[PATCH 1/3] powerpc/64s: Disable preemption in hash lazy mmu mode

[PATCH 1/3] powerpc/64s: Disable preemption in hash lazy mmu mode

[Nicholas Piggin]

apply_to_page_range on kernel pages does not disable preemption, which
is a requirement for hash's lazy mmu mode, which keeps track of the
TLBs to flush with a per-cpu array.

Reported-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
---
 arch/powerpc/include/asm/book3s/64/tlbflush-hash.h | 6 ++++++
 1 file changed, 6 insertions(+)

diff --git a/arch/powerpc/include/asm/book3s/64/tlbflush-hash.h b/arch/powerpc/include/asm/book3s/64/tlbflush-hash.h
index fab8332fe1ad..751921f6db46 100644
--- a/arch/powerpc/include/asm/book3s/64/tlbflush-hash.h
+++ b/arch/powerpc/include/asm/book3s/64/tlbflush-hash.h
@@ -32,6 +32,11 @@ static inline void arch_enter_lazy_mmu_mode(void)
 
 	if (radix_enabled())
 		return;
+	/*
+	 * apply_to_page_range can call us this preempt enabled when
+	 * operating on kernel page tables.
+	 */
+	preempt_disable();
 	batch = this_cpu_ptr(&ppc64_tlb_batch);
 	batch->active = 1;
 }
@@ -47,6 +52,7 @@ static inline void arch_leave_lazy_mmu_mode(void)
 	if (batch->index)
 		__flush_tlb_pending(batch);
 	batch->active = 0;
+	preempt_enable();
 }
 
 #define arch_flush_lazy_mmu_mode()      do {} while (0)
-- 
2.37.2

[PATCH 2/3] powerpc/64s: Fix hash__change_memory_range preemption warning

[Nicholas Piggin]

stop_machine_cpuslocked takes a mutex so it must be called in a
preemptible context, so it can't simply be fixed by disabling
preemption.

This is not a bug, because CPU hotplug is locked, so this processor will
call in to the stop machine function. So raw_smp_processor_id() could be
used. This leaves a small chance that this thread will be migrated to
another CPU, so the master work would be done by a CPU from a different
context. Better for test coverage to make that a common case by just
having the first CPU to call in become the master.

Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
---
 arch/powerpc/mm/book3s64/hash_pgtable.c | 8 +++++---
 1 file changed, 5 insertions(+), 3 deletions(-)

diff --git a/arch/powerpc/mm/book3s64/hash_pgtable.c b/arch/powerpc/mm/book3s64/hash_pgtable.c
index 747492edb75a..51f48984abca 100644
--- a/arch/powerpc/mm/book3s64/hash_pgtable.c
+++ b/arch/powerpc/mm/book3s64/hash_pgtable.c
@@ -404,7 +404,8 @@ EXPORT_SYMBOL_GPL(hash__has_transparent_hugepage);
 
 struct change_memory_parms {
 	unsigned long start, end, newpp;
-	unsigned int step, nr_cpus, master_cpu;
+	unsigned int step, nr_cpus;
+	atomic_t master_cpu;
 	atomic_t cpu_counter;
 };
 
@@ -478,7 +479,8 @@ static int change_memory_range_fn(void *data)
 {
 	struct change_memory_parms *parms = data;
 
-	if (parms->master_cpu != smp_processor_id())
+	// First CPU goes through, all others wait.
+	if (atomic_xchg(&parms->master_cpu, 1) == 1)
 		return chmem_secondary_loop(parms);
 
 	// Wait for all but one CPU (this one) to call-in
@@ -516,7 +518,7 @@ static bool hash__change_memory_range(unsigned long start, unsigned long end,
 		chmem_parms.end = end;
 		chmem_parms.step = step;
 		chmem_parms.newpp = newpp;
-		chmem_parms.master_cpu = smp_processor_id();
+		atomic_set(&chmem_parms.master_cpu, 0);
 
 		cpus_read_lock();
 
-- 
2.37.2

Re: [PATCH 2/3] powerpc/64s: Fix hash__change_memory_range preemption warning

[Guenter Roeck]

