From: Arnd Bergmann <arnd@kernel.org>
Cc: linux-arch@vger.kernel.org, linux-scsi@vger.kernel.org,
Arnd Bergmann <arnd@arndb.de>,
linux-m68k@lists.linux-m68k.org,
Greg Kroah-Hartman <gregkh@linuxfoundation.org>,
Martyn Welch <martyn@welchs.me.uk>,
Manohar Vanga <manohar.vanga@gmail.com>,
linuxppc-dev@lists.ozlabs.org, Denis Efremov <efremov@linux.com>,
Christoph Hellwig <hch@infradead.org>,
iommu@lists.linux-foundation.org, linux-parisc@vger.kernel.org,
linux-alpha@vger.kernel.org, Jakub Kicinski <kuba@kernel.org>,
Khalid Aziz <khalid@gonehiking.org>,
Robin Murphy <robin.murphy@arm.com>,
Marek Szyprowski <m.szyprowski@samsung.com>
Subject: [PATCH 0/6] phase out CONFIG_VIRT_TO_BUS
Date: Mon, 6 Jun 2022 10:41:03 +0200 [thread overview]
Message-ID: <20220606084109.4108188-1-arnd@kernel.org> (raw)
From: Arnd Bergmann <arnd@arndb.de>
The virt_to_bus/bus_to_virt interface has been deprecated for
decades. After Jakub Kicinski put a lot of work into cleaning out the
network drivers using them, there are only a couple of other drivers
left, which can all be removed or otherwise cleaned up, to remove the
old interface for good.
Any out of tree drivers using virt_to_bus() should be converted to
using the dma-mapping interfaces, typically dma_alloc_coherent()
or dma_map_single()).
There are a few m68k and ppc32 specific drivers that keep using the
interfaces, but these are all guarded with architecture-specific
Kconfig dependencies, and are not actually broken.
There are still a number of drivers that are using virt_to_phys()
and phys_to_virt() in place of dma-mapping operations, and these
are often broken, but they are out of scope for this series.
Arnd
Cc: Jakub Kicinski <kuba@kernel.org>
Cc: Christoph Hellwig <hch@infradead.org> # dma-mapping
Cc: Marek Szyprowski <m.szyprowski@samsung.com> # dma-mapping
Cc: Robin Murphy <robin.murphy@arm.com> # dma-mapping
Cc: iommu@lists.linux-foundation.org
Cc: Khalid Aziz <khalid@gonehiking.org> # buslogic
Cc: linux-scsi@vger.kernel.org
Cc: Manohar Vanga <manohar.vanga@gmail.com> # vme
Cc: Martyn Welch <martyn@welchs.me.uk> # vme
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> # vme
Cc: linuxppc-dev@lists.ozlabs.org
Cc: linux-arch@vger.kernel.org
Cc: linux-alpha@vger.kernel.org
Cc: linux-m68k@lists.linux-m68k.org
Cc: linux-parisc@vger.kernel.org
Cc: Denis Efremov <efremov@linux.com> # floppy
Arnd Bergmann (6):
vme: remove ca91cx42 Universe-II support
vme: move back to staging
media: sta2x11: remove VIRT_TO_BUS dependency
scsi: dpt_i2o: drop stale VIRT_TO_BUS dependency
scsi: remove stale BusLogic driver
arch/*/: remove CONFIG_VIRT_TO_BUS
.../core-api/bus-virt-phys-mapping.rst | 220 -
Documentation/core-api/dma-api-howto.rst | 14 -
Documentation/core-api/index.rst | 1 -
Documentation/driver-api/vme.rst | 4 +-
Documentation/scsi/BusLogic.rst | 581 --
Documentation/scsi/FlashPoint.rst | 176 -
.../translations/zh_CN/core-api/index.rst | 1 -
MAINTAINERS | 11 +-
arch/alpha/Kconfig | 1 -
arch/alpha/include/asm/floppy.h | 2 +-
arch/alpha/include/asm/io.h | 8 +-
arch/ia64/Kconfig | 1 -
arch/ia64/include/asm/io.h | 8 -
arch/m68k/Kconfig | 1 -
arch/m68k/include/asm/virtconvert.h | 4 +-
arch/microblaze/Kconfig | 1 -
arch/microblaze/include/asm/io.h | 2 -
arch/mips/Kconfig | 1 -
arch/mips/include/asm/io.h | 9 -
arch/parisc/Kconfig | 1 -
arch/parisc/include/asm/floppy.h | 4 +-
arch/parisc/include/asm/io.h | 2 -
arch/powerpc/Kconfig | 1 -
arch/powerpc/include/asm/io.h | 2 -
arch/riscv/include/asm/page.h | 1 -
arch/x86/Kconfig | 1 -
arch/x86/include/asm/io.h | 9 -
arch/xtensa/Kconfig | 1 -
arch/xtensa/include/asm/io.h | 3 -
drivers/Kconfig | 2 -
drivers/Makefile | 1 -
drivers/media/pci/sta2x11/Kconfig | 2 +-
drivers/scsi/BusLogic.c | 3727 --------
drivers/scsi/BusLogic.h | 1284 ---
drivers/scsi/FlashPoint.c | 7560 -----------------
