From: Nicholas Piggin <npiggin@gmail.com>
To: linuxppc-dev@lists.ozlabs.org
Cc: Jordan Niethe <jniethe5@gmail.com>,
Laurent Dufour <ldufour@linux.ibm.com>,
Nicholas Piggin <npiggin@gmail.com>
Subject: [PATCH v3 13/17] powerpc/qspinlock: use spin_begin/end API
Date: Sat, 26 Nov 2022 19:59:28 +1000 [thread overview]
Message-ID: <20221126095932.1234527-14-npiggin@gmail.com> (raw)
In-Reply-To: <20221126095932.1234527-1-npiggin@gmail.com>
Use the spin_begin/spin_cpu_relax/spin_end APIs in qspinlock, which helps
to prevent threads issuing a lot of expensive priority nops which may not
have much effect due to immediately executing low then medium priority.
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
---
arch/powerpc/lib/qspinlock.c | 39 ++++++++++++++++++++++++++++++++----
1 file changed, 35 insertions(+), 4 deletions(-)
diff --git a/arch/powerpc/lib/qspinlock.c b/arch/powerpc/lib/qspinlock.c
index 1cb47a6478a0..70f924296b36 100644
--- a/arch/powerpc/lib/qspinlock.c
+++ b/arch/powerpc/lib/qspinlock.c
@@ -184,6 +184,7 @@ static struct qnode *get_tail_qnode(struct qspinlock *lock, u32 val)
BUG();
}
+/* Called inside spin_begin() */
static __always_inline void __yield_to_locked_owner(struct qspinlock *lock, u32 val, bool paravirt, bool mustq)
{
int owner;
@@ -203,6 +204,8 @@ static __always_inline void __yield_to_locked_owner(struct qspinlock *lock, u32
if ((yield_count & 1) == 0)
goto relax; /* owner vcpu is running */
+ spin_end();
+
/*
* Read the lock word after sampling the yield count. On the other side
* there may a wmb because the yield count update is done by the
@@ -218,18 +221,22 @@ static __always_inline void __yield_to_locked_owner(struct qspinlock *lock, u32
yield_to_preempted(owner, yield_count);
if (mustq)
set_mustq(lock);
+ spin_begin();
/* Don't relax if we yielded. Maybe we should? */
return;
}
+ spin_begin();
relax:
- cpu_relax();
+ spin_cpu_relax();
}
+/* Called inside spin_begin() */
static __always_inline void yield_to_locked_owner(struct qspinlock *lock, u32 val, bool paravirt)
{
__yield_to_locked_owner(lock, val, paravirt, false);
}
+/* Called inside spin_begin() */
static __always_inline void yield_head_to_locked_owner(struct qspinlock *lock, u32 val, bool paravirt)
{
bool mustq = false;
@@ -267,6 +274,7 @@ static __always_inline void propagate_yield_cpu(struct qnode *node, u32 val, int
}
}
+/* Called inside spin_begin() */
static __always_inline void yield_to_prev(struct qspinlock *lock, struct qnode *node, u32 val, bool paravirt)
{
int prev_cpu = decode_tail_cpu(val);
@@ -291,14 +299,18 @@ static __always_inline void yield_to_prev(struct qspinlock *lock, struct qnode *
if ((yield_count & 1) == 0)
goto yield_prev; /* owner vcpu is running */
+ spin_end();
+
smp_rmb();
if (yield_cpu == node->yield_cpu) {
if (node->next && node->next->yield_cpu != yield_cpu)
node->next->yield_cpu = yield_cpu;
yield_to_preempted(yield_cpu, yield_count);
+ spin_begin();
return;
}
+ spin_begin();
yield_prev:
if (!pv_yield_prev)
@@ -308,15 +320,19 @@ static __always_inline void yield_to_prev(struct qspinlock *lock, struct qnode *
if ((yield_count & 1) == 0)
goto relax; /* owner vcpu is running */
+ spin_end();
+
smp_rmb(); /* See __yield_to_locked_owner comment */
if (!node->locked) {
yield_to_preempted(prev_cpu, yield_count);
+ spin_begin();
return;
}
+ spin_begin();
relax:
- cpu_relax();
+ spin_cpu_relax();
}
@@ -328,6 +344,8 @@ static __always_inline bool try_to_steal_lock(struct qspinlock *lock, bool parav
return false;
/* Attempt to steal the lock */
+ spin_begin();
+
do {
u32 val = READ_ONCE(lock->val);
@@ -335,8 +353,10 @@ static __always_inline bool try_to_steal_lock(struct qspinlock *lock, bool parav
break;
if (unlikely(!(val & _Q_LOCKED_VAL))) {
+ spin_end();
if (__queued_spin_trylock_steal(lock))
return true;
+ spin_begin();
} else {
yield_to_locked_owner(lock, val, paravirt);
}
@@ -344,6 +364,8 @@ static __always_inline bool try_to_steal_lock(struct qspinlock *lock, bool parav
iters++;
} while (iters < get_steal_spins(paravirt));
