[PATCH AUTOSEL 5.15 02/18] powerpc/xive/spapr: correct bitmap allocation size

[PATCH AUTOSEL 5.15 02/18] powerpc/xive/spapr: correct bitmap allocation size

[Sasha Levin]

From: Nathan Lynch <nathanl@linux.ibm.com>

[ Upstream commit 19fc5bb93c6bbdce8292b4d7eed04e2fa118d2fe ]

kasan detects access beyond the end of the xibm->bitmap allocation:

BUG: KASAN: slab-out-of-bounds in _find_first_zero_bit+0x40/0x140
Read of size 8 at addr c00000001d1d0118 by task swapper/0/1

CPU: 0 PID: 1 Comm: swapper/0 Not tainted 5.19.0-rc2-00001-g90df023b36dd #28
Call Trace:
[c00000001d98f770] [c0000000012baab8] dump_stack_lvl+0xac/0x108 (unreliable)
[c00000001d98f7b0] [c00000000068faac] print_report+0x37c/0x710
[c00000001d98f880] [c0000000006902c0] kasan_report+0x110/0x354
[c00000001d98f950] [c000000000692324] __asan_load8+0xa4/0xe0
[c00000001d98f970] [c0000000011c6ed0] _find_first_zero_bit+0x40/0x140
[c00000001d98f9b0] [c0000000000dbfbc] xive_spapr_get_ipi+0xcc/0x260
[c00000001d98fa70] [c0000000000d6d28] xive_setup_cpu_ipi+0x1e8/0x450
[c00000001d98fb30] [c000000004032a20] pSeries_smp_probe+0x5c/0x118
[c00000001d98fb60] [c000000004018b44] smp_prepare_cpus+0x944/0x9ac
[c00000001d98fc90] [c000000004009f9c] kernel_init_freeable+0x2d4/0x640
[c00000001d98fd90] [c0000000000131e8] kernel_init+0x28/0x1d0
[c00000001d98fe10] [c00000000000cd54] ret_from_kernel_thread+0x5c/0x64

Allocated by task 0:
 kasan_save_stack+0x34/0x70
 __kasan_kmalloc+0xb4/0xf0
 __kmalloc+0x268/0x540
 xive_spapr_init+0x4d0/0x77c
 pseries_init_irq+0x40/0x27c
 init_IRQ+0x44/0x84
 start_kernel+0x2a4/0x538
 start_here_common+0x1c/0x20

The buggy address belongs to the object at c00000001d1d0118
 which belongs to the cache kmalloc-8 of size 8
The buggy address is located 0 bytes inside of
 8-byte region [c00000001d1d0118, c00000001d1d0120)

The buggy address belongs to the physical page:
page:c00c000000074740 refcount:1 mapcount:0 mapping:0000000000000000 index:0xc00000001d1d0558 pfn:0x1d1d
flags: 0x7ffff000000200(slab|node=0|zone=0|lastcpupid=0x7ffff)
raw: 007ffff000000200 c00000001d0003c8 c00000001d0003c8 c00000001d010480
raw: c00000001d1d0558 0000000001e1000a 00000001ffffffff 0000000000000000
page dumped because: kasan: bad access detected

Memory state around the buggy address:
 c00000001d1d0000: fc 00 fc fc fc fc fc fc fc fc fc fc fc fc fc fc
 c00000001d1d0080: fc fc 00 fc fc fc fc fc fc fc fc fc fc fc fc fc
>c00000001d1d0100: fc fc fc 02 fc fc fc fc fc fc fc fc fc fc fc fc
                            ^
 c00000001d1d0180: fc fc fc fc 04 fc fc fc fc fc fc fc fc fc fc fc
 c00000001d1d0200: fc fc fc fc fc 04 fc fc fc fc fc fc fc fc fc fc

This happens because the allocation uses the wrong unit (bits) when it
should pass (BITS_TO_LONGS(count) * sizeof(long)) or equivalent. With small
numbers of bits, the allocated object can be smaller than sizeof(long),
which results in invalid accesses.

Use bitmap_zalloc() to allocate and initialize the irq bitmap, paired with
bitmap_free() for consistency.

Signed-off-by: Nathan Lynch <nathanl@linux.ibm.com>
Reviewed-by: Cédric Le Goater <clg@kaod.org>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20220623182509.3985625-1-nathanl@linux.ibm.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 arch/powerpc/sysdev/xive/spapr.c | 5 +++--
 1 file changed, 3 insertions(+), 2 deletions(-)

diff --git a/arch/powerpc/sysdev/xive/spapr.c b/arch/powerpc/sysdev/xive/spapr.c
index a82f32fbe772..583b2c6df390 100644
--- a/arch/powerpc/sysdev/xive/spapr.c
+++ b/arch/powerpc/sysdev/xive/spapr.c
@@ -13,6 +13,7 @@
 #include <linux/of.h>
 #include <linux/slab.h>
 #include <linux/spinlock.h>
+#include <linux/bitmap.h>
 #include <linux/cpumask.h>
 #include <linux/mm.h>
 #include <linux/delay.h>
@@ -55,7 +56,7 @@ static int xive_irq_bitmap_add(int base, int count)
 	spin_lock_init(&xibm->lock);
 	xibm->base = base;
 	xibm->count = count;
-	xibm->bitmap = kzalloc(xibm->count, GFP_KERNEL);
+	xibm->bitmap = bitmap_zalloc(xibm->count, GFP_KERNEL);
 	if (!xibm->bitmap) {
 		kfree(xibm);
 		return -ENOMEM;
@@ -73,7 +74,7 @@ static void xive_irq_bitmap_remove_all(void)
 
 	list_for_each_entry_safe(xibm, tmp, &xive_irq_bitmaps, list) {
 		list_del(&xibm->list);
-		kfree(xibm->bitmap);
+		bitmap_free(xibm->bitmap);
 		kfree(xibm);
 	}
 }
-- 
2.35.1

[PATCH AUTOSEL 5.15 09/18] cpufreq: pmac32-cpufreq: Fix refcount leak bug

[Sasha Levin]

From: Liang He <windhl@126.com>

[ Upstream commit ccd7567d4b6cf187fdfa55f003a9e461ee629e36 ]

In pmac_cpufreq_init_MacRISC3(), we need to add corresponding
of_node_put() for the three node pointers whose refcount have
been incremented by of_find_node_by_name().

Signed-off-by: Liang He <windhl@126.com>
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/cpufreq/pmac32-cpufreq.c | 4 ++++
 1 file changed, 4 insertions(+)

diff --git a/drivers/cpufreq/pmac32-cpufreq.c b/drivers/cpufreq/pmac32-cpufreq.c
index 4f20c6a9108d..8e41fe9ee870 100644
--- a/drivers/cpufreq/pmac32-cpufreq.c
+++ b/drivers/cpufreq/pmac32-cpufreq.c
@@ -470,6 +470,10 @@ static int pmac_cpufreq_init_MacRISC3(struct device_node *cpunode)
 	if (slew_done_gpio_np)
 		slew_done_gpio = read_gpio(slew_done_gpio_np);
 
+	of_node_put(volt_gpio_np);
+	of_node_put(freq_gpio_np);
+	of_node_put(slew_done_gpio_np);
+
 	/* If we use the frequency GPIOs, calculate the min/max speeds based
 	 * on the bus frequencies
 	 */
-- 
2.35.1