From: Nicholas Piggin <npiggin@gmail.com>
To: linuxppc-dev@lists.ozlabs.org
Cc: Nicholas Piggin <npiggin@gmail.com>
Subject: [PATCH v2 00/16] powerpc: Make hash MMU code build configurable
Date: Thu, 21 Oct 2021 13:54:01 +1000 [thread overview]
Message-ID: <20211021035417.2157804-1-npiggin@gmail.com> (raw)
Now that there's a platform that can make good use of it, here's
a series that can prevent the hash MMU code being built for 64s
platforms that don't need it.
Since v1:
- Split out most of the Kconfig change from the conditional compilation
changes.
- Split out several more changes into preparatory patches.
- Reduced some ifdefs.
- Caught a few missing hash bits: pgtable dump, lkdtm,
memremap_compat_align.
Since RFC:
- Split out large code movement from other changes.
- Used mmu ftr test constant folding rather than adding new constant
true/false for radix_enabled().
- Restore tlbie trace point that had to be commented out in the
previous.
- Avoid minor (probably unreachable) behaviour change in machine check
handler when hash was not compiled.
- Fix microwatt updates so !HASH is not enforced.
- Rebase, build fixes.
Thanks,
Nick
Nicholas Piggin (16):
powerpc: Remove unused FW_FEATURE_NATIVE references
powerpc: Rename PPC_NATIVE to PPC_HASH_MMU_NATIVE
powerpc/pseries: Stop selecting PPC_HASH_MMU_NATIVE
powerpc/64s: Move and rename do_bad_slb_fault as it is not hash
specific
powerpc/pseries: move pseries_lpar_register_process_table() out from
hash specific code
powerpc/pseries: lparcfg don't include slb_size line in radix mode
powerpc/64s: move THP trace point creation out of hash specific file
powerpc/64s: Make flush_and_reload_slb a no-op when radix is enabled
powerpc/64s: move page size definitions from hash specific file
powerpc/64s: Rename hash_hugetlbpage.c to hugetlbpage.c
powerpc/64: pcpu setup avoid reading mmu_linear_psize on 64e or radix
powerpc/64e: remove mmu_linear_psize
powerpc/64s: Move hash MMU code under a new Kconfig name
powerpc/64s: Make hash MMU support configurable
powerpc/configs/microwatt: add POWER9_CPU
powerpc/microwatt: Don't select the hash MMU code
arch/powerpc/Kconfig | 3 +-
arch/powerpc/configs/microwatt_defconfig | 2 +-
arch/powerpc/include/asm/book3s/64/mmu.h | 19 ++-
.../include/asm/book3s/64/tlbflush-hash.h | 7 ++
arch/powerpc/include/asm/book3s/64/tlbflush.h | 4 -
arch/powerpc/include/asm/book3s/pgtable.h | 4 +
arch/powerpc/include/asm/firmware.h | 8 --
arch/powerpc/include/asm/interrupt.h | 2 +-
arch/powerpc/include/asm/mmu.h | 16 ++-
arch/powerpc/include/asm/mmu_context.h | 2 +
arch/powerpc/include/asm/paca.h | 8 ++
arch/powerpc/kernel/asm-offsets.c | 2 +
arch/powerpc/kernel/dt_cpu_ftrs.c | 14 ++-
arch/powerpc/kernel/entry_64.S | 4 +-
arch/powerpc/kernel/exceptions-64s.S | 20 +++-
arch/powerpc/kernel/mce.c | 2 +-
arch/powerpc/kernel/mce_power.c | 16 ++-
arch/powerpc/kernel/paca.c | 18 ++-
arch/powerpc/kernel/process.c | 13 +-
arch/powerpc/kernel/prom.c | 2 +
arch/powerpc/kernel/setup_64.c | 26 +++-
arch/powerpc/kexec/core_64.c | 4 +-
arch/powerpc/kexec/ranges.c | 4 +
arch/powerpc/kvm/Kconfig | 1 +
arch/powerpc/mm/book3s64/Makefile | 19 +--
arch/powerpc/mm/book3s64/hash_native.c | 104 ----------------
arch/powerpc/mm/book3s64/hash_pgtable.c | 1 -
arch/powerpc/mm/book3s64/hash_utils.c | 111 +++++++++++++++++-
.../{hash_hugetlbpage.c => hugetlbpage.c} | 2 +
arch/powerpc/mm/book3s64/mmu_context.c | 34 +++++-
arch/powerpc/mm/book3s64/pgtable.c | 8 ++
arch/powerpc/mm/book3s64/radix_pgtable.c | 4 +
arch/powerpc/mm/book3s64/slb.c | 16 ---
arch/powerpc/mm/book3s64/trace.c | 8 ++
arch/powerpc/mm/copro_fault.c | 2 +
arch/powerpc/mm/fault.c | 17 +++
arch/powerpc/mm/ioremap.c | 19 ++-
arch/powerpc/mm/nohash/tlb.c | 9 --
arch/powerpc/mm/pgtable.c | 10 +-