+ spin_end();
+
return false;
}
@@ -395,8 +417,10 @@ static __always_inline void queued_spin_lock_mcs_queue(struct qspinlock *lock, b
WRITE_ONCE(prev->next, node);
/* Wait for mcs node lock to be released */
+ spin_begin();
while (!node->locked)
yield_to_prev(lock, node, old, paravirt);
+ spin_end();
/* Clear out stale propagated yield_cpu */
if (paravirt && pv_yield_propagate_owner && node->yield_cpu != -1)
@@ -407,6 +431,7 @@ static __always_inline void queued_spin_lock_mcs_queue(struct qspinlock *lock, b
again:
/* We're at the head of the waitqueue, wait for the lock. */
+ spin_begin();
for (;;) {
val = READ_ONCE(lock->val);
if (!(val & _Q_LOCKED_VAL))
@@ -424,6 +449,7 @@ static __always_inline void queued_spin_lock_mcs_queue(struct qspinlock *lock, b
val |= _Q_MUST_Q_VAL;
}
}
+ spin_end();
/* If we're the last queued, must clean up the tail. */
old = trylock_clean_tail(lock, tail);
@@ -436,8 +462,13 @@ static __always_inline void queued_spin_lock_mcs_queue(struct qspinlock *lock, b
goto release; /* We were the tail, no next. */
/* There is a next, must wait for node->next != NULL (MCS protocol) */
- while (!(next = READ_ONCE(node->next)))
- cpu_relax();
+ next = READ_ONCE(node->next);
+ if (!next) {
+ spin_begin();
+ while (!(next = READ_ONCE(node->next)))
+ cpu_relax();
+ spin_end();
+ }
/*
* Unlock the next mcs waiter node. Release barrier is not required
--
2.37.2
next prev parent reply other threads:[~2022-11-26 10:12 UTC|newest]
Thread overview: 21+ messages / expand[flat|nested] mbox.gz Atom feed top
2022-11-26 9:59 [PATCH v3 00/17] powerpc: alternate queued spinlock implementation Nicholas Piggin
2022-11-26 9:59 ` [PATCH v3 01/17] powerpc/qspinlock: add mcs queueing for contended waiters Nicholas Piggin
2022-11-26 9:59 ` [PATCH v3 02/17] powerpc/qspinlock: use a half-word store to unlock to avoid larx/stcx Nicholas Piggin
2022-11-26 9:59 ` [PATCH v3 03/17] powerpc/qspinlock: convert atomic operations to assembly Nicholas Piggin
2022-11-26 9:59 ` [PATCH v3 04/17] powerpc/qspinlock: allow new waiters to steal the lock before queueing Nicholas Piggin
2022-11-26 9:59 ` [PATCH v3 05/17] powerpc/qspinlock: theft prevention to control latency Nicholas Piggin
2022-11-26 9:59 ` [PATCH v3 06/17] powerpc/qspinlock: store owner CPU in lock word Nicholas Piggin
2022-11-26 9:59 ` [PATCH v3 07/17] powerpc/qspinlock: paravirt yield to lock owner Nicholas Piggin
2022-11-26 9:59 ` [PATCH v3 08/17] powerpc/qspinlock: implement option to yield to previous node Nicholas Piggin
2022-11-26 9:59 ` [PATCH v3 09/17] powerpc/qspinlock: allow stealing when head of queue yields Nicholas Piggin
2022-11-26 9:59 ` [PATCH v3 10/17] powerpc/qspinlock: allow propagation of yield CPU down the queue Nicholas Piggin
2022-11-26 9:59 ` [PATCH v3 11/17] powerpc/qspinlock: add ability to prod new queue head CPU Nicholas Piggin
2022-11-26 9:59 ` [PATCH v3 12/17] powerpc/qspinlock: allow lock stealing in trylock and lock fastpath Nicholas Piggin
2022-11-26 9:59 ` Nicholas Piggin [this message]
2022-11-26 9:59 ` [PATCH v3 14/17] powerpc/qspinlock: reduce remote node steal spins Nicholas Piggin
2022-11-26 9:59 ` [PATCH v3 15/17] powerpc/qspinlock: allow indefinite spinning on a preempted owner Nicholas Piggin
2022-11-26 9:59 ` [PATCH v3 16/17] powerpc/qspinlock: provide accounting and options for sleepy locks Nicholas Piggin
2022-11-26 9:59 ` [PATCH v3 17/17] powerpc/qspinlock: add compile-time tuning adjustments Nicholas Piggin
2022-11-28 3:11 ` [PATCH v3 real 01/17] powerpc/qspinlock: powerpc qspinlock implementation Nicholas Piggin
2022-12-08 12:39 ` (subset) [PATCH v3 00/17] powerpc: alternate queued spinlock implementation Michael Ellerman
2023-04-13 10:58 ` Shrikanth Hegde
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20221126095932.1234527-14-npiggin@gmail.com \
--to=npiggin@gmail.com \
--cc=jniethe5@gmail.com \
--cc=ldufour@linux.ibm.com \
--cc=linuxppc-dev@lists.ozlabs.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).