linuxppc-dev.lists.ozlabs.org archive mirror
 help / color / mirror / Atom feed
From: Bjorn Helgaas <helgaas@kernel.org>
To: Kai-Heng Feng <kai.heng.feng@canonical.com>
Cc: sathyanarayanan.kuppuswamy@linux.intel.com,
	mika.westerberg@linux.intel.com, linux-pci@vger.kernel.org,
	Mahesh J Salgaonkar <mahesh@linux.ibm.com>,
	linux-kernel@vger.kernel.org, koba.ko@canonical.com,
	Oliver O'Halloran <oohall@gmail.com>,
	Jonathan Cameron <Jonathan.Cameron@huawei.com>,
	bhelgaas@google.com, linuxppc-dev@lists.ozlabs.org
Subject: Re: [PATCH v6 1/3] PCI/AER: Factor out interrupt toggling into helpers
Date: Wed, 25 Oct 2023 17:29:08 -0500	[thread overview]
Message-ID: <20231025222908.GA1770972@bhelgaas> (raw)
In-Reply-To: <20230512000014.118942-1-kai.heng.feng@canonical.com>

On Fri, May 12, 2023 at 08:00:12AM +0800, Kai-Heng Feng wrote:
> There are many places that enable and disable AER interrupt, so move
> them into helpers.
> 
> Reviewed-by: Mika Westerberg <mika.westerberg@linux.intel.com>
> Reviewed-by: Kuppuswamy Sathyanarayanan <sathyanarayanan.kuppuswamy@linux.intel.com>
> Reviewed-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
> Signed-off-by: Kai-Heng Feng <kai.heng.feng@canonical.com>

I applied this patch (only 1/3) to pci/aer for v6.7.

I'm not clear on the others yet, so let's look at those again after
v6.7-rc1.  It seemed like there's still a question about disabling
interrupts when we're going to D3hot.

>  drivers/pci/pcie/aer.c | 45 +++++++++++++++++++++++++-----------------
>  1 file changed, 27 insertions(+), 18 deletions(-)
> 
> diff --git a/drivers/pci/pcie/aer.c b/drivers/pci/pcie/aer.c
> index f6c24ded134c..1420e1f27105 100644
> --- a/drivers/pci/pcie/aer.c
> +++ b/drivers/pci/pcie/aer.c
> @@ -1227,6 +1227,28 @@ static irqreturn_t aer_irq(int irq, void *context)
>  	return IRQ_WAKE_THREAD;
>  }
>  
> +static void aer_enable_irq(struct pci_dev *pdev)
> +{
> +	int aer = pdev->aer_cap;
> +	u32 reg32;
> +
> +	/* Enable Root Port's interrupt in response to error messages */
> +	pci_read_config_dword(pdev, aer + PCI_ERR_ROOT_COMMAND, &reg32);
> +	reg32 |= ROOT_PORT_INTR_ON_MESG_MASK;
> +	pci_write_config_dword(pdev, aer + PCI_ERR_ROOT_COMMAND, reg32);
> +}
> +
> +static void aer_disable_irq(struct pci_dev *pdev)
> +{
> +	int aer = pdev->aer_cap;
> +	u32 reg32;
> +
> +	/* Disable Root's interrupt in response to error messages */
> +	pci_read_config_dword(pdev, aer + PCI_ERR_ROOT_COMMAND, &reg32);
> +	reg32 &= ~ROOT_PORT_INTR_ON_MESG_MASK;
> +	pci_write_config_dword(pdev, aer + PCI_ERR_ROOT_COMMAND, reg32);
> +}
> +
>  /**
>   * aer_enable_rootport - enable Root Port's interrupts when receiving messages
>   * @rpc: pointer to a Root Port data structure
> @@ -1256,10 +1278,7 @@ static void aer_enable_rootport(struct aer_rpc *rpc)
>  	pci_read_config_dword(pdev, aer + PCI_ERR_UNCOR_STATUS, &reg32);
>  	pci_write_config_dword(pdev, aer + PCI_ERR_UNCOR_STATUS, reg32);
>  
> -	/* Enable Root Port's interrupt in response to error messages */
> -	pci_read_config_dword(pdev, aer + PCI_ERR_ROOT_COMMAND, &reg32);
> -	reg32 |= ROOT_PORT_INTR_ON_MESG_MASK;
> -	pci_write_config_dword(pdev, aer + PCI_ERR_ROOT_COMMAND, reg32);
> +	aer_enable_irq(pdev);
>  }
>  
>  /**
> @@ -1274,10 +1293,7 @@ static void aer_disable_rootport(struct aer_rpc *rpc)
>  	int aer = pdev->aer_cap;
>  	u32 reg32;
>  
> -	/* Disable Root's interrupt in response to error messages */
> -	pci_read_config_dword(pdev, aer + PCI_ERR_ROOT_COMMAND, &reg32);
> -	reg32 &= ~ROOT_PORT_INTR_ON_MESG_MASK;
> -	pci_write_config_dword(pdev, aer + PCI_ERR_ROOT_COMMAND, reg32);
> +	aer_disable_irq(pdev);
>  
>  	/* Clear Root's error status reg */
>  	pci_read_config_dword(pdev, aer + PCI_ERR_ROOT_STATUS, &reg32);
> @@ -1372,12 +1388,8 @@ static pci_ers_result_t aer_root_reset(struct pci_dev *dev)
>  	 */
>  	aer = root ? root->aer_cap : 0;
>  
> -	if ((host->native_aer || pcie_ports_native) && aer) {
> -		/* Disable Root's interrupt in response to error messages */
> -		pci_read_config_dword(root, aer + PCI_ERR_ROOT_COMMAND, &reg32);
> -		reg32 &= ~ROOT_PORT_INTR_ON_MESG_MASK;
> -		pci_write_config_dword(root, aer + PCI_ERR_ROOT_COMMAND, reg32);
> -	}
> +	if ((host->native_aer || pcie_ports_native) && aer)
> +		aer_disable_irq(root);
>  
>  	if (type == PCI_EXP_TYPE_RC_EC || type == PCI_EXP_TYPE_RC_END) {
>  		rc = pcie_reset_flr(dev, PCI_RESET_DO_RESET);
> @@ -1396,10 +1408,7 @@ static pci_ers_result_t aer_root_reset(struct pci_dev *dev)
>  		pci_read_config_dword(root, aer + PCI_ERR_ROOT_STATUS, &reg32);
>  		pci_write_config_dword(root, aer + PCI_ERR_ROOT_STATUS, reg32);
>  
> -		/* Enable Root Port's interrupt in response to error messages */
> -		pci_read_config_dword(root, aer + PCI_ERR_ROOT_COMMAND, &reg32);
> -		reg32 |= ROOT_PORT_INTR_ON_MESG_MASK;
> -		pci_write_config_dword(root, aer + PCI_ERR_ROOT_COMMAND, reg32);
> +		aer_enable_irq(root);
>  	}
>  
>  	return rc ? PCI_ERS_RESULT_DISCONNECT : PCI_ERS_RESULT_RECOVERED;
> -- 
> 2.34.1
> 

