linuxppc-dev.lists.ozlabs.org archive mirror
 help / color / mirror / Atom feed
From: Nicholas Piggin <npiggin@gmail.com>
To: linuxppc-dev@lists.ozlabs.org
Cc: Nicholas Piggin <npiggin@gmail.com>
Subject: [PATCH v4 11/17] powerpc/64: treat low kernel text as irqs soft-masked
Date: Fri, 18 Jun 2021 01:51:10 +1000	[thread overview]
Message-ID: <20210617155116.2167984-12-npiggin@gmail.com> (raw)
In-Reply-To: <20210617155116.2167984-1-npiggin@gmail.com>

Treat code below __end_soft_masked as soft-masked for the purpose
of alternate return. 64s already mostly does this for scv entry.

This will be used to exit from interrupts without disabling MSR[EE].

Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
---
 arch/powerpc/include/asm/interrupt.h | 11 ++++++++---
 arch/powerpc/kernel/exceptions-64e.S | 12 +++++++++++-
 arch/powerpc/kernel/exceptions-64s.S | 19 +++++++++++--------
 arch/powerpc/kernel/interrupt_64.S   |  6 +++++-
 4 files changed, 35 insertions(+), 13 deletions(-)

diff --git a/arch/powerpc/include/asm/interrupt.h b/arch/powerpc/include/asm/interrupt.h
index 49d9a6fd1bb9..88043e46442a 100644
--- a/arch/powerpc/include/asm/interrupt.h
+++ b/arch/powerpc/include/asm/interrupt.h
@@ -158,8 +158,13 @@ static inline void interrupt_enter_prepare(struct pt_regs *regs, struct interrup
 		 * CT_WARN_ON comes here via program_check_exception,
 		 * so avoid recursion.
 		 */
-		if (TRAP(regs) != INTERRUPT_PROGRAM)
+		if (TRAP(regs) != INTERRUPT_PROGRAM) {
 			CT_WARN_ON(ct_state() != CONTEXT_KERNEL);
+			BUG_ON(regs->nip < (unsigned long)__end_soft_masked);
+		}
+		/* Move this under a debugging check */
+		if (arch_irq_disabled_regs(regs))
+			BUG_ON(search_kernel_restart_table(regs->nip));
 	}
 #endif
 
@@ -254,8 +259,8 @@ static inline void interrupt_nmi_enter_prepare(struct pt_regs *regs, struct inte
 	local_paca->irq_happened |= PACA_IRQ_HARD_DIS;
 
 	if (IS_ENABLED(CONFIG_PPC_BOOK3S_64) && !(regs->msr & MSR_PR) &&
-				regs->nip < (unsigned long)__end_interrupts) {
-		// Kernel code running below __end_interrupts is
+				regs->nip < (unsigned long)__end_soft_masked) {
+		// Kernel code running below __end_soft_masked is
 		// implicitly soft-masked.
 		regs->softe = IRQS_ALL_DISABLED;
 	}
diff --git a/arch/powerpc/kernel/exceptions-64e.S b/arch/powerpc/kernel/exceptions-64e.S
index 1b79f8a75298..22fcd95dd8dc 100644
--- a/arch/powerpc/kernel/exceptions-64e.S
+++ b/arch/powerpc/kernel/exceptions-64e.S
@@ -342,7 +342,17 @@ ret_from_mc_except:
 #define PROLOG_ADDITION_MASKABLE_GEN(n)					    \
 	lbz	r10,PACAIRQSOFTMASK(r13);	/* are irqs soft-masked? */ \
 	andi.	r10,r10,IRQS_DISABLED;	/* yes -> go out of line */ \
-	bne	masked_interrupt_book3e_##n
+	bne	masked_interrupt_book3e_##n;				    \
+	/* Kernel code below __end_soft_masked is implicitly masked */	    \
+	andi.	r10,r11,MSR_PR;						    \
+	bne	1f;			/* user -> not masked */	    \
+	std	r14,PACA_EXGEN+EX_R14(r13);				    \
+	LOAD_REG_IMMEDIATE_SYM(r14, r10, __end_soft_masked);		    \
+	mfspr	r10,SPRN_SRR0;						    \
+	cmpld	r10,r14;						    \
+	ld	r14,PACA_EXGEN+EX_R14(r13);				    \
+	blt	masked_interrupt_book3e_##n;				    \
+1:
 
 /*
  * Additional regs must be re-loaded from paca before EXCEPTION_COMMON* is
diff --git a/arch/powerpc/kernel/exceptions-64s.S b/arch/powerpc/kernel/exceptions-64s.S
index 17a213f25c92..2d980addc88c 100644
--- a/arch/powerpc/kernel/exceptions-64s.S
+++ b/arch/powerpc/kernel/exceptions-64s.S
@@ -508,10 +508,13 @@ DEFINE_FIXED_SYMBOL(\name\()_common_real)
 		andi.	r10,r12,MSR_PR
 		bne	2f
 
-		/* Kernel code running below __end_interrupts is implicitly
-		 * soft-masked */
-		LOAD_HANDLER(r10, __end_interrupts)
+		/*
+		 * Kernel code running below __end_soft_masked is implicitly
+		 * soft-masked
+		 */
+		LOAD_HANDLER(r10, __end_soft_masked)
 		cmpld	r11,r10
+
 		li	r10,IMASK
 		blt-	1f
 
