linuxppc-dev.lists.ozlabs.org archive mirror
 help / color / mirror / Atom feed
From: Sasha Levin <sashal@kernel.org>
To: linux-kernel@vger.kernel.org, stable@vger.kernel.org
Cc: Sasha Levin <sashal@kernel.org>,
	alsa-devel@alsa-project.org, Xiubo.Lee@gmail.com,
	linuxppc-dev@lists.ozlabs.org, tiwai@suse.com,
	lgirdwood@gmail.com, perex@perex.cz,
	Mark Brown <broonie@kernel.org>,
	Chancel Liu <chancel.liu@nxp.com>,
	Shengjiu Wang <shengjiu.wang@gmail.com>
Subject: [PATCH AUTOSEL 6.3 16/30] ASoC: fsl_sai: Enable BCI bit if SAI works on synchronous mode with BYP asserted
Date: Fri, 16 Jun 2023 06:25:04 -0400	[thread overview]
Message-ID: <20230616102521.673087-16-sashal@kernel.org> (raw)
In-Reply-To: <20230616102521.673087-1-sashal@kernel.org>

From: Chancel Liu <chancel.liu@nxp.com>

[ Upstream commit 32cf0046a652116d6a216d575f3049a9ff9dd80d ]

There's an issue on SAI synchronous mode that TX/RX side can't get BCLK
from RX/TX it sync with if BYP bit is asserted. It's a workaround to
fix it that enable SION of IOMUX pad control and assert BCI.

For example if TX sync with RX which means both TX and RX are using clk
form RX and BYP=1. TX can get BCLK only if the following two conditions
are valid:
1. SION of RX BCLK IOMUX pad is set to 1
2. BCI of TX is set to 1

Signed-off-by: Chancel Liu <chancel.liu@nxp.com>
Acked-by: Shengjiu Wang <shengjiu.wang@gmail.com>
Link: https://lore.kernel.org/r/20230530103012.3448838-1-chancel.liu@nxp.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 sound/soc/fsl/fsl_sai.c | 11 +++++++++--
 sound/soc/fsl/fsl_sai.h |  1 +
 2 files changed, 10 insertions(+), 2 deletions(-)

diff --git a/sound/soc/fsl/fsl_sai.c b/sound/soc/fsl/fsl_sai.c
index 990bba0be1fb1..8a64f3c1d1556 100644
--- a/sound/soc/fsl/fsl_sai.c
+++ b/sound/soc/fsl/fsl_sai.c
@@ -491,14 +491,21 @@ static int fsl_sai_set_bclk(struct snd_soc_dai *dai, bool tx, u32 freq)
 	regmap_update_bits(sai->regmap, reg, FSL_SAI_CR2_MSEL_MASK,
 			   FSL_SAI_CR2_MSEL(sai->mclk_id[tx]));
 
-	if (savediv == 1)
+	if (savediv == 1) {
 		regmap_update_bits(sai->regmap, reg,
 				   FSL_SAI_CR2_DIV_MASK | FSL_SAI_CR2_BYP,
 				   FSL_SAI_CR2_BYP);
-	else
+		if (fsl_sai_dir_is_synced(sai, adir))
+			regmap_update_bits(sai->regmap, FSL_SAI_xCR2(tx, ofs),
+					   FSL_SAI_CR2_BCI, FSL_SAI_CR2_BCI);
+		else
+			regmap_update_bits(sai->regmap, FSL_SAI_xCR2(tx, ofs),
+					   FSL_SAI_CR2_BCI, 0);
+	} else {
 		regmap_update_bits(sai->regmap, reg,
 				   FSL_SAI_CR2_DIV_MASK | FSL_SAI_CR2_BYP,
 				   savediv / 2 - 1);
+	}
 
 	if (sai->soc_data->max_register >= FSL_SAI_MCTL) {
 		/* SAI is in master mode at this point, so enable MCLK */
diff --git a/sound/soc/fsl/fsl_sai.h b/sound/soc/fsl/fsl_sai.h
index 197748a888d5f..a53c4f0e25faf 100644
--- a/sound/soc/fsl/fsl_sai.h
+++ b/sound/soc/fsl/fsl_sai.h
@@ -116,6 +116,7 @@
 
 /* SAI Transmit and Receive Configuration 2 Register */
 #define FSL_SAI_CR2_SYNC	BIT(30)
+#define FSL_SAI_CR2_BCI		BIT(28)
 #define FSL_SAI_CR2_MSEL_MASK	(0x3 << 26)
 #define FSL_SAI_CR2_MSEL_BUS	0
 #define FSL_SAI_CR2_MSEL_MCLK1	BIT(26)
-- 
2.39.2


           reply	other threads:[~2023-06-16 10:26 UTC|newest]

Thread overview: expand[flat|nested]  mbox.gz  Atom feed
 [parent not found: <20230616102521.673087-1-sashal@kernel.org>]

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20230616102521.673087-16-sashal@kernel.org \
    --to=sashal@kernel.org \
    --cc=Xiubo.Lee@gmail.com \
    --cc=alsa-devel@alsa-project.org \
    --cc=broonie@kernel.org \
    --cc=chancel.liu@nxp.com \
    --cc=lgirdwood@gmail.com \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linuxppc-dev@lists.ozlabs.org \
    --cc=perex@perex.cz \
    --cc=shengjiu.wang@gmail.com \
    --cc=stable@vger.kernel.org \
    --cc=tiwai@suse.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).