[PATCH v3 1/2] PCI: layerscape: Add support for Link down notification

[PATCH v3 1/2] PCI: layerscape: Add support for Link down notification

[Frank Li]

Add support to pass Link down notification to Endpoint function driver
so that the LINK_DOWN event can be processed by the function.

Acked-by: Manivannan Sadhasivam <mani@kernel.org>
Signed-off-by: Frank Li <Frank.Li@nxp.com>
---
Change from v2 to v3
 - none
Change from v1 to v2
 - move pci_epc_linkdown() after dev_dbg()

 drivers/pci/controller/dwc/pci-layerscape-ep.c | 1 +
 1 file changed, 1 insertion(+)

diff --git a/drivers/pci/controller/dwc/pci-layerscape-ep.c b/drivers/pci/controller/dwc/pci-layerscape-ep.c
index de4c1758a6c3..e0969ff2ddf7 100644
--- a/drivers/pci/controller/dwc/pci-layerscape-ep.c
+++ b/drivers/pci/controller/dwc/pci-layerscape-ep.c
@@ -89,6 +89,7 @@ static irqreturn_t ls_pcie_ep_event_handler(int irq, void *dev_id)
 		dev_dbg(pci->dev, "Link up\n");
 	} else if (val & PEX_PF0_PME_MES_DR_LDD) {
 		dev_dbg(pci->dev, "Link down\n");
+		pci_epc_linkdown(pci->ep.epc);
 	} else if (val & PEX_PF0_PME_MES_DR_HRD) {
 		dev_dbg(pci->dev, "Hot reset\n");
 	}
-- 
2.34.1

[PATCH v3 2/2] PCI: layerscape: Add the workaround for lost link capabilities during reset.

[Frank Li]

From: Xiaowei Bao <xiaowei.bao@nxp.com>

A workaround for the issue where the PCI Express Endpoint (EP) controller
loses the values of the Maximum Link Width and Supported Link Speed from
the Link Capabilities Register, which initially configured by the Reset
Configuration Word (RCW) during a link-down or hot reset event.

Fixes: a805770d8a22 ("PCI: layerscape: Add EP mode support")
Acked-by: Manivannan Sadhasivam <mani@kernel.org>
Signed-off-by: Xiaowei Bao <xiaowei.bao@nxp.com>
Signed-off-by: Hou Zhiqiang <Zhiqiang.Hou@nxp.com>
Signed-off-by: Frank Li <Frank.Li@nxp.com>
---
change from v2 to v3
 - fix subject typo capabilities
change from v1 to v2:
 - add comments at restore register
 - add fixes tag
 - dw_pcie_writew_dbi to dw_pcie_writel_dbi

 .../pci/controller/dwc/pci-layerscape-ep.c    | 21 ++++++++++++++++++-
 1 file changed, 20 insertions(+), 1 deletion(-)

diff --git a/drivers/pci/controller/dwc/pci-layerscape-ep.c b/drivers/pci/controller/dwc/pci-layerscape-ep.c
index e0969ff2ddf7..39dbd911c3f8 100644
--- a/drivers/pci/controller/dwc/pci-layerscape-ep.c
+++ b/drivers/pci/controller/dwc/pci-layerscape-ep.c
@@ -45,6 +45,7 @@ struct ls_pcie_ep {
 	struct pci_epc_features		*ls_epc;
 	const struct ls_pcie_ep_drvdata *drvdata;
 	int				irq;
+	u32				lnkcap;
 	bool				big_endian;
 };
 
@@ -73,6 +74,7 @@ static irqreturn_t ls_pcie_ep_event_handler(int irq, void *dev_id)
 	struct ls_pcie_ep *pcie = dev_id;
 	struct dw_pcie *pci = pcie->pci;
 	u32 val, cfg;
+	u8 offset;
 
 	val = ls_lut_readl(pcie, PEX_PF0_PME_MES_DR);
 	ls_lut_writel(pcie, PEX_PF0_PME_MES_DR, val);
@@ -81,12 +83,25 @@ static irqreturn_t ls_pcie_ep_event_handler(int irq, void *dev_id)
 		return IRQ_NONE;
 
 	if (val & PEX_PF0_PME_MES_DR_LUD) {
+
+		offset = dw_pcie_find_capability(pci, PCI_CAP_ID_EXP);
+
+		/*
+		 * The values of the Maximum Link Width and Supported Link
+		 * Speed from the Link Capabilities Register will be lost
+		 * during link down or hot reset. Restore initial value
+		 * that configured by the Reset Configuration Word (RCW).
+		 */
+		dw_pcie_dbi_ro_wr_en(pci);
+		dw_pcie_writel_dbi(pci, offset + PCI_EXP_LNKCAP, pcie->lnkcap);
+		dw_pcie_dbi_ro_wr_dis(pci);
+
 		cfg = ls_lut_readl(pcie, PEX_PF0_CONFIG);
 		cfg |= PEX_PF0_CFG_READY;
 		ls_lut_writel(pcie, PEX_PF0_CONFIG, cfg);
 		dw_pcie_ep_linkup(&pci->ep);
 