@@ -824,17 +827,17 @@ __start_interrupts:
  * scv instructions enter the kernel without changing EE, RI, ME, or HV.
  * In particular, this means we can take a maskable interrupt at any point
  * in the scv handler, which is unlike any other interrupt. This is solved
- * by treating the instruction addresses below __end_interrupts as being
+ * by treating the instruction addresses below __end_soft_masked as being
  * soft-masked.
  *
  * AIL-0 mode scv exceptions go to 0x17000-0x17fff, but we set AIL-3 and
  * ensure scv is never executed with relocation off, which means AIL-0
  * should never happen.
  *
- * Before leaving the below __end_interrupts text, at least of the following
- * must be true:
+ * Before leaving the following inside-__end_soft_masked text, at least of the
+ * following must be true:
  * - MSR[PR]=1 (i.e., return to userspace)
- * - MSR_EE|MSR_RI is set (no reentrant exceptions)
+ * - MSR_EE|MSR_RI is clear (no reentrant exceptions)
  * - Standard kernel environment is set up (stack, paca, etc)
  *
  * Call convention:
@@ -3099,7 +3102,7 @@ kvmppc_skip_Hinterrupt:
 
 USE_FIXED_SECTION(virt_trampolines)
 	/*
-	 * All code below __end_interrupts is treated as soft-masked. If
+	 * All code below __end_soft_masked is treated as soft-masked. If
 	 * any code runs here with MSR[EE]=1, it must then cope with pending
 	 * soft interrupt being raised (i.e., by ensuring it is replayed).
 	 *
diff --git a/arch/powerpc/kernel/interrupt_64.S b/arch/powerpc/kernel/interrupt_64.S
index ab6b99609d0e..33ee83791487 100644
--- a/arch/powerpc/kernel/interrupt_64.S
+++ b/arch/powerpc/kernel/interrupt_64.S
@@ -632,4 +632,8 @@ ALT_FTR_SECTION_END_IFCLR(CPU_FTR_STCX_CHECKS_ADDRESS)
 interrupt_return_macro srr
 #ifdef CONFIG_PPC_BOOK3S
 interrupt_return_macro hsrr
-#endif
+#endif /* CONFIG_PPC_BOOK3S */
+
+	.globl __end_soft_masked
+__end_soft_masked:
+DEFINE_FIXED_SYMBOL(__end_soft_masked)
-- 
2.23.0


  parent reply	other threads:[~2021-06-17 15:56 UTC|newest]

Thread overview: 20+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2021-06-17 15:50 [PATCH v4 00/17] powerpc/64: fast interrupt exits Nicholas Piggin
2021-06-17 15:51 ` [PATCH v4 01/17] powerpc/interrupt: Fix CONFIG ifdef typo Nicholas Piggin
2021-06-17 15:51 ` [PATCH v4 02/17] powerpc: remove interrupt exit helpers unused argument Nicholas Piggin
2021-06-17 15:51 ` [PATCH v4 03/17] powerpc/64s: introduce different functions to return from SRR vs HSRR interrupts Nicholas Piggin
2021-06-17 15:51 ` [PATCH v4 04/17] powerpc/64s: avoid reloading (H)SRR registers if they are still valid Nicholas Piggin
2021-06-17 15:51 ` [PATCH v4 05/17] powerpc/64: handle MSR EE and RI in interrupt entry wrapper Nicholas Piggin
2021-06-17 15:51 ` [PATCH v4 06/17] powerpc/64: move interrupt return asm to interrupt_64.S Nicholas Piggin
2021-06-17 15:51 ` [PATCH v4 07/17] powerpc/64s: system call avoid setting MSR[RI] until we set MSR[EE] Nicholas Piggin
2021-06-17 15:51 ` [PATCH v4 08/17] powerpc/64s: save one more register in the masked interrupt handler Nicholas Piggin
2021-06-17 15:51 ` [PATCH v4 09/17] powerpc/64: allow alternate return locations for soft-masked interrupts Nicholas Piggin
2021-06-17 15:51 ` [PATCH v4 10/17] powerpc/64: interrupt soft-enable race fix Nicholas Piggin
2022-05-16 16:36   ` Christophe Leroy
2021-06-17 15:51 ` Nicholas Piggin [this message]
2021-06-17 15:51 ` [PATCH v4 12/17] powerpc/64: use interrupt restart table to speed up return from interrupt Nicholas Piggin
2021-06-17 15:51 ` [PATCH v4 13/17] powerpc/interrupt: Rename and lightly change syscall_exit_prepare_main() Nicholas Piggin
2021-06-17 15:51 ` [PATCH v4 14/17] powerpc/interrupt: Refactor interrupt_exit_user_prepare() Nicholas Piggin
2021-06-17 15:51 ` [PATCH v4 15/17] powerpc/interrupt: Interchange prep_irq_for_{kernel_enabled/user}_exit() Nicholas Piggin
2021-06-17 15:51 ` [PATCH v4 16/17] powerpc/interrupt: Refactor prep_irq_for_{user/kernel_enabled}_exit() Nicholas Piggin
2021-06-17 15:51 ` [PATCH v4 17/17] powerpc/interrupt: Remove prep_irq_for_user_exit() Nicholas Piggin
2021-06-25  6:21 ` [PATCH v4 00/17] powerpc/64: fast interrupt exits Michael Ellerman

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20210617155116.2167984-12-npiggin@gmail.com \
    --to=npiggin@gmail.com \
    --cc=linuxppc-dev@lists.ozlabs.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).