From: Nicholas Piggin <npiggin@gmail.com>
To: Andrew Morton <akpm@linux-foundation.org>
Cc: linux-arch@vger.kernel.org, Randy Dunlap <rdunlap@infradead.org>,
linux-kernel@vger.kernel.org, Nicholas Piggin <npiggin@gmail.com>,
Andy Lutomirski <luto@kernel.org>,
linuxppc-dev@lists.ozlabs.org
Subject: [PATCH v5 3/4] lazy tlb: shoot lazies, a non-refcounting lazy tlb option
Date: Tue, 9 Nov 2021 14:11:18 +1000 [thread overview]
Message-ID: <20211109041119.1972927-4-npiggin@gmail.com> (raw)
In-Reply-To: <20211109041119.1972927-1-npiggin@gmail.com>
On big systems, the mm refcount can become highly contented when doing
a lot of context switching with threaded applications (particularly
switching between the idle thread and an application thread).
Abandoning lazy tlb slows switching down quite a bit in the important
user->idle->user cases, so instead implement a non-refcounted scheme
that causes __mmdrop() to IPI all CPUs in the mm_cpumask and shoot down
any remaining lazy ones.
Shootdown IPIs are some concern, but they have not been observed to be
a big problem with this scheme (the powerpc implementation generated
314 additional interrupts on a 144 CPU system during a kernel compile).
There are a number of strategies that could be employed to reduce IPIs
if they turn out to be a problem for some workload.
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
---
arch/Kconfig | 15 +++++++++++++++
kernel/fork.c | 51 +++++++++++++++++++++++++++++++++++++++++++++++++++
2 files changed, 66 insertions(+)
diff --git a/arch/Kconfig b/arch/Kconfig
index 73d98edc5cdc..2b70a9e7b142 100644
--- a/arch/Kconfig
+++ b/arch/Kconfig
@@ -444,6 +444,21 @@ config ARCH_WANT_IRQS_OFF_ACTIVATE_MM
# already).
config MMU_LAZY_TLB_REFCOUNT
def_bool y
+ depends on !MMU_LAZY_TLB_SHOOTDOWN
+
+# This option allows MMU_LAZY_TLB_REFCOUNT=n. It ensures no CPUs are using an
+# mm as a lazy tlb beyond its last reference count, by shooting down these
+# users before the mm is deallocated. __mmdrop() first IPIs all CPUs that may
+# be using the mm as a lazy tlb, so that they may switch themselves to using
+# init_mm for their active mm. mm_cpumask(mm) is used to determine which CPUs
+# may be using mm as a lazy tlb mm.
+#
+# To implement this, an arch *must*:
+# - At the time of the final mmdrop of the mm, ensure mm_cpumask(mm) contains
+# at least all possible CPUs in which the mm is lazy.
+# - It must meet the requirements for MMU_LAZY_TLB_REFCOUNT=n (see above).
+config MMU_LAZY_TLB_SHOOTDOWN
+ bool
config ARCH_HAVE_NMI_SAFE_CMPXCHG
bool
diff --git a/kernel/fork.c b/kernel/fork.c
index 38681ad44c76..a7da9b0bc402 100644
--- a/kernel/fork.c
+++ b/kernel/fork.c
@@ -686,6 +686,53 @@ static void check_mm(struct mm_struct *mm)
#define allocate_mm() (kmem_cache_alloc(mm_cachep, GFP_KERNEL))
#define free_mm(mm) (kmem_cache_free(mm_cachep, (mm)))
+static void do_shoot_lazy_tlb(void *arg)
+{
+ struct mm_struct *mm = arg;
+
+ if (current->active_mm == mm) {
+ WARN_ON_ONCE(current->mm);
+ current->active_mm = &init_mm;
+ switch_mm(mm, &init_mm, current);
+ }
+}
+
+static void do_check_lazy_tlb(void *arg)
+{
+ struct mm_struct *mm = arg;
+
+ WARN_ON_ONCE(current->active_mm == mm);
+}
+
+static void shoot_lazy_tlbs(struct mm_struct *mm)
+{
+ if (IS_ENABLED(CONFIG_MMU_LAZY_TLB_SHOOTDOWN)) {
+ /*
+ * IPI overheads have not found to be expensive, but they could
+ * be reduced in a number of possible ways, for example (in
+ * roughly increasing order of complexity):
+ * - A batch of mms requiring IPIs could be gathered and freed
+ * at once.
+ * - CPUs could store their active mm somewhere that can be
+ * remotely checked without a lock, to filter out
+ * false-positives in the cpumask.
+ * - After mm_users or mm_count reaches zero, switching away
+ * from the mm could clear mm_cpumask to reduce some IPIs
+ * (some batching or delaying would help).
+ * - A delayed freeing and RCU-like quiescing sequence based on
+ * mm switching to avoid IPIs completely.
+ */
+ on_each_cpu_mask(mm_cpumask(mm), do_shoot_lazy_tlb, (void *)mm, 1);
+ if (IS_ENABLED(CONFIG_DEBUG_VM))
+ on_each_cpu(do_check_lazy_tlb, (void *)mm, 1);
+ } else {
+ /*
+ * In this case, lazy tlb mms are refounted and would not reach
+ * __mmdrop until all CPUs have switched away and mmdrop()ed.
+ */
+ }
+}
+
/*
* Called when the last reference to the mm
* is dropped: either by a lazy thread or by
@@ -695,6 +742,10 @@ void __mmdrop(struct mm_struct *mm)
{
BUG_ON(mm == &init_mm);
WARN_ON_ONCE(mm == current->mm);
+
+ /* Ensure no CPUs are using this as their lazy tlb mm */
+ shoot_lazy_tlbs(mm);
+
WARN_ON_ONCE(mm == current->active_mm);
mm_free_pgd(mm);
destroy_context(mm);
--
2.23.0
next prev parent reply other threads:[~2021-11-09 4:14 UTC|newest]
Thread overview: 5+ messages / expand[flat|nested] mbox.gz Atom feed top
2021-11-09 4:11 [PATCH v5 0/4] shoot lazy tlbs Nicholas Piggin
2021-11-09 4:11 ` [PATCH v5 1/4] lazy tlb: introduce lazy mm refcount helper functions Nicholas Piggin
2021-11-09 4:11 ` [PATCH v5 2/4] lazy tlb: allow lazy tlb mm refcounting to be configurable Nicholas Piggin
2021-11-09 4:11 ` Nicholas Piggin [this message]
2021-11-09 4:11 ` [PATCH v5 4/4] powerpc/64s: enable MMU_LAZY_TLB_SHOOTDOWN Nicholas Piggin
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20211109041119.1972927-4-npiggin@gmail.com \
--to=npiggin@gmail.com \
--cc=akpm@linux-foundation.org \
--cc=linux-arch@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linuxppc-dev@lists.ozlabs.org \
--cc=luto@kernel.org \
--cc=rdunlap@infradead.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).