From: Nicholas Piggin <npiggin@gmail.com>
To: kvm@vger.kernel.org
Cc: Laurent Vivier <lvivier@redhat.com>,
Thomas Huth <thuth@redhat.com>,
linuxppc-dev@lists.ozlabs.org,
Nicholas Piggin <npiggin@gmail.com>
Subject: [kvm-unit-tests v3 13/13] powerpc/sprs: Test hypervisor registers on powernv machine
Date: Mon, 27 Mar 2023 22:45:20 +1000 [thread overview]
Message-ID: <20230327124520.2707537-14-npiggin@gmail.com> (raw)
In-Reply-To: <20230327124520.2707537-1-npiggin@gmail.com>
This enables HV privilege registers to be tested with the powernv
machine.
Acked-by: Thomas Huth <thuth@redhat.com>
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
---
powerpc/sprs.c | 33 +++++++++++++++++++++++++--------
1 file changed, 25 insertions(+), 8 deletions(-)
diff --git a/powerpc/sprs.c b/powerpc/sprs.c
index d566420..07a4e75 100644
--- a/powerpc/sprs.c
+++ b/powerpc/sprs.c
@@ -199,16 +199,16 @@ static const struct spr sprs_power_common[1024] = {
[190] = {"HFSCR", 64, HV_RW, },
[256] = {"VRSAVE", 32, RW, },
[259] = {"SPRG3", 64, RO, },
-[284] = {"TBL", 32, HV_WO, },
-[285] = {"TBU", 32, HV_WO, },
-[286] = {"TBU40", 64, HV_WO, },
+[284] = {"TBL", 32, HV_WO, }, /* Things can go a bit wonky with */
+[285] = {"TBU", 32, HV_WO, }, /* Timebase changing. Should save */
+[286] = {"TBU40", 64, HV_WO, }, /* and restore it. */
[304] = {"HSPRG0", 64, HV_RW, },
[305] = {"HSPRG1", 64, HV_RW, },
[306] = {"HDSISR", 32, HV_RW, SPR_INT, },
[307] = {"HDAR", 64, HV_RW, SPR_INT, },
[308] = {"SPURR", 64, HV_RW | OS_RO, SPR_ASYNC, },
[309] = {"PURR", 64, HV_RW | OS_RO, SPR_ASYNC, },
-[313] = {"HRMOR", 64, HV_RW, },
+[313] = {"HRMOR", 64, HV_RW, SPR_HARNESS, }, /* Harness can't cope with HRMOR changing */
[314] = {"HSRR0", 64, HV_RW, SPR_INT, },
[315] = {"HSRR1", 64, HV_RW, SPR_INT, },
[318] = {"LPCR", 64, HV_RW, },
@@ -306,7 +306,7 @@ static const struct spr sprs_power9_10[1024] = {
[921] = {"TSCR", 32, HV_RW, },
[922] = {"TTR", 64, HV_RW, },
[1006]= {"TRACE", 64, WO, },
-[1008]= {"HID", 64, HV_RW, },
+[1008]= {"HID", 64, HV_RW, SPR_HARNESS, }, /* At least HILE would be unhelpful to change */
};
/* This covers POWER8 and POWER9 PMUs */
@@ -350,6 +350,22 @@ static const struct spr sprs_power10_pmu[1024] = {
static struct spr sprs[1024];
+static bool spr_read_perms(int spr)
+{
+ if (machine_is_powernv())
+ return !!(sprs[spr].access & SPR_HV_READ);
+ else
+ return !!(sprs[spr].access & SPR_OS_READ);
+}
+
+static bool spr_write_perms(int spr)
+{
+ if (machine_is_powernv())
+ return !!(sprs[spr].access & SPR_HV_WRITE);
+ else
+ return !!(sprs[spr].access & SPR_OS_WRITE);
+}
+
static void setup_sprs(void)
{
uint32_t pvr = mfspr(287); /* Processor Version Register */
@@ -466,7 +482,7 @@ static void get_sprs(uint64_t *v)
int i;
for (i = 0; i < 1024; i++) {
- if (!(sprs[i].access & SPR_OS_READ))
+ if (!spr_read_perms(i))
continue;