-		dev_dbg(pci->dev, "Link up\n");
+		dev_err(pci->dev, "Link up\n");
 	} else if (val & PEX_PF0_PME_MES_DR_LDD) {
 		dev_dbg(pci->dev, "Link down\n");
 		pci_epc_linkdown(pci->ep.epc);
@@ -216,6 +231,7 @@ static int __init ls_pcie_ep_probe(struct platform_device *pdev)
 	struct ls_pcie_ep *pcie;
 	struct pci_epc_features *ls_epc;
 	struct resource *dbi_base;
+	u8 offset;
 	int ret;
 
 	pcie = devm_kzalloc(dev, sizeof(*pcie), GFP_KERNEL);
@@ -252,6 +268,9 @@ static int __init ls_pcie_ep_probe(struct platform_device *pdev)
 
 	platform_set_drvdata(pdev, pcie);
 
+	offset = dw_pcie_find_capability(pci, PCI_CAP_ID_EXP);
+	pcie->lnkcap = dw_pcie_readl_dbi(pci, offset + PCI_EXP_LNKCAP);
+
 	ret = dw_pcie_ep_init(&pci->ep);
 	if (ret)
 		return ret;
-- 
2.34.1

Re: [PATCH v3 2/2] PCI: layerscape: Add the workaround for lost link capabilities during reset.

[Frank Li]

On Wed, Jul 19, 2023 at 11:57:07AM -0400, Frank Li wrote:
> From: Xiaowei Bao <xiaowei.bao@nxp.com>
> 
> A workaround for the issue where the PCI Express Endpoint (EP) controller
> loses the values of the Maximum Link Width and Supported Link Speed from
> the Link Capabilities Register, which initially configured by the Reset
> Configuration Word (RCW) during a link-down or hot reset event.
> 
> Fixes: a805770d8a22 ("PCI: layerscape: Add EP mode support")
> Acked-by: Manivannan Sadhasivam <mani@kernel.org>
> Signed-off-by: Xiaowei Bao <xiaowei.bao@nxp.com>
> Signed-off-by: Hou Zhiqiang <Zhiqiang.Hou@nxp.com>
> Signed-off-by: Frank Li <Frank.Li@nxp.com>
> ---
> change from v2 to v3
>  - fix subject typo capabilities
> change from v1 to v2:
>  - add comments at restore register
>  - add fixes tag
>  - dw_pcie_writew_dbi to dw_pcie_writel_dbi
> 
>  .../pci/controller/dwc/pci-layerscape-ep.c    | 21 ++++++++++++++++++-
>  1 file changed, 20 insertions(+), 1 deletion(-)
> 
> diff --git a/drivers/pci/controller/dwc/pci-layerscape-ep.c b/drivers/pci/controller/dwc/pci-layerscape-ep.c
> index e0969ff2ddf7..39dbd911c3f8 100644
> --- a/drivers/pci/controller/dwc/pci-layerscape-ep.c
> +++ b/drivers/pci/controller/dwc/pci-layerscape-ep.c
> @@ -45,6 +45,7 @@ struct ls_pcie_ep {
>  	struct pci_epc_features		*ls_epc;
>  	const struct ls_pcie_ep_drvdata *drvdata;
>  	int				irq;
> +	u32				lnkcap;
>  	bool				big_endian;
>  };
>  
> @@ -73,6 +74,7 @@ static irqreturn_t ls_pcie_ep_event_handler(int irq, void *dev_id)
>  	struct ls_pcie_ep *pcie = dev_id;
>  	struct dw_pcie *pci = pcie->pci;
>  	u32 val, cfg;
> +	u8 offset;
>  
>  	val = ls_lut_readl(pcie, PEX_PF0_PME_MES_DR);
>  	ls_lut_writel(pcie, PEX_PF0_PME_MES_DR, val);
> @@ -81,12 +83,25 @@ static irqreturn_t ls_pcie_ep_event_handler(int irq, void *dev_id)
>  		return IRQ_NONE;
>  
>  	if (val & PEX_PF0_PME_MES_DR_LUD) {
> +
> +		offset = dw_pcie_find_capability(pci, PCI_CAP_ID_EXP);
> +
> +		/*
> +		 * The values of the Maximum Link Width and Supported Link
> +		 * Speed from the Link Capabilities Register will be lost
> +		 * during link down or hot reset. Restore initial value
> +		 * that configured by the Reset Configuration Word (RCW).
> +		 */
> +		dw_pcie_dbi_ro_wr_en(pci);
> +		dw_pcie_writel_dbi(pci, offset + PCI_EXP_LNKCAP, pcie->lnkcap);
> +		dw_pcie_dbi_ro_wr_dis(pci);
> +
>  		cfg = ls_lut_readl(pcie, PEX_PF0_CONFIG);
>  		cfg |= PEX_PF0_CFG_READY;
>  		ls_lut_writel(pcie, PEX_PF0_CONFIG, cfg);
>  		dw_pcie_ep_linkup(&pci->ep);
>  
> -		dev_dbg(pci->dev, "Link up\n");
> +		dev_err(pci->dev, "Link up\n");

