From: Rohan McLure <rmclure@linux.ibm.com>
To: linuxppc-dev@lists.ozlabs.org
Cc: Rohan McLure <rmclure@linux.ibm.com>, npiggin@gmail.com
Subject: [PATCH v5 3/7] powerpc/64: Sanitise common exit code for interrupts
Date: Thu, 1 Dec 2022 18:10:15 +1100 [thread overview]
Message-ID: <20221201071019.1953023-3-rmclure@linux.ibm.com> (raw)
In-Reply-To: <20221201071019.1953023-1-rmclure@linux.ibm.com>
Interrupt code is shared between Book3E/S 64-bit systems for interrupt
handlers. Ensure that exit code correctly restores non-volatile gprs on
each system when CONFIG_INTERRUPT_SANITIZE_REGISTERS is enabled.
Also introduce macros for clearing/restoring registers on interrupt
entry for when this configuration option is either disabled or enabled.
Reviewed-by: Nicholas Piggin <npiggin@gmail.com>
Signed-off-by: Rohan McLure <rmclure@linux.ibm.com>
---
v4: New patch
---
arch/powerpc/kernel/interrupt_64.S | 6 ++++++
1 file changed, 6 insertions(+)
diff --git a/arch/powerpc/kernel/interrupt_64.S b/arch/powerpc/kernel/interrupt_64.S
index 978a173eb339..1ef4fdef74fb 100644
--- a/arch/powerpc/kernel/interrupt_64.S
+++ b/arch/powerpc/kernel/interrupt_64.S
@@ -408,9 +408,11 @@ interrupt_return_\srr\()_user: /* make backtraces match the _kernel variant */
_ASM_NOKPROBE_SYMBOL(interrupt_return_\srr\()_user)
addi r3,r1,STACK_FRAME_OVERHEAD
bl interrupt_exit_user_prepare
+#ifndef CONFIG_INTERRUPT_SANITIZE_REGISTERS
cmpdi r3,0
bne- .Lrestore_nvgprs_\srr
.Lrestore_nvgprs_\srr\()_cont:
+#endif
std r1,PACA_EXIT_SAVE_R1(r13) /* save r1 for restart */
#ifdef CONFIG_PPC_BOOK3S
.Linterrupt_return_\srr\()_user_rst_start:
@@ -424,6 +426,7 @@ _ASM_NOKPROBE_SYMBOL(interrupt_return_\srr\()_user)
stb r11,PACAIRQHAPPENED(r13) # clear out possible HARD_DIS
.Lfast_user_interrupt_return_\srr\():
+ SANITIZE_RESTORE_NVGPRS()
#ifdef CONFIG_PPC_BOOK3S
.ifc \srr,srr
lbz r4,PACASRR_VALID(r13)
@@ -493,9 +496,11 @@ ALT_FTR_SECTION_END_IFCLR(CPU_FTR_STCX_CHECKS_ADDRESS)
b . /* prevent speculative execution */
.Linterrupt_return_\srr\()_user_rst_end:
+#ifndef CONFIG_INTERRUPT_SANITIZE_REGISTERS
.Lrestore_nvgprs_\srr\():
REST_NVGPRS(r1)
b .Lrestore_nvgprs_\srr\()_cont
+#endif
#ifdef CONFIG_PPC_BOOK3S
interrupt_return_\srr\()_user_restart:
@@ -576,6 +581,7 @@ _ASM_NOKPROBE_SYMBOL(interrupt_return_\srr\()_kernel)
stb r11,PACAIRQHAPPENED(r13) // clear the possible HARD_DIS
.Lfast_kernel_interrupt_return_\srr\():
+ SANITIZE_RESTORE_NVGPRS()
cmpdi cr1,r3,0
#ifdef CONFIG_PPC_BOOK3S
.ifc \srr,srr
--
2.37.2
next prev parent reply other threads:[~2022-12-01 7:11 UTC|newest]
Thread overview: 8+ messages / expand[flat|nested] mbox.gz Atom feed top
2022-12-01 7:10 [PATCH v5 1/7] powerpc/64: Add INTERRUPT_SANITIZE_REGISTERS Kconfig Rohan McLure
2022-12-01 7:10 ` [PATCH v5 2/7] powerpc/64: Add interrupt register sanitisation macros Rohan McLure
2022-12-01 7:10 ` Rohan McLure [this message]
2022-12-01 7:10 ` [PATCH v5 4/7] powerpc/64s: IOption for MSR stored in r12 Rohan McLure
2022-12-01 7:10 ` [PATCH v5 5/7] powerpc/64s: Zeroise gprs on interrupt routine entry on Book3S Rohan McLure
2022-12-01 7:10 ` [PATCH v5 6/7] powerpc/64e: Clear gprs on interrupt routine entry on Book3E Rohan McLure
2022-12-01 7:10 ` [PATCH v5 7/7] powerpc/64: Sanitise user registers on interrupt in pseries, POWERNV Rohan McLure
2022-12-08 12:40 ` [PATCH v5 1/7] powerpc/64: Add INTERRUPT_SANITIZE_REGISTERS Kconfig Michael Ellerman
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20221201071019.1953023-3-rmclure@linux.ibm.com \
--to=rmclure@linux.ibm.com \
--cc=linuxppc-dev@lists.ozlabs.org \
--cc=npiggin@gmail.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).