v[i] = __mfspr(i);
}
@@ -477,8 +493,9 @@ static void set_sprs(uint64_t val)
int i;
for (i = 0; i < 1024; i++) {
- if (!(sprs[i].access & SPR_OS_WRITE))
+ if (!spr_write_perms(i))
continue;
+
if (sprs[i].type & SPR_HARNESS)
continue;
if (!strcmp(sprs[i].name, "MMCR0")) {
@@ -550,7 +567,7 @@ int main(int argc, char **argv)
for (i = 0; i < 1024; i++) {
bool pass = true;
- if (!(sprs[i].access & SPR_OS_READ))
+ if (!spr_read_perms(i))
continue;
if (sprs[i].width == 32) {
--
2.37.2
next prev parent reply other threads:[~2023-03-27 12:58 UTC|newest]
Thread overview: 26+ messages / expand[flat|nested] mbox.gz Atom feed top
2023-03-27 12:45 [kvm-unit-tests v3 00/13] powerpc: updates, P10, PNV support Nicholas Piggin
2023-03-27 12:45 ` [kvm-unit-tests v3 01/13] MAINTAINERS: Update powerpc list Nicholas Piggin
2023-03-27 12:45 ` [kvm-unit-tests v3 02/13] powerpc: Add local variant of SPR test Nicholas Piggin
2023-03-27 12:45 ` [kvm-unit-tests v3 03/13] powerpc: Add some checking to exception handler install Nicholas Piggin
2023-03-27 14:39 ` Thomas Huth
2023-03-28 6:53 ` Nicholas Piggin
2023-03-27 12:45 ` [kvm-unit-tests v3 04/13] powerpc: Abstract H_CEDE calls into a sleep functions Nicholas Piggin
2023-03-27 12:45 ` [kvm-unit-tests v3 05/13] powerpc: Add ISA v3.1 (POWER10) support to SPR test Nicholas Piggin
2023-03-27 12:45 ` [kvm-unit-tests v3 06/13] powerpc: Extract some common helpers and defines to headers Nicholas Piggin
2023-03-27 12:45 ` [kvm-unit-tests v3 07/13] powerpc/sprs: Specify SPRs with data rather than code Nicholas Piggin
2023-04-04 7:02 ` Thomas Huth
2023-03-27 12:45 ` [kvm-unit-tests v3 08/13] powerpc/spapr_vpa: Add basic VPA tests Nicholas Piggin
2023-04-04 7:17 ` Thomas Huth
2023-03-27 12:45 ` [kvm-unit-tests v3 09/13] powerpc: Expand exception handler vector granularity Nicholas Piggin
2023-04-04 7:18 ` Thomas Huth
2023-03-27 12:45 ` [kvm-unit-tests v3 10/13] powerpc: Add support for more interrupts including HV interrupts Nicholas Piggin
2023-04-04 7:32 ` Thomas Huth
2023-04-05 23:45 ` Joel Stanley
2023-03-27 12:45 ` [kvm-unit-tests v3 11/13] powerpc: Discover runtime load address dynamically Nicholas Piggin
2023-04-04 7:34 ` Thomas Huth
2023-03-27 12:45 ` [kvm-unit-tests v3 12/13] powerpc: Support powernv machine with QEMU TCG Nicholas Piggin
2023-03-27 16:06 ` Cédric Le Goater
2023-03-27 12:45 ` Nicholas Piggin [this message]
2023-03-27 16:09 ` [kvm-unit-tests v3 00/13] powerpc: updates, P10, PNV support Cédric Le Goater
2023-03-28 7:15 ` Nicholas Piggin
2023-03-28 7:32 ` Cédric Le Goater
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20230327124520.2707537-14-npiggin@gmail.com \
--to=npiggin@gmail.com \
--cc=kvm@vger.kernel.org \
--cc=linuxppc-dev@lists.ozlabs.org \
--cc=lvivier@redhat.com \
--cc=thuth@redhat.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).