On Fri, Oct 14, 2022 at 01:16:46AM +1000, Nicholas Piggin wrote:
> stop_machine_cpuslocked takes a mutex so it must be called in a
> preemptible context, so it can't simply be fixed by disabling
> preemption.
> 
> This is not a bug, because CPU hotplug is locked, so this processor will
> call in to the stop machine function. So raw_smp_processor_id() could be
> used. This leaves a small chance that this thread will be migrated to
> another CPU, so the master work would be done by a CPU from a different
> context. Better for test coverage to make that a common case by just
> having the first CPU to call in become the master.
> 
> Signed-off-by: Nicholas Piggin <npiggin@gmail.com>

Tested-by: Guenter Roeck <linux@roeck-us.net>

> ---
>  arch/powerpc/mm/book3s64/hash_pgtable.c | 8 +++++---
>  1 file changed, 5 insertions(+), 3 deletions(-)
> 
> diff --git a/arch/powerpc/mm/book3s64/hash_pgtable.c b/arch/powerpc/mm/book3s64/hash_pgtable.c
> index 747492edb75a..51f48984abca 100644
> --- a/arch/powerpc/mm/book3s64/hash_pgtable.c
> +++ b/arch/powerpc/mm/book3s64/hash_pgtable.c
> @@ -404,7 +404,8 @@ EXPORT_SYMBOL_GPL(hash__has_transparent_hugepage);
>  
>  struct change_memory_parms {
>  	unsigned long start, end, newpp;
> -	unsigned int step, nr_cpus, master_cpu;
> +	unsigned int step, nr_cpus;
> +	atomic_t master_cpu;
>  	atomic_t cpu_counter;
>  };
>  
> @@ -478,7 +479,8 @@ static int change_memory_range_fn(void *data)
>  {
>  	struct change_memory_parms *parms = data;
>  
> -	if (parms->master_cpu != smp_processor_id())
> +	// First CPU goes through, all others wait.
> +	if (atomic_xchg(&parms->master_cpu, 1) == 1)
>  		return chmem_secondary_loop(parms);
>  
>  	// Wait for all but one CPU (this one) to call-in
> @@ -516,7 +518,7 @@ static bool hash__change_memory_range(unsigned long start, unsigned long end,
>  		chmem_parms.end = end;
>  		chmem_parms.step = step;
>  		chmem_parms.newpp = newpp;
> -		chmem_parms.master_cpu = smp_processor_id();
> +		atomic_set(&chmem_parms.master_cpu, 0);
>  
>  		cpus_read_lock();
>  
> -- 
> 2.37.2
> 

[PATCH 3/3] powerpc: fix reschedule bug in KUAP-unlocked user copy

[Nicholas Piggin]

schedule must not be explicitly called while KUAP is unlocked, because
the AMR register will not be saved across the context switch on 64s
(preemption is allowed because that is driven by interrupts which do
save the AMR).

exit_vmx_usercopy() runs inside an unlocked user access region, and it
calls preempt_enable() which will call schedule() if need_resched() was
set while non-preemptible. This can cause tasks to run unprotected when
the should not, and can cause the user copy to be improperly blocked
when scheduling back to it.

Fix this by avoiding the explicit resched for preempt kernels by
generating an interrupt to reschedule the context if need_resched() got
set.

Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
---
 arch/powerpc/lib/vmx-helper.c | 12 +++++++++++-
 1 file changed, 11 insertions(+), 1 deletion(-)

diff --git a/arch/powerpc/lib/vmx-helper.c b/arch/powerpc/lib/vmx-helper.c
index f76a50291fd7..d491da8d1838 100644
--- a/arch/powerpc/lib/vmx-helper.c
+++ b/arch/powerpc/lib/vmx-helper.c
@@ -36,7 +36,17 @@ int exit_vmx_usercopy(void)
 {
 	disable_kernel_altivec();
 	pagefault_enable();
-	preempt_enable();
+	preempt_enable_no_resched();
+	/*
+	 * Must never explicitly call schedule (including preempt_enable())
+	 * while in a kuap-unlocked user copy, because the AMR register will
+	 * not be saved and restored across context switch. However preempt
+	 * kernels need to be preempted as soon as possible if need_resched is
+	 * set and we are preemptible. The hack here is to schedule a
+	 * decrementer to fire here and reschedule for us if necessary.
+	 */
+	if (IS_ENABLED(CONFIG_PREEMPT) && need_resched())
+		set_dec(1);
 	return 0;
 }
 
