[PATCH v3 3/4] PCI: layerscape: Rename pf_* as pf_lut_*

[Frank Li <Frank.Li@nxp.com>]

'pf' and 'lut' is just difference name in difference chips, but basic it is
a MMIO base address plus an offset.

Rename it to avoid duplicate pf_* and lut_* in driver.

Signed-off-by: Frank Li <Frank.Li@nxp.com>
---

Notes:
    change from v1 to v3
    - new patch at v3

 drivers/pci/controller/dwc/pci-layerscape.c | 34 ++++++++++-----------
 1 file changed, 17 insertions(+), 17 deletions(-)

diff --git a/drivers/pci/controller/dwc/pci-layerscape.c b/drivers/pci/controller/dwc/pci-layerscape.c
index 6f47cfe146c44..4b663b20d8612 100644
--- a/drivers/pci/controller/dwc/pci-layerscape.c
+++ b/drivers/pci/controller/dwc/pci-layerscape.c
@@ -46,7 +46,7 @@
 #define LS_PCIE_DRV_SCFG	BIT(0)
 
 struct ls_pcie_drvdata {
-	const u32 pf_off;
+	const u32 pf_lut_off;
 	const struct dw_pcie_host_ops *ops;
 	int (*exit_from_l2)(struct dw_pcie_rp *pp);
 	int flags;
@@ -56,13 +56,13 @@ struct ls_pcie_drvdata {
 struct ls_pcie {
 	struct dw_pcie *pci;
 	const struct ls_pcie_drvdata *drvdata;
-	void __iomem *pf_base;
+	void __iomem *pf_lut_base;
 	struct regmap *scfg;
 	int index;
 	bool big_endian;
 };
 
-#define ls_pcie_pf_readl_addr(addr)	ls_pcie_pf_readl(pcie, addr)
+#define ls_pcie_pf_lut_readl_addr(addr)	ls_pcie_pf_lut_readl(pcie, addr)
 #define to_ls_pcie(x)	dev_get_drvdata((x)->dev)
 
 static bool ls_pcie_is_bridge(struct ls_pcie *pcie)
@@ -103,20 +103,20 @@ static void ls_pcie_fix_error_response(struct ls_pcie *pcie)
 	iowrite32(PCIE_ABSERR_SETTING, pci->dbi_base + PCIE_ABSERR);
 }
 
-static u32 ls_pcie_pf_readl(struct ls_pcie *pcie, u32 off)
+static u32 ls_pcie_pf_lut_readl(struct ls_pcie *pcie, u32 off)
 {
 	if (pcie->big_endian)
-		return ioread32be(pcie->pf_base + off);
+		return ioread32be(pcie->pf_lut_base + off);
 
-	return ioread32(pcie->pf_base + off);
+	return ioread32(pcie->pf_lut_base + off);
 }
 
-static void ls_pcie_pf_writel(struct ls_pcie *pcie, u32 off, u32 val)
+static void ls_pcie_pf_lut_writel(struct ls_pcie *pcie, u32 off, u32 val)
 {
 	if (pcie->big_endian)
-		iowrite32be(val, pcie->pf_base + off);
+		iowrite32be(val, pcie->pf_lut_base + off);
 	else
-		iowrite32(val, pcie->pf_base + off);
+		iowrite32(val, pcie->pf_lut_base + off);
 }
 
 static void ls_pcie_send_turnoff_msg(struct dw_pcie_rp *pp)
@@ -126,11 +126,11 @@ static void ls_pcie_send_turnoff_msg(struct dw_pcie_rp *pp)
 	u32 val;
 	int ret;
 
-	val = ls_pcie_pf_readl(pcie, LS_PCIE_PF_MCR);
+	val = ls_pcie_pf_lut_readl(pcie, LS_PCIE_PF_MCR);
 	val |= PF_MCR_PTOMR;
-	ls_pcie_pf_writel(pcie, LS_PCIE_PF_MCR, val);
+	ls_pcie_pf_lut_writel(pcie, LS_PCIE_PF_MCR, val);
 
-	ret = readx_poll_timeout(ls_pcie_pf_readl_addr, LS_PCIE_PF_MCR,
+	ret = readx_poll_timeout(ls_pcie_pf_lut_readl_addr, LS_PCIE_PF_MCR,
 				 val, !(val & PF_MCR_PTOMR),
 				 PCIE_PME_TO_L2_TIMEOUT_US/10,
 				 PCIE_PME_TO_L2_TIMEOUT_US);
@@ -149,15 +149,15 @@ static int ls_pcie_exit_from_l2(struct dw_pcie_rp *pp)
 	 * Set PF_MCR_EXL2S bit in LS_PCIE_PF_MCR register for the link
 	 * to exit L2 state.
 	 */
-	val = ls_pcie_pf_readl(pcie, LS_PCIE_PF_MCR);
+	val = ls_pcie_pf_lut_readl(pcie, LS_PCIE_PF_MCR);
 	val |= PF_MCR_EXL2S;
-	ls_pcie_pf_writel(pcie, LS_PCIE_PF_MCR, val);
+	ls_pcie_pf_lut_writel(pcie, LS_PCIE_PF_MCR, val);
 
 	/*
 	 * L2 exit timeout of 10ms is not defined in the specifications,
 	 * it was chosen based on empirical observations.
 	 */
-	ret = readx_poll_timeout(ls_pcie_pf_readl_addr, LS_PCIE_PF_MCR,
+	ret = readx_poll_timeout(ls_pcie_pf_lut_readl_addr, LS_PCIE_PF_MCR,
 				 val, !(val & PF_MCR_EXL2S),
 				 1000,
 				 10000);
@@ -245,7 +245,7 @@ static const struct ls_pcie_drvdata ls1021a_drvdata = {
 };
 
 static const struct ls_pcie_drvdata layerscape_drvdata = {
-	.pf_off = 0xc0000,
+	.pf_lut_off = 0xc0000,
 	.pm_support = true,
 	.exit_from_l2 = ls_pcie_exit_from_l2,
 };
@@ -295,7 +295,7 @@ static int ls_pcie_probe(struct platform_device *pdev)
 
 	pcie->big_endian = of_property_read_bool(dev->of_node, "big-endian");
 
-	pcie->pf_base = pci->dbi_base + pcie->drvdata->pf_off;
+	pcie->pf_lut_base = pci->dbi_base + pcie->drvdata->pf_lut_off;
 
 	if (pcie->drvdata->flags & LS_PCIE_DRV_SCFG) {
 
-- 
2.34.1