      parent reply	other threads:[~2023-10-25 22:30 UTC|newest]

Thread overview: 14+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2023-05-12  0:00 [PATCH v6 1/3] PCI/AER: Factor out interrupt toggling into helpers Kai-Heng Feng
2023-05-12  0:00 ` [PATCH v6 2/3] PCI/AER: Disable AER interrupt on suspend Kai-Heng Feng
2023-07-14  8:14   ` Kai-Heng Feng
2023-07-18 11:17   ` Bjorn Helgaas
2023-07-21  3:58     ` Kai-Heng Feng
2023-08-09  5:27       ` Kai-Heng Feng
2023-08-09 18:52       ` Bjorn Helgaas
2023-08-10  8:17         ` Kai-Heng Feng
2023-08-10 10:51           ` Bjorn Helgaas
2023-08-11  8:00             ` Kai-Heng Feng
2023-08-23  2:02               ` Kai-Heng Feng
2023-05-12  0:00 ` [PATCH v6 3/3] PCI/DPC: Disable DPC interrupt during suspend Kai-Heng Feng
2023-05-24  5:39 ` [PATCH v6 1/3] PCI/AER: Factor out interrupt toggling into helpers Kai-Heng Feng
2023-10-25 22:29 ` Bjorn Helgaas [this message]

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20231025222908.GA1770972@bhelgaas \
    --to=helgaas@kernel.org \
    --cc=Jonathan.Cameron@huawei.com \
    --cc=bhelgaas@google.com \
    --cc=kai.heng.feng@canonical.com \
    --cc=koba.ko@canonical.com \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux-pci@vger.kernel.org \
    --cc=linuxppc-dev@lists.ozlabs.org \
    --cc=mahesh@linux.ibm.com \
    --cc=mika.westerberg@linux.intel.com \
    --cc=oohall@gmail.com \
    --cc=sathyanarayanan.kuppuswamy@linux.intel.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).