-- 
2.37.2

Re: [PATCH 3/3] powerpc: fix reschedule bug in KUAP-unlocked user copy

[Guenter Roeck]

On Fri, Oct 14, 2022 at 01:16:47AM +1000, Nicholas Piggin wrote:
> schedule must not be explicitly called while KUAP is unlocked, because
> the AMR register will not be saved across the context switch on 64s
> (preemption is allowed because that is driven by interrupts which do
> save the AMR).
> 
> exit_vmx_usercopy() runs inside an unlocked user access region, and it
> calls preempt_enable() which will call schedule() if need_resched() was
> set while non-preemptible. This can cause tasks to run unprotected when
> the should not, and can cause the user copy to be improperly blocked
> when scheduling back to it.
> 
> Fix this by avoiding the explicit resched for preempt kernels by
> generating an interrupt to reschedule the context if need_resched() got
> set.
> 
> Signed-off-by: Nicholas Piggin <npiggin@gmail.com>

With:

0cbbc95b12ac (HEAD -> ppc) powerpc: fix reschedule bug in KUAP-unlocked user copy
28f6b1f174f4 powerpc/64s: Fix hash__change_memory_range preemption warning
20cbdcbb2b09 powerpc/64s: Disable preemption in hash lazy mmu mode
a8b305a95113 powerpc/pseries: Fix CONFIG_DTL=n build
9c55696dd278 powerpc/64s/interrupt: Fix lost interrupts when returning to soft-masked context
f2b220ef93ea (local/master, master) Merge tag 'docs-6.1-2' of git://git.lwn.net/linux

I observed the traceback below. This is with KFENCE and various module
tests (re-)enabled, so the problem may well be unrelated to any of the
above patches.

Guenter

---
WARNING: inconsistent lock state
6.0.0-11845-g0cbbc95b12ac #1 Tainted: G                 N
--------------------------------
inconsistent {IN-SOFTIRQ-W} -> {SOFTIRQ-ON-W} usage.
swapper/0/1 [HC0[0]:SC0[0]:HE1:SE1] takes:
c000000002734de8 (native_tlbie_lock){+.?.}-{2:2}, at: .native_hpte_updateboltedpp+0x1a4/0x600
{IN-SOFTIRQ-W} state was registered at:
  .lock_acquire+0x20c/0x520
  ._raw_spin_lock+0x4c/0x70
  .native_hpte_invalidate+0x62c/0x840
  .hash__kernel_map_pages+0x450/0x640
  .kfence_protect+0x58/0xc0
  .kfence_guarded_free+0x374/0x5a0
  .__slab_free+0x3d0/0x630
  .put_cred_rcu+0xcc/0x120
  .rcu_core+0x3c4/0x14e0
  .__do_softirq+0x1dc/0x7dc
  .do_softirq_own_stack+0x40/0x60
  0xc00000000869f6d0
  .irq_exit+0x1e8/0x220
  .timer_interrupt+0x284/0x700
  decrementer_common_virt+0x214/0x220
  .rwsem_wake+0x88/0xe0
  .crypto_alg_tested+0x26c/0x370
  .cryptomgr_test+0x34/0x70
  .kthread+0x154/0x180
  .ret_from_kernel_thread+0x58/0x60
irq event stamp: 162973
hardirqs last  enabled at (162973): [<c0000000010cb724>] ._raw_spin_unlock_irqrestore+0xa4/0x120
hardirqs last disabled at (162972): [<c0000000010cb2e0>] ._raw_spin_lock_irqsave+0x40/0xa0
softirqs last  enabled at (162280): [<c0000000010cea2c>] .__do_softirq+0x7ac/0x7dc
softirqs last disabled at (162271): [<c000000000014a60>] .do_softirq_own_stack+0x40/0x60

other info that might help us debug this:
 Possible unsafe locking scenario:

       CPU0
       ----
  lock(native_tlbie_lock);
  <Interrupt>
    lock(native_tlbie_lock);

 *** DEADLOCK ***

no locks held by swapper/0/1.