Sorry, Just found that. mistake merge a debug code.
It should be dev_dbg here, will send update patch soon

Frank

>  	} else if (val & PEX_PF0_PME_MES_DR_LDD) {
>  		dev_dbg(pci->dev, "Link down\n");
>  		pci_epc_linkdown(pci->ep.epc);
> @@ -216,6 +231,7 @@ static int __init ls_pcie_ep_probe(struct platform_device *pdev)
>  	struct ls_pcie_ep *pcie;
>  	struct pci_epc_features *ls_epc;
>  	struct resource *dbi_base;
> +	u8 offset;
>  	int ret;
>  
>  	pcie = devm_kzalloc(dev, sizeof(*pcie), GFP_KERNEL);
> @@ -252,6 +268,9 @@ static int __init ls_pcie_ep_probe(struct platform_device *pdev)
>  
>  	platform_set_drvdata(pdev, pcie);
>  
> +	offset = dw_pcie_find_capability(pci, PCI_CAP_ID_EXP);
> +	pcie->lnkcap = dw_pcie_readl_dbi(pci, offset + PCI_EXP_LNKCAP);
> +
>  	ret = dw_pcie_ep_init(&pci->ep);
>  	if (ret)
>  		return ret;
> -- 
> 2.34.1
> 

Re: [PATCH v3 1/2] PCI: layerscape: Add support for Link down notification

[Markus Elfring]

> Add support to pass …

Why did you omit a cover letter for the discussed patch series once more?

Do you care for consequences according to message threading?

Regards,
Markus

Re: [PATCH v3 1/2] PCI: layerscape: Add support for Link down notification

[Frank Li]

On Wed, Jul 19, 2023 at 09:27:23PM +0200, Markus Elfring wrote:
> > Add support to pass …
> 
> Why did you omit a cover letter for the discussed patch series once more?

Your comments is 
"Will a cover letter become helpful also for the presented small patch series?"

According to my understand it is optional. I don't think cover letter will
help this case. Patch 1 and 2 is that independent at all. 

I sent these together just because easy to test once.

Maintainer can pick any one individually. 

Cover letter just annoise people here.

Frank


> 
> Do you care for consequences according to message threading?
> 
> Regards,
> Markus

Re: [v3 1/2] PCI: layerscape: Add support for Link down notification

[Markus Elfring]

> Cover letter just annoise people here.

How do you think about advices from another information source?

See also:
https://kernelnewbies.org/PatchSeries

Regards,
Markus

Re: [v3 1/2] PCI: layerscape: Add support for Link down notification

[Frank Li]

On Wed, Jul 19, 2023 at 10:08:16PM +0200, Markus Elfring wrote:
> > Cover letter just annoise people here.
> 
> How do you think about advices from another information source?
> 
> See also:
> https://kernelnewbies.org/PatchSeries

"You may like to include a cover letter with your patch series."

Generally, I think cover letter will be needed only if it really
help reviewer to get main idea about patches. 

Such as my on going pathes(with cover letter):
  https://lore.kernel.org/imx/ZLglBiSz0meJm5os@lizhi-Precision-Tower-5810/T/#t

Similar case without(cover leter) and accepted.
 https://lore.kernel.org/imx/20230719063425.GE151430@dragon/T/#t

I don't think cover letter real help reviewer to review these two patches.

I more like to get "real problem"(such as comments about "typo").

It is just waste time to discuss if need add cover letter here.

Frank

> 
> Regards,
> Markus