linuxppc-dev.lists.ozlabs.org archive mirror
 help / color / mirror / Atom feed
From: Pingfan Liu <piliu@redhat.com>
To: linuxppc-dev@lists.ozlabs.org
Cc: Baoquan He <bhe@redhat.com>, Pingfan Liu <piliu@redhat.com>,
	kexec@lists.infradead.org,
	Mahesh Salgaonkar <mahesh@linux.ibm.com>,
	Ming Lei <ming.lei@redhat.com>, kernel test robot <lkp@intel.com>,
	Nicholas Piggin <npiggin@gmail.com>,
	Wen Xiong <wenxiong@us.ibm.com>
Subject: [PATCHv7 1/4] powerpc/setup : Enable boot_cpu_hwid for PPC32
Date: Mon, 25 Sep 2023 15:53:45 +0800	[thread overview]
Message-ID: <20230925075348.16654-2-piliu@redhat.com> (raw)
In-Reply-To: <20230925075348.16654-1-piliu@redhat.com>

In order to identify the boot cpu, its intserv[] should be recorded and
checked in smp_setup_cpu_maps().

smp_setup_cpu_maps() is shared between PPC64 and PPC32. Since PPC64 has
already used boot_cpu_hwid to carry that information, enabling this
variable on PPC32 so later it can also be used to carry that information
for PPC32 in the coming patch.

Signed-off-by: Pingfan Liu <piliu@redhat.com>
Cc: Michael Ellerman <mpe@ellerman.id.au>
Cc: Nicholas Piggin <npiggin@gmail.com>
Cc: Christophe Leroy <christophe.leroy@csgroup.eu>
Cc: Mahesh Salgaonkar <mahesh@linux.ibm.com>
Cc: Wen Xiong <wenxiong@us.ibm.com>
Cc: Baoquan He <bhe@redhat.com>
Cc: Ming Lei <ming.lei@redhat.com>
Cc: kexec@lists.infradead.org
To: linuxppc-dev@lists.ozlabs.org
Reported-by: kernel test robot <lkp@intel.com>
Closes: https://lore.kernel.org/oe-kbuild-all/202309130232.N2REwHBv-lkp@intel.com/
---
 arch/powerpc/include/asm/smp.h     | 2 +-
 arch/powerpc/kernel/prom.c         | 3 +--
 arch/powerpc/kernel/setup-common.c | 2 --
 3 files changed, 2 insertions(+), 5 deletions(-)

diff --git a/arch/powerpc/include/asm/smp.h b/arch/powerpc/include/asm/smp.h
index aaaa576d0e15..5db9178cc800 100644
--- a/arch/powerpc/include/asm/smp.h
+++ b/arch/powerpc/include/asm/smp.h
@@ -26,7 +26,7 @@
 #include <asm/percpu.h>
 
 extern int boot_cpuid;
-extern int boot_cpu_hwid; /* PPC64 only */
+extern int boot_cpu_hwid;
 extern int spinning_secondaries;
 extern u32 *cpu_to_phys_id;
 extern bool coregroup_enabled;
diff --git a/arch/powerpc/kernel/prom.c b/arch/powerpc/kernel/prom.c
index 0b5878c3125b..ec82f5bda908 100644
--- a/arch/powerpc/kernel/prom.c
+++ b/arch/powerpc/kernel/prom.c
@@ -372,8 +372,7 @@ static int __init early_init_dt_scan_cpus(unsigned long node,
 	    be32_to_cpu(intserv[found_thread]));
 	boot_cpuid = found;
 
-	if (IS_ENABLED(CONFIG_PPC64))
-		boot_cpu_hwid = be32_to_cpu(intserv[found_thread]);
+	boot_cpu_hwid = be32_to_cpu(intserv[found_thread]);
 
 	/*
 	 * PAPR defines "logical" PVR values for cpus that
diff --git a/arch/powerpc/kernel/setup-common.c b/arch/powerpc/kernel/setup-common.c
index d2a446216444..1b19a9815672 100644
--- a/arch/powerpc/kernel/setup-common.c
+++ b/arch/powerpc/kernel/setup-common.c
@@ -87,9 +87,7 @@ EXPORT_SYMBOL(machine_id);
 int boot_cpuid = -1;
 EXPORT_SYMBOL_GPL(boot_cpuid);
 
-#ifdef CONFIG_PPC64
 int boot_cpu_hwid = -1;
-#endif
 
 /*
  * These are used in binfmt_elf.c to put aux entries on the stack
-- 
2.31.1


  reply	other threads:[~2023-09-25  7:55 UTC|newest]

Thread overview: 10+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2023-09-25  7:53 [PATCHv7 0/4] enable nr_cpus for powerpc Pingfan Liu
2023-09-25  7:53 ` Pingfan Liu [this message]
2023-09-25  7:53 ` [PATCHv7 2/4] powerpc/setup: Loosen the mapping between cpu logical id and its seq in dt Pingfan Liu
2023-09-28 20:36   ` Wen Xiong
2023-09-29  3:19     ` Pingfan Liu
2023-09-29  6:43     ` Christophe Leroy
2023-09-25  7:53 ` [PATCHv7 3/4] powerpc/setup: Handle the case when boot_cpuid greater than nr_cpus Pingfan Liu
2023-09-25  7:53 ` [PATCHv7 4/4] powerpc/setup: alloc extra paca_ptrs to hold boot_cpuid Pingfan Liu
2023-10-03 18:06   ` Mahesh J Salgaonkar
2023-10-07  1:03     ` Pingfan Liu

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20230925075348.16654-2-piliu@redhat.com \
    --to=piliu@redhat.com \
    --cc=bhe@redhat.com \
    --cc=kexec@lists.infradead.org \
    --cc=linuxppc-dev@lists.ozlabs.org \
    --cc=lkp@intel.com \
    --cc=mahesh@linux.ibm.com \
    --cc=ming.lei@redhat.com \
    --cc=npiggin@gmail.com \
    --cc=wenxiong@us.ibm.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).