stack backtrace:
CPU: 0 PID: 1 Comm: swapper/0 Tainted: G                 N 6.0.0-11845-g0cbbc95b12ac #1
Hardware name: PowerMac3,1 PPC970FX 0x3c0301 PowerMac
Call Trace:
[c000000005607520] [c0000000010853a8] .dump_stack_lvl+0xa4/0x100 (unreliable)
[c0000000056075b0] [c00000000017e34c] .print_usage_bug+0x2dc/0x310
[c000000005607690] [c00000000017ec8c] .mark_lock.part.42+0x90c/0x9d0
[c0000000056077c0] [c00000000018071c] .__lock_acquire+0x58c/0x2070
[c000000005607910] [c00000000017f3bc] .lock_acquire+0x20c/0x520
[c000000005607a20] [c0000000010cb05c] ._raw_spin_lock+0x4c/0x70
[c000000005607ab0] [c00000000007af94] .native_hpte_updateboltedpp+0x1a4/0x600
[c000000005607b70] [c0000000000721cc] .hash__change_memory_range+0xec/0x200
[c000000005607c20] [c000000000072904] .hash__mark_initmem_nx+0x54/0x90
[c000000005607ca0] [c00000000006e490] .mark_initmem_nx+0x30/0x70
[c000000005607d10] [c00000000006d440] .free_initmem+0x30/0xf0
[c000000005607d90] [c0000000000116ec] .kernel_init+0x5c/0x1c0
[c000000005607e10] [c00000000000ca3c] .ret_from_kernel_thread+0x58/0x60

Re: [PATCH 3/3] powerpc: fix reschedule bug in KUAP-unlocked user copy

[Guenter Roeck]

On Fri, Oct 14, 2022 at 01:16:47AM +1000, Nicholas Piggin wrote:
> schedule must not be explicitly called while KUAP is unlocked, because
> the AMR register will not be saved across the context switch on 64s
> (preemption is allowed because that is driven by interrupts which do
> save the AMR).
> 
> exit_vmx_usercopy() runs inside an unlocked user access region, and it
> calls preempt_enable() which will call schedule() if need_resched() was
> set while non-preemptible. This can cause tasks to run unprotected when
> the should not, and can cause the user copy to be improperly blocked
> when scheduling back to it.
> 
> Fix this by avoiding the explicit resched for preempt kernels by
> generating an interrupt to reschedule the context if need_resched() got
> set.
> 
> Signed-off-by: Nicholas Piggin <npiggin@gmail.com>

Tested-by: Guenter Roeck <linux@roeck-us.net>

> ---
>  arch/powerpc/lib/vmx-helper.c | 12 +++++++++++-
>  1 file changed, 11 insertions(+), 1 deletion(-)
> 
> diff --git a/arch/powerpc/lib/vmx-helper.c b/arch/powerpc/lib/vmx-helper.c
> index f76a50291fd7..d491da8d1838 100644
> --- a/arch/powerpc/lib/vmx-helper.c
> +++ b/arch/powerpc/lib/vmx-helper.c
> @@ -36,7 +36,17 @@ int exit_vmx_usercopy(void)
>  {
>  	disable_kernel_altivec();
>  	pagefault_enable();
> -	preempt_enable();
> +	preempt_enable_no_resched();
> +	/*
> +	 * Must never explicitly call schedule (including preempt_enable())
> +	 * while in a kuap-unlocked user copy, because the AMR register will
> +	 * not be saved and restored across context switch. However preempt
> +	 * kernels need to be preempted as soon as possible if need_resched is
> +	 * set and we are preemptible. The hack here is to schedule a
> +	 * decrementer to fire here and reschedule for us if necessary.
> +	 */
> +	if (IS_ENABLED(CONFIG_PREEMPT) && need_resched())
> +		set_dec(1);
>  	return 0;
>  }
>  
> -- 
> 2.37.2
> 

Re: [PATCH 1/3] powerpc/64s: Disable preemption in hash lazy mmu mode

[Christophe Leroy]

