[kvm-unit-tests PATCH 0/9] Multi-migration support

[kvm-unit-tests PATCH 0/9] Multi-migration support

[Nicholas Piggin]

Thomas suggested I should split this out of the powerpc series
because it is applicable to other archs as well and it's easier
for others to review like this.

Since the v5 series:
- Split out from powerpc changes
- Fixed another small race found when running migration tests
  on aarch64 (wait for destination machine to have qmp socket
  set up before issuing qmp commands to it).
- Added a directory for common tests, added the migration
  selftest to it, build it on arm and s390x as well.
- Add "quiet" migration support, use it in migration selftest.
- Cut down runtime for migration selftest so it is suitable for
  unit tests. Add it to unit tests.
- Fix a s390x make clean omission that bit me when testing
  it. This does not depend on the other patches.

Thanks,
Nick

Nicholas Piggin (9):
  s390x: clean lib/auxinfo.o
  arch-run: Clean up temporary files properly
  arch-run: Clean up initrd cleanup
  migration: use a more robust way to wait for background job
  migration: Support multiple migrations
  arch-run: rename migration variables
  migration: Add quiet migration support
  Add common/ directory for architecture-independent tests
  migration: add a migration selftest

 arm/Makefile.common         |   1 +
 arm/sieve.c                 |   2 +-
 arm/unittests.cfg           |   6 ++
 common/selftest-migration.c |  34 +++++++
 common/sieve.c              |  51 ++++++++++
 lib/migrate.c               |  20 +++-
 lib/migrate.h               |   2 +
 powerpc/Makefile.common     |   1 +
 powerpc/unittests.cfg       |   4 +
 s390x/Makefile              |   3 +-
 s390x/sieve.c               |   2 +-
 s390x/unittests.cfg         |   4 +
 scripts/arch-run.bash       | 181 ++++++++++++++++++++++++++----------
 x86/sieve.c                 |  52 +----------
 14 files changed, 258 insertions(+), 105 deletions(-)
 create mode 100644 common/selftest-migration.c
 create mode 100644 common/sieve.c
 mode change 100644 => 120000 x86/sieve.c

-- 
2.42.0

[kvm-unit-tests PATCH 1/9] s390x: clean lib/auxinfo.o

[Nicholas Piggin]

Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
---
 s390x/Makefile | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/s390x/Makefile b/s390x/Makefile
index f79fd009..95ef9533 100644
--- a/s390x/Makefile
+++ b/s390x/Makefile
@@ -227,7 +227,7 @@ $(snippet_asmlib): $$(patsubst %.o,%.S,$$@) $(asm-offsets)
 
 
 arch_clean: asm_offsets_clean
-	$(RM) $(TEST_DIR)/*.{o,elf,bin,lds} $(SNIPPET_DIR)/*/*.{o,elf,*bin,*obj,hdr,lds} $(SNIPPET_DIR)/asm/.*.d $(TEST_DIR)/.*.d lib/s390x/.*.d $(comm-key)
+	$(RM) $(TEST_DIR)/*.{o,elf,bin,lds} $(SNIPPET_DIR)/*/*.{o,elf,*bin,*obj,hdr,lds} $(SNIPPET_DIR)/asm/.*.d $(TEST_DIR)/.*.d lib/s390x/.*.d lib/auxinfo.o $(comm-key)
 
 generated-files = $(asm-offsets)
 $(tests:.elf=.o) $(asmlib) $(cflatobjs): $(generated-files)
-- 
2.42.0

[kvm-unit-tests PATCH 2/9] arch-run: Clean up temporary files properly

[Nicholas Piggin]

Migration files weren't being removed when tests were interrupted.
This improves the situation.

Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
---
 scripts/arch-run.bash | 12 +++++++-----
 1 file changed, 7 insertions(+), 5 deletions(-)

diff --git a/scripts/arch-run.bash b/scripts/arch-run.bash
index d0864360..f22ead6f 100644
--- a/scripts/arch-run.bash
+++ b/scripts/arch-run.bash
@@ -134,12 +134,14 @@ run_migration ()
 	qmp1=$(mktemp -u -t mig-helper-qmp1.XXXXXXXXXX)
 	qmp2=$(mktemp -u -t mig-helper-qmp2.XXXXXXXXXX)
 	fifo=$(mktemp -u -t mig-helper-fifo.XXXXXXXXXX)
+
+	# race here between file creation and trap
+	trap "trap - TERM ; kill 0 ; exit 2" INT TERM
+	trