From: Bjorn Helgaas <helgaas@kernel.org>
To: Kai-Heng Feng <kai.heng.feng@canonical.com>
Cc: sathyanarayanan.kuppuswamy@linux.intel.com,
linuxppc-dev@lists.ozlabs.org,
Mahesh J Salgaonkar <mahesh@linux.ibm.com>,
linux-kernel@vger.kernel.org, koba.ko@canonical.com,
Oliver O'Halloran <oohall@gmail.com>,
linux-pci@vger.kernel.org, bhelgaas@google.com,
mika.westerberg@linux.intel.com
Subject: Re: [PATCH v4 2/3] PCI/AER: Disable AER interrupt on suspend
Date: Fri, 5 May 2023 14:22:08 -0500 [thread overview]
Message-ID: <20230505192208.GA970992@bhelgaas> (raw)
In-Reply-To: <20230424055249.460381-2-kai.heng.feng@canonical.com>
On Mon, Apr 24, 2023 at 01:52:48PM +0800, Kai-Heng Feng wrote:
> PCIe service that shares IRQ with PME may cause spurious wakeup on
> system suspend.
>
> PCIe Base Spec 5.0, section 5.2 "Link State Power Management" states
> that TLP and DLLP transmission is disabled for a Link in L2/L3 Ready
> (D3hot), L2 (D3cold with aux power) and L3 (D3cold), so we don't lose
> much here to disable AER during system suspend.
>
> This is very similar to previous attempts to suspend AER and DPC [1],
> but with a different reason.
What is the reason? I assume it's something to do with the bugzilla
below, but the commit log should outline the user-visible problem this
fixes. The commit log basically makes the case for "why should we
merge this patch."
I assume it's along the lines of "I tried to suspend this system, but
it immediately woke up again because of an AER interrupt, and
disabling AER during suspend avoids this problem. And disabling
the AER interrupt is not a problem because X"
> [1] https://lore.kernel.org/linux-pci/20220408153159.106741-1-kai.heng.feng@canonical.com/
> Link: https://bugzilla.kernel.org/show_bug.cgi?id=216295
>
> Reviewed-by: Mika Westerberg <mika.westerberg@linux.intel.com>
> Signed-off-by: Kai-Heng Feng <kai.heng.feng@canonical.com>
> ---
> drivers/pci/pcie/aer.c | 22 ++++++++++++++++++++++
> 1 file changed, 22 insertions(+)
>
> diff --git a/drivers/pci/pcie/aer.c b/drivers/pci/pcie/aer.c
> index 1420e1f27105..9c07fdbeb52d 100644
> --- a/drivers/pci/pcie/aer.c
> +++ b/drivers/pci/pcie/aer.c
> @@ -1356,6 +1356,26 @@ static int aer_probe(struct pcie_device *dev)
> return 0;
> }
>
> +static int aer_suspend(struct pcie_device *dev)
> +{
> + struct aer_rpc *rpc = get_service_data(dev);
> + struct pci_dev *pdev = rpc->rpd;
> +
> + aer_disable_irq(pdev);
> +
> + return 0;
> +}
> +
> +static int aer_resume(struct pcie_device *dev)
> +{
> + struct aer_rpc *rpc = get_service_data(dev);
> + struct pci_dev *pdev = rpc->rpd;
> +
> + aer_enable_irq(pdev);
> +
> + return 0;
> +}
> +
> /**
> * aer_root_reset - reset Root Port hierarchy, RCEC, or RCiEP
> * @dev: pointer to Root Port, RCEC, or RCiEP
> @@ -1420,6 +1440,8 @@ static struct pcie_port_service_driver aerdriver = {
> .service = PCIE_PORT_SERVICE_AER,
>
> .probe = aer_probe,
> + .suspend = aer_suspend,
> + .resume = aer_resume,
> .remove = aer_remove,
> };
>
> --
> 2.34.1
>
next prev parent reply other threads:[~2023-05-05 19:23 UTC|newest]
Thread overview: 11+ messages / expand[flat|nested] mbox.gz Atom feed top
2023-04-24 5:52 [PATCH v4 1/3] PCI/AER: Factor out interrupt toggling into helpers Kai-Heng Feng
2023-04-24 5:52 ` [PATCH v4 2/3] PCI/AER: Disable AER interrupt on suspend Kai-Heng Feng
2023-04-24 23:47 ` Sathyanarayanan Kuppuswamy
2023-04-25 5:55 ` Kai-Heng Feng
2023-04-25 5:58 ` Sathyanarayanan Kuppuswamy
2023-05-11 13:34 ` Kai-Heng Feng
2023-05-05 19:22 ` Bjorn Helgaas [this message]
2023-05-11 12:48 ` Kai-Heng Feng
2023-04-24 5:52 ` [PATCH v4 3/3] PCI/DPC: Disable DPC interrupt during suspend Kai-Heng Feng
2023-05-05 15:37 ` [PATCH v4 1/3] PCI/AER: Factor out interrupt toggling into helpers Jonathan Cameron
2023-05-11 12:48 ` Kai-Heng Feng
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20230505192208.GA970992@bhelgaas \
--to=helgaas@kernel.org \
--cc=bhelgaas@google.com \
--cc=kai.heng.feng@canonical.com \
--cc=koba.ko@canonical.com \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-pci@vger.kernel.org \
--cc=linuxppc-dev@lists.ozlabs.org \
--cc=mahesh@linux.ibm.com \
--cc=mika.westerberg@linux.intel.com \
--cc=oohall@gmail.com \
--cc=sathyanarayanan.kuppuswamy@linux.intel.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).