Le 13/10/2022 à 17:16, Nicholas Piggin a écrit :
> apply_to_page_range on kernel pages does not disable preemption, which
> is a requirement for hash's lazy mmu mode, which keeps track of the
> TLBs to flush with a per-cpu array.
> 
> Reported-by: Guenter Roeck <linux@roeck-us.net>
> Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
> ---
>   arch/powerpc/include/asm/book3s/64/tlbflush-hash.h | 6 ++++++
>   1 file changed, 6 insertions(+)
> 
> diff --git a/arch/powerpc/include/asm/book3s/64/tlbflush-hash.h b/arch/powerpc/include/asm/book3s/64/tlbflush-hash.h
> index fab8332fe1ad..751921f6db46 100644
> --- a/arch/powerpc/include/asm/book3s/64/tlbflush-hash.h
> +++ b/arch/powerpc/include/asm/book3s/64/tlbflush-hash.h
> @@ -32,6 +32,11 @@ static inline void arch_enter_lazy_mmu_mode(void)
>   
>   	if (radix_enabled())
>   		return;
> +	/*
> +	 * apply_to_page_range can call us this preempt enabled when
> +	 * operating on kernel page tables.
> +	 */
> +	preempt_disable();
>   	batch = this_cpu_ptr(&ppc64_tlb_batch);
>   	batch->active = 1;
>   }
> @@ -47,6 +52,7 @@ static inline void arch_leave_lazy_mmu_mode(void)
>   	if (batch->index)
>   		__flush_tlb_pending(batch);
>   	batch->active = 0;
> +	preempt_enable();

You'll schedule() here. Is that acceptable in terms of performance ? 
Otherwise you have preempt_enable_no_resched()

>   }
>   
>   #define arch_flush_lazy_mmu_mode()      do {} while (0)

Re: [PATCH 1/3] powerpc/64s: Disable preemption in hash lazy mmu mode

[Guenter Roeck]

On Fri, Oct 14, 2022 at 01:16:45AM +1000, Nicholas Piggin wrote:
> apply_to_page_range on kernel pages does not disable preemption, which
> is a requirement for hash's lazy mmu mode, which keeps track of the
> TLBs to flush with a per-cpu array.
> 
> Reported-by: Guenter Roeck <linux@roeck-us.net>
> Signed-off-by: Nicholas Piggin <npiggin@gmail.com>

Tested-by: Guenter Roeck <linux@roeck-us.net>

> ---
>  arch/powerpc/include/asm/book3s/64/tlbflush-hash.h | 6 ++++++
>  1 file changed, 6 insertions(+)
> 
> diff --git a/arch/powerpc/include/asm/book3s/64/tlbflush-hash.h b/arch/powerpc/include/asm/book3s/64/tlbflush-hash.h
> index fab8332fe1ad..751921f6db46 100644
> --- a/arch/powerpc/include/asm/book3s/64/tlbflush-hash.h
> +++ b/arch/powerpc/include/asm/book3s/64/tlbflush-hash.h
> @@ -32,6 +32,11 @@ static inline void arch_enter_lazy_mmu_mode(void)
>  
>  	if (radix_enabled())
>  		return;
> +	/*
> +	 * apply_to_page_range can call us this preempt enabled when
> +	 * operating on kernel page tables.
> +	 */
> +	preempt_disable();
>  	batch = this_cpu_ptr(&ppc64_tlb_batch);
>  	batch->active = 1;
>  }
> @@ -47,6 +52,7 @@ static inline void arch_leave_lazy_mmu_mode(void)
>  	if (batch->index)
>  		__flush_tlb_pending(batch);
>  	batch->active = 0;
> +	preempt_enable();
>  }
>  
>  #define arch_flush_lazy_mmu_mode()      do {} while (0)
> -- 
> 2.37.2
> 

Re: [PATCH 1/3] powerpc/64s: Disable preemption in hash lazy mmu mode

[Michael Ellerman]

On Fri, 14 Oct 2022 01:16:45 +1000, Nicholas Piggin wrote:
> apply_to_page_range on kernel pages does not disable preemption, which
> is a requirement for hash's lazy mmu mode, which keeps track of the
> TLBs to flush with a per-cpu array.
> 
> 

Applied to powerpc/fixes.

[1/3] powerpc/64s: Disable preemption in hash lazy mmu mode
      https://git.kernel.org/powerpc/c/b9ef323ea1682f9837bf63ba10c5e3750f71a20a
[2/3] powerpc/64s: Fix hash__change_memory_range preemption warning
      https://git.kernel.org/powerpc/c/2b2095f3a6b43ec36ff890febc588df1ec32e826
[3/3] powerpc: fix reschedule bug in KUAP-unlocked user copy
      https://git.kernel.org/powerpc/c/00ff1eaac129a24516a3f6d75adfb9df1efb55dd

cheers