From: Laurent Dufour <ldufour@linux.ibm.com>
To: wim@linux-watchdog.org, linux@roeck-us.net, mpe@ellerman.id.au,
benh@kernel.crashing.org, paulus@samba.org,
nathanl@linux.ibm.com, haren@linux.vnet.ibm.com,
npiggin@gmail.com
Cc: linuxppc-dev@lists.ozlabs.org, linux-kernel@vger.kernel.org,
linux-watchdog@vger.kernel.org
Subject: [PATCH v3 3/4] powerpc/watchdog: introduce a NMI watchdog's factor
Date: Mon, 27 Jun 2022 15:53:46 +0200 [thread overview]
Message-ID: <20220627135347.32624-4-ldufour@linux.ibm.com> (raw)
In-Reply-To: <20220627135347.32624-1-ldufour@linux.ibm.com>
Introduce a factor which would apply to the NMI watchdog timeout.
This factor is a percentage added to the watchdog_tresh value. The value is
set under the watchdog_mutex protection and lockup_detector_reconfigure()
is called to recompute wd_panic_timeout_tb.
Once the factor is set, it remains until it is set back to 0, which means
no impact.
Signed-off-by: Laurent Dufour <ldufour@linux.ibm.com>
---
arch/powerpc/include/asm/nmi.h | 2 ++
arch/powerpc/kernel/watchdog.c | 21 ++++++++++++++++++++-
2 files changed, 22 insertions(+), 1 deletion(-)
diff --git a/arch/powerpc/include/asm/nmi.h b/arch/powerpc/include/asm/nmi.h
index ea0e487f87b1..7d6a8d9b0543 100644
--- a/arch/powerpc/include/asm/nmi.h
+++ b/arch/powerpc/include/asm/nmi.h
@@ -5,8 +5,10 @@
#ifdef CONFIG_PPC_WATCHDOG
extern void arch_touch_nmi_watchdog(void);
long soft_nmi_interrupt(struct pt_regs *regs);
+void watchdog_nmi_set_lpm_factor(u64 factor);
#else
static inline void arch_touch_nmi_watchdog(void) {}
+static inline void watchdog_nmi_set_lpm_factor(u64 factor) {}
#endif
#ifdef CONFIG_NMI_IPI
diff --git a/arch/powerpc/kernel/watchdog.c b/arch/powerpc/kernel/watchdog.c
index 7d28b9553654..80851b228f71 100644
--- a/arch/powerpc/kernel/watchdog.c
+++ b/arch/powerpc/kernel/watchdog.c
@@ -91,6 +91,10 @@ static cpumask_t wd_smp_cpus_pending;
static cpumask_t wd_smp_cpus_stuck;
static u64 wd_smp_last_reset_tb;
+#ifdef CONFIG_PPC_PSERIES
+static u64 wd_factor;
+#endif
+
/*
* Try to take the exclusive watchdog action / NMI IPI / printing lock.
* wd_smp_lock must be held. If this fails, we should return and wait
@@ -527,7 +531,13 @@ static int stop_watchdog_on_cpu(unsigned int cpu)
static void watchdog_calc_timeouts(void)
{
- wd_panic_timeout_tb = watchdog_thresh * ppc_tb_freq;
+ u64 threshold = watchdog_thresh;
+
+#ifdef CONFIG_PPC_PSERIES
+ threshold += (READ_ONCE(wd_factor) * threshold) / 100;
+#endif
+
+ wd_panic_timeout_tb = threshold * ppc_tb_freq;
/* Have the SMP detector trigger a bit later */
wd_smp_panic_timeout_tb = wd_panic_timeout_tb * 3 / 2;
@@ -570,3 +580,12 @@ int __init watchdog_nmi_probe(void)
}
return 0;
}
+
+#ifdef CONFIG_PPC_PSERIES
+void watchdog_nmi_set_lpm_factor(u64 factor)
+{
+ pr_info("Set the NMI watchdog factor to %llu%%\n", factor);
+ WRITE_ONCE(wd_factor, factor);
+ lockup_detector_reconfigure();
+}
+#endif
--
2.36.1
next prev parent reply other threads:[~2022-06-27 13:54 UTC|newest]
Thread overview: 14+ messages / expand[flat|nested] mbox.gz Atom feed top
2022-06-27 13:53 [PATCH v3 0/4] Extending NMI watchdog during LPM Laurent Dufour
2022-06-27 13:53 ` [PATCH v3 1/4] powerpc/mobility: wait for memory transfer to complete Laurent Dufour
2022-07-12 1:33 ` Nicholas Piggin
2022-07-12 9:38 ` Laurent Dufour
2022-06-27 13:53 ` [PATCH v3 2/4] watchdog: export lockup_detector_reconfigure Laurent Dufour
2022-06-27 13:53 ` Laurent Dufour [this message]
2022-07-12 1:42 ` [PATCH v3 3/4] powerpc/watchdog: introduce a NMI watchdog's factor Nicholas Piggin
2022-07-12 9:51 ` Laurent Dufour
2022-06-27 13:53 ` [PATCH v3 4/4] pseries/mobility: set NMI watchdog factor during LPM Laurent Dufour
2022-07-12 1:46 ` Nicholas Piggin
2022-07-12 9:47 ` Laurent Dufour
2022-07-13 14:22 ` Laurent Dufour
2022-07-12 1:21 ` [PATCH v3 0/4] Extending NMI watchdog " Nicholas Piggin
2022-07-12 9:32 ` Laurent Dufour
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20220627135347.32624-4-ldufour@linux.ibm.com \
--to=ldufour@linux.ibm.com \
--cc=benh@kernel.crashing.org \
--cc=haren@linux.vnet.ibm.com \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-watchdog@vger.kernel.org \
--cc=linux@roeck-us.net \
--cc=linuxppc-dev@lists.ozlabs.org \
--cc=mpe@ellerman.id.au \
--cc=nathanl@linux.ibm.com \
--cc=npiggin@gmail.com \
--cc=paulus@samba.org \
--cc=wim@linux-watchdog.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).