arch/powerpc/mm/ptdump/Makefile | 2 +-
arch/powerpc/platforms/52xx/Kconfig | 2 +-
arch/powerpc/platforms/Kconfig | 4 +-
arch/powerpc/platforms/Kconfig.cputype | 21 +++-
arch/powerpc/platforms/cell/Kconfig | 3 +-
arch/powerpc/platforms/chrp/Kconfig | 2 +-
arch/powerpc/platforms/embedded6xx/Kconfig | 2 +-
arch/powerpc/platforms/maple/Kconfig | 3 +-
arch/powerpc/platforms/microwatt/Kconfig | 1 -
arch/powerpc/platforms/pasemi/Kconfig | 3 +-
arch/powerpc/platforms/powermac/Kconfig | 3 +-
arch/powerpc/platforms/powernv/Kconfig | 2 +-
arch/powerpc/platforms/powernv/idle.c | 2 +
arch/powerpc/platforms/powernv/setup.c | 2 +
arch/powerpc/platforms/pseries/Kconfig | 1 -
arch/powerpc/platforms/pseries/lpar.c | 67 ++++++-----
arch/powerpc/platforms/pseries/lparcfg.c | 5 +-
arch/powerpc/platforms/pseries/mobility.c | 6 +
arch/powerpc/platforms/pseries/ras.c | 2 +
arch/powerpc/platforms/pseries/reconfig.c | 2 +
arch/powerpc/platforms/pseries/setup.c | 6 +-
arch/powerpc/xmon/xmon.c | 8 +-
drivers/misc/lkdtm/Makefile | 2 +-
drivers/misc/lkdtm/core.c | 2 +-
63 files changed, 448 insertions(+), 270 deletions(-)
rename arch/powerpc/mm/book3s64/{hash_hugetlbpage.c => hugetlbpage.c} (99%)
create mode 100644 arch/powerpc/mm/book3s64/trace.c
--
2.23.0
next reply other threads:[~2021-10-21 3:55 UTC|newest]
Thread overview: 27+ messages / expand[flat|nested] mbox.gz Atom feed top
2021-10-21 3:54 Nicholas Piggin [this message]
2021-10-21 3:54 ` [PATCH v2 01/16] powerpc: Remove unused FW_FEATURE_NATIVE references Nicholas Piggin
2021-10-21 3:54 ` [PATCH v2 02/16] powerpc: Rename PPC_NATIVE to PPC_HASH_MMU_NATIVE Nicholas Piggin
2021-10-21 3:54 ` [PATCH v2 03/16] powerpc/pseries: Stop selecting PPC_HASH_MMU_NATIVE Nicholas Piggin
2021-10-21 3:54 ` [PATCH v2 04/16] powerpc/64s: Move and rename do_bad_slb_fault as it is not hash specific Nicholas Piggin
2021-10-21 3:54 ` [PATCH v2 05/16] powerpc/pseries: move pseries_lpar_register_process_table() out from hash specific code Nicholas Piggin
2021-10-21 3:54 ` [PATCH v2 06/16] powerpc/pseries: lparcfg don't include slb_size line in radix mode Nicholas Piggin
2021-10-21 3:54 ` [PATCH v2 07/16] powerpc/64s: move THP trace point creation out of hash specific file Nicholas Piggin
2021-10-21 3:54 ` [PATCH v2 08/16] powerpc/64s: Make flush_and_reload_slb a no-op when radix is enabled Nicholas Piggin
2021-10-21 3:54 ` [PATCH v2 09/16] powerpc/64s: move page size definitions from hash specific file Nicholas Piggin
2021-10-21 3:54 ` [PATCH v2 10/16] powerpc/64s: Rename hash_hugetlbpage.c to hugetlbpage.c Nicholas Piggin
2021-10-21 3:54 ` [PATCH v2 11/16] powerpc/64: pcpu setup avoid reading mmu_linear_psize on 64e or radix Nicholas Piggin
2021-10-21 4:52 ` Christophe Leroy
2021-10-21 7:13 ` Nicholas Piggin
2021-10-21 3:54 ` [PATCH v2 12/16] powerpc/64e: remove mmu_linear_psize Nicholas Piggin
2021-10-21 5:03 ` Christophe Leroy
2021-10-21 7:15 ` Nicholas Piggin
2021-10-21 3:54 ` [PATCH v2 13/16] powerpc/64s: Move hash MMU code under a new Kconfig name Nicholas Piggin
2021-10-21 5:43 ` Christophe Leroy
2021-10-21 7:33 ` Nicholas Piggin
2021-10-21 3:54 ` [PATCH v2 14/16] powerpc/64s: Make hash MMU support configurable Nicholas Piggin
2021-10-21 5:44 ` Christophe Leroy
2021-10-21 3:54 ` [PATCH v2 15/16] powerpc/configs/microwatt: add POWER9_CPU Nicholas Piggin
2021-10-21 3:54 ` [PATCH v2 16/16] powerpc/microwatt: Don't select the hash MMU code Nicholas Piggin
2021-10-21 5:19 ` Joel Stanley
2021-10-21 7:38 ` Nicholas Piggin
2021-10-21 5:47 ` Christophe Leroy
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20211021035417.2157804-1-npiggin@gmail.com \
--to=npiggin@gmail.com \
--cc=linuxppc-dev@lists.ozlabs.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).