.c b/arch/powerpc/mm/book3s64/radix_tlb.c
index 409e61210789..817a02ef6032 100644
--- a/arch/powerpc/mm/book3s64/radix_tlb.c
+++ b/arch/powerpc/mm/book3s64/radix_tlb.c
@@ -291,22 +291,30 @@ static inline void fixup_tlbie_lpid(unsigned long lpid)
/*
* We use 128 set in radix mode and 256 set in hpt mode.
*/
-static __always_inline void _tlbiel_pid(unsigned long pid, unsigned long ric)
+static inline void _tlbiel_pid(unsigned long pid, unsigned long ric)
{
int set;
asm volatile("ptesync": : :"memory");
- /*
- * Flush the first set of the TLB, and if we're doing a RIC_FLUSH_ALL,
- * also flush the entire Page Walk Cache.
- */
- __tlbiel_pid(pid, 0, ric);
+ switch (ric) {
+ case RIC_FLUSH_PWC:
- /* For PWC, only one flush is needed */
- if (ric == RIC_FLUSH_PWC) {
+ /* For PWC, only one flush is needed */
+ __tlbiel_pid(pid, 0, RIC_FLUSH_PWC);
ppc_after_tlbiel_barrier();
return;
+ case RIC_FLUSH_TLB:
+ __tlbiel_pid(pid, 0, RIC_FLUSH_TLB);
+ break;
+ case RIC_FLUSH_ALL:
+ default:
+ /*
+ * Flush the first set of the TLB, and if
+ * we're doing a RIC_FLUSH_ALL, also flush
+ * the entire Page Walk Cache.
+ */
+ __tlbiel_pid(pid, 0, RIC_FLUSH_ALL);
}
if (!cpu_has_feature(CPU_FTR_ARCH_31)) {
@@ -1176,7 +1184,7 @@ void radix__tlb_flush(struct mmu_gather *tlb)
}
}
-static __always_inline void __radix__flush_tlb_range_psize(struct mm_struct *mm,
+static void __radix__flush_tlb_range_psize(struct mm_struct *mm,
unsigned long start, unsigned long end,
int psize, bool also_pwc)
{
--
2.31.1
next prev parent reply other threads:[~2021-05-24 9:04 UTC|newest]
Thread overview: 16+ messages / expand[flat|nested] mbox.gz Atom feed top
2021-05-24 9:01 [PATCH v6 00/11] Speedup mremap on ppc64 Aneesh Kumar K.V
2021-05-24 9:01 ` [PATCH v6 01/11] selftest/mremap_test: Update the test to handle pagesize other than 4K Aneesh Kumar K.V
2021-05-24 9:01 ` [PATCH v6 02/11] selftest/mremap_test: Avoid crash with static build Aneesh Kumar K.V
2021-05-24 9:01 ` [PATCH v6 03/11] mm/mremap: Convert huge PUD move to separate helper Aneesh Kumar K.V
2021-05-24 9:01 ` [PATCH v6 04/11] mm/mremap: Use pmd/pud_poplulate to update page table entries Aneesh Kumar K.V
2021-05-24 9:01 ` Aneesh Kumar K.V [this message]
2021-05-24 9:01 ` [PATCH v6 06/11] powerpc/mm/book3s64: Update tlb flush routines to take a page walk cache flush argument Aneesh Kumar K.V
2021-05-24 9:01 ` [PATCH v6 07/11] mm/mremap: Use range flush that does TLB and page walk cache flush Aneesh Kumar K.V
2021-05-24 17:02 ` Linus Torvalds
2021-05-25 13:27 ` Aneesh Kumar K.V
2021-05-25 17:08 ` Linus Torvalds
2021-05-24 9:01 ` [PATCH v6 08/11] mm/mremap: properly flush the TLB on mremap Aneesh Kumar K.V
2021-05-24 9:01 ` [PATCH v6 09/11] mm/mremap: Fix race between mremap and pageout Aneesh Kumar K.V
2021-05-24 13:38 ` [PATCH v6 updated 9/11] " Aneesh Kumar K.V
2021-05-24 9:01 ` [PATCH v6 10/11] mm/mremap: Allow arch runtime override Aneesh Kumar K.V
2021-05-24 9:01 ` [PATCH v6 11/11] powerpc/mm: Enable HAVE_MOVE_PMD support Aneesh Kumar K.V
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20210524090114.63446-6-aneesh.kumar@linux.ibm.com \
--to=aneesh.kumar@linux.ibm.com \
--cc=akpm@linux-foundation.org \
--cc=joel@joelfernandes.org \
--cc=kaleshsingh@google.com \
--cc=linux-mm@kvack.org \
--cc=linuxppc-dev@lists.ozlabs.org \
--cc=npiggin@gmail.com \
--cc=torvalds@linux-foundation.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).