linuxppc-dev.lists.ozlabs.org archive mirror
 help / color / mirror / Atom feed
From: Rohan McLure <rmclure@linux.ibm.com>
To: linuxppc-dev@lists.ozlabs.org
Cc: Rohan McLure <rmclure@linux.ibm.com>
Subject: [PATCH v3 12/18] Revert "powerpc/syscall: Save r3 in regs->orig_r3"
Date: Fri, 19 Aug 2022 13:38:00 +1000	[thread overview]
Message-ID: <20220819033806.162054-13-rmclure@linux.ibm.com> (raw)
In-Reply-To: <20220819033806.162054-1-rmclure@linux.ibm.com>

This reverts commit 8875f47b7681aa4e4484a9b612577b044725f839.

Save caller's original r3 state to the kernel stackframe before entering
system_call_exception. This allows for user registers to be cleared by
the time system_call_exception is entered, reducing the influence of
user registers on speculation within the kernel.

Prior to this commit, orig_r3 was saved at the beginning of
system_call_exception. Instead, save orig_r3 while the user value is
still live in r3.

Also replicate this early save in 32-bit. A similar save was removed in
6f76a01173cc
("powerpc/syscall: implement system call entry/exit logic in C for PPC32")
when 32-bit adopted system_call_exception. Revert its removal of orig_r3
saves.

Signed-off-by: Rohan McLure <rmclure@linux.ibm.com>
---
V2 -> V3: New commit.
---
 arch/powerpc/kernel/entry_32.S     | 1 +
 arch/powerpc/kernel/interrupt_64.S | 2 ++
 arch/powerpc/kernel/syscall.c      | 1 -
 3 files changed, 3 insertions(+), 1 deletion(-)

diff --git a/arch/powerpc/kernel/entry_32.S b/arch/powerpc/kernel/entry_32.S
index 1d599df6f169..44dfce9a60c5 100644
--- a/arch/powerpc/kernel/entry_32.S
+++ b/arch/powerpc/kernel/entry_32.S
@@ -101,6 +101,7 @@ __kuep_unlock:
 
 	.globl	transfer_to_syscall
 transfer_to_syscall:
+	stw	r3, ORIG_GPR3(r1)
 	stw	r11, GPR1(r1)
 	stw	r11, 0(r1)
 	mflr	r12
diff --git a/arch/powerpc/kernel/interrupt_64.S b/arch/powerpc/kernel/interrupt_64.S
index ce25b28cf418..71d2d9497283 100644
--- a/arch/powerpc/kernel/interrupt_64.S
+++ b/arch/powerpc/kernel/interrupt_64.S
@@ -91,6 +91,7 @@ _ASM_NOKPROBE_SYMBOL(system_call_vectored_\name)
 	li	r11,\trapnr
 	std	r11,_TRAP(r1)
 	std	r12,_CCR(r1)
+	std	r3,ORIG_GPR3(r1)
 	addi	r10,r1,STACK_FRAME_OVERHEAD
 	ld	r11,exception_marker@toc(r2)
 	std	r11,-16(r10)		/* "regshere" marker */
@@ -275,6 +276,7 @@ END_BTB_FLUSH_SECTION
 	std	r10,_LINK(r1)
 	std	r11,_TRAP(r1)
 	std	r12,_CCR(r1)
+	std	r3,ORIG_GPR3(r1)
 	addi	r10,r1,STACK_FRAME_OVERHEAD
 	ld	r11,exception_marker@toc(r2)
 	std	r11,-16(r10)		/* "regshere" marker */
diff --git a/arch/powerpc/kernel/syscall.c b/arch/powerpc/kernel/syscall.c
index 81ace9e8b72b..64102a64fd84 100644
--- a/arch/powerpc/kernel/syscall.c
+++ b/arch/powerpc/kernel/syscall.c
@@ -25,7 +25,6 @@ notrace long system_call_exception(long r3, long r4, long r5,
 	kuap_lock();
 
 	add_random_kstack_offset();
-	regs->orig_gpr3 = r3;
 
 	if (IS_ENABLED(CONFIG_PPC_IRQ_SOFT_MASK_DEBUG))
 		BUG_ON(irq_soft_mask_return() != IRQS_ALL_DISABLED);
-- 
2.34.1


  parent reply	other threads:[~2022-08-19  3:40 UTC|newest]

Thread overview: 27+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2022-08-19  3:37 [PATCH v3 00/18] powerpc: Syscall wrapper and register clearing Rohan McLure
2022-08-19  3:37 ` [PATCH v3 01/18] powerpc: Remove asmlinkage from syscall handler definitions Rohan McLure
2022-08-19  3:37 ` [PATCH v3 02/18] powerpc: Use generic fallocate compatibility syscall Rohan McLure
2022-08-19  3:37 ` [PATCH v3 03/18] powerpc/32: Remove powerpc select specialisation Rohan McLure
2022-08-19  3:37 ` [PATCH v3 04/18] powerpc: Provide do_ppc64_personality helper Rohan McLure
2022-08-19  3:37 ` [PATCH v3 05/18] powerpc: Adopt SYSCALL_DEFINE for arch-specific syscall handlers Rohan McLure
2022-08-19  6:41   ` Christophe Leroy
2022-08-19  3:37 ` [PATCH v3 06/18] powerpc: Remove direct call to personality syscall handler Rohan McLure
2022-08-19  3:37 ` [PATCH v3 07/18] powerpc: Remove direct call to mmap2 syscall handlers Rohan McLure
2022-08-19  6:41   ` Christophe Leroy
2022-08-19  3:37 ` [PATCH v3 08/18] powerpc: Include all arch-specific syscall prototypes Rohan McLure
2022-08-19  3:37 ` [PATCH v3 09/18] powerpc: Enable compile-time check for syscall handlers Rohan McLure
2022-08-19  3:37 ` [PATCH v3 10/18] powerpc: Use common syscall handler type Rohan McLure
2022-08-19  3:37 ` [PATCH v3 11/18] powerpc: Add ZEROIZE_GPRS macros for register clears Rohan McLure
2022-08-19  6:45   ` Christophe Leroy
2022-08-19  3:38 ` Rohan McLure [this message]
2022-08-19  3:38 ` [PATCH v3 13/18] powerpc: Provide syscall wrapper Rohan McLure
2022-08-19  3:38 ` [PATCH v3 14/18] powerpc/64s: Clear/restore caller gprs in syscall interrupt/return Rohan McLure
2022-08-19  6:52   ` Christophe Leroy
2022-08-22  3:47     ` Rohan McLure
2022-08-19  3:38 ` [PATCH v3 15/18] powerpc/64s: Use {ZEROIZE,SAVE,REST}_GPRS macros in sc, scv 0 handlers Rohan McLure
2022-08-19  3:38 ` [PATCH v3 16/18] powerpc/32: Clarify interrupt restores with REST_GPR macro in entry_32.S Rohan McLure
2022-08-19  6:29   ` Christophe Leroy
2022-08-19  3:38 ` [PATCH v3 17/18] powerpc/64s: Fix comment on interrupt handler prologue Rohan McLure
2022-08-19  3:38 ` [PATCH v3 18/18] powerpc/64s: Clear gprs on interrupt routine entry Rohan McLure
2022-08-19  7:41   ` Christophe Leroy
2022-08-24  1:24     ` Rohan McLure

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20220819033806.162054-13-rmclure@linux.ibm.com \
    --to=rmclure@linux.ibm.com \
    --cc=linuxppc-dev@lists.ozlabs.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).