drivers/scsi/Kconfig | 26 +-
drivers/scsi/dpt_i2o.c | 4 +-
drivers/staging/vme_user/Kconfig | 27 +
drivers/staging/vme_user/Makefile | 3 +
drivers/{vme => staging/vme_user}/vme.c | 2 +-
.../linux => drivers/staging/vme_user}/vme.h | 0
.../{vme => staging/vme_user}/vme_bridge.h | 2 +-
.../bridges => staging/vme_user}/vme_fake.c | 4 +-
.../bridges => staging/vme_user}/vme_tsi148.c | 4 +-
.../bridges => staging/vme_user}/vme_tsi148.h | 0
drivers/staging/vme_user/vme_user.c | 2 +-
drivers/vme/Kconfig | 18 -
drivers/vme/Makefile | 8 -
drivers/vme/boards/Kconfig | 10 -
drivers/vme/boards/Makefile | 6 -
drivers/vme/boards/vme_vmivme7805.c | 106 -
drivers/vme/boards/vme_vmivme7805.h | 33 -
drivers/vme/bridges/Kconfig | 24 -
drivers/vme/bridges/Makefile | 4 -
drivers/vme/bridges/vme_ca91cx42.c | 1928 -----
drivers/vme/bridges/vme_ca91cx42.h | 579 --
include/asm-generic/io.h | 14 -
mm/Kconfig | 8 -
58 files changed, 54 insertions(+), 16405 deletions(-)
delete mode 100644 Documentation/core-api/bus-virt-phys-mapping.rst
delete mode 100644 Documentation/scsi/BusLogic.rst
delete mode 100644 Documentation/scsi/FlashPoint.rst
delete mode 100644 drivers/scsi/BusLogic.c
delete mode 100644 drivers/scsi/BusLogic.h
delete mode 100644 drivers/scsi/FlashPoint.c
rename drivers/{vme => staging/vme_user}/vme.c (99%)
rename {include/linux => drivers/staging/vme_user}/vme.h (100%)
rename drivers/{vme => staging/vme_user}/vme_bridge.h (99%)
rename drivers/{vme/bridges => staging/vme_user}/vme_fake.c (99%)
rename drivers/{vme/bridges => staging/vme_user}/vme_tsi148.c (99%)
rename drivers/{vme/bridges => staging/vme_user}/vme_tsi148.h (100%)
delete mode 100644 drivers/vme/Kconfig
delete mode 100644 drivers/vme/Makefile
delete mode 100644 drivers/vme/boards/Kconfig
delete mode 100644 drivers/vme/boards/Makefile
delete mode 100644 drivers/vme/boards/vme_vmivme7805.c
delete mode 100644 drivers/vme/boards/vme_vmivme7805.h
delete mode 100644 drivers/vme/bridges/Kconfig
delete mode 100644 drivers/vme/bridges/Makefile
delete mode 100644 drivers/vme/bridges/vme_ca91cx42.c
delete mode 100644 drivers/vme/bridges/vme_ca91cx42.h
--
2.29.2
next reply other threads:[~2022-06-06 8:42 UTC|newest]
Thread overview: 16+ messages / expand[flat|nested] mbox.gz Atom feed top
2022-06-06 8:41 Arnd Bergmann [this message]
2022-06-06 8:41 ` [PATCH 1/6] vme: remove ca91cx42 Universe-II support Arnd Bergmann
2022-06-06 8:41 ` [PATCH 2/6] vme: move back to staging Arnd Bergmann
2022-06-06 8:41 ` [PATCH 3/6] media: sta2x11: remove VIRT_TO_BUS dependency Arnd Bergmann
2022-06-06 8:41 ` [PATCH 4/6] scsi: dpt_i2o: drop stale " Arnd Bergmann
2022-06-06 8:41 ` [PATCH 5/6] scsi: remove stale BusLogic driver Arnd Bergmann
2022-06-06 10:40 ` Maciej W. Rozycki
2022-06-06 15:00 ` Arnd Bergmann
2022-06-06 16:35 ` Khalid Aziz
2022-06-08 8:19 ` Arnd Bergmann
2022-06-06 8:41 ` [PATCH 6/6] arch/*/: remove CONFIG_VIRT_TO_BUS Arnd Bergmann
2022-06-07 7:29 ` Geert Uytterhoeven
2022-06-07 12:33 ` Michael Ellerman
2022-06-06 9:25 ` [PATCH 0/6] phase out CONFIG_VIRT_TO_BUS Greg Kroah-Hartman
2022-06-06 15:01 ` Arnd Bergmann
2022-06-07 9:09 ` Martyn Welch
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20220606084109.4108188-1-arnd@kernel.org \
--to=arnd@kernel.org \
--cc=arnd@arndb.de \
--cc=efremov@linux.com \
--cc=gregkh@linuxfoundation.org \
--cc=hch@infradead.org \
--cc=iommu@lists.linux-foundation.org \
--cc=khalid@gonehiking.org \
--cc=kuba@kernel.org \
--cc=linux-alpha@vger.kernel.org \
--cc=linux-arch@vger.kernel.org \
--cc=linux-m68k@lists.linux-m68k.org \
--cc=linux-parisc@vger.kernel.org \
--cc=linux-scsi@vger.kernel.org \
--cc=linuxppc-dev@lists.ozlabs.org \
--cc=m.szyprowski@samsung.com \
--cc=manohar.vanga@gmail.com \
--cc=martyn@welchs.me.uk \
--cc=robin.murphy@arm.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).