Re: [PATCH kernel] powerpc/iommu: Add iommu_ops to report capabilities and allow blocking domains

[Jason Gunthorpe <jgg@nvidia.com>]

On Thu, Jul 07, 2022 at 11:55:52PM +1000, Alexey Kardashevskiy wrote:
> Historically PPC64 managed to avoid using iommu_ops. The VFIO driver
> uses a SPAPR TCE sub-driver and all iommu_ops uses were kept in
> the Type1 VFIO driver. Recent development though has added a coherency
> capability check to the generic part of VFIO and essentially disabled
> VFIO on PPC64; the similar story about iommu_group_dma_owner_claimed().
> 
> This adds an iommu_ops stub which reports support for cache
> coherency. Because bus_set_iommu() triggers IOMMU probing of PCI devices,
> this provides minimum code for the probing to not crash.
> 
> Because now we have to set iommu_ops to the system (bus_set_iommu() or
> iommu_device_register()), this requires the POWERNV PCI setup to happen
> after bus_register(&pci_bus_type) which is postcore_initcall
> TODO: check if it still works, read sha1, for more details:
> https://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git/commit/?id=5537fcb319d016ce387
> 
> Because setting the ops triggers probing, this does not work well with
> iommu_group_add_device(), hence the move to iommu_probe_device().
> 
> Because iommu_probe_device() does not take the group (which is why
> we had the helper in the first place), this adds
> pci_controller_ops::device_group.
> 
> So, basically there is one iommu_device per PHB and devices are added to
> groups indirectly via series of calls inside the IOMMU code.
> 
> pSeries is out of scope here (a minor fix needed for barely supported
> platform in regard to VFIO).
> 
> The previous discussion is here:
> https://patchwork.ozlabs.org/project/kvm-ppc/patch/20220701061751.1955857-1-aik@ozlabs.ru/

I think this is basically OK, for what it is. It looks like there is
more some-day opportunity to make use of the core infrastructure though.

> does it make sense to have this many callbacks, or
> the generic IOMMU code can safely operate without some
> (given I add some more checks for !NULL)? thanks,

I wouldn't worry about it..

> @@ -1156,7 +1158,10 @@ int iommu_add_device(struct iommu_table_group *table_group, struct device *dev)
>  	pr_debug("%s: Adding %s to iommu group %d\n",
>  		 __func__, dev_name(dev),  iommu_group_id(table_group->group));
>  
> -	return iommu_group_add_device(table_group->group, dev);
> +	ret = iommu_probe_device(dev);
> +	dev_info(dev, "probed with %d\n", ret);

For another day, but it seems a bit strange to call iommu_probe_device() like this?
Shouldn't one of the existing call sites cover this? The one in
of_iommu.c perhaps?

> +static bool spapr_tce_iommu_is_attach_deferred(struct device *dev)
> +{
> +       return false;
> +}

I think you can NULL this op:

static bool iommu_is_attach_deferred(struct device *dev)
{
	const struct iommu_ops *ops = dev_iommu_ops(dev);

	if (ops->is_attach_deferred)
		return ops->is_attach_deferred(dev);

	return false;
}

> +static struct iommu_group *spapr_tce_iommu_device_group(struct device *dev)
> +{
> +	struct pci_controller *hose;
> +	struct pci_dev *pdev;
> +
> +	/* Weirdly iommu_device_register() assigns the same ops to all buses */
> +	if (!dev_is_pci(dev))
> +		return ERR_PTR(-EPERM);
> +
> +	pdev = to_pci_dev(dev);
> +	hose = pdev->bus->sysdata;
> +
> +	if (!hose->controller_ops.device_group)
> +		return ERR_PTR(-ENOENT);
> +
> +	return hose->controller_ops.device_group(hose, pdev);
> +}

Is this missing a refcount get on the group?

> +
> +static int spapr_tce_iommu_attach_dev(struct iommu_domain *dom,
> +				      struct device *dev)
> +{
> +	return 0;
> +}

It is important when this returns that the iommu translation is all
emptied. There should be no left over translations from the DMA API at
this point. I have no idea how power works in this regard, but it
should be explained why this is safe in a comment at a minimum.

It will turn into a security problem to allow kernel mappings to leak
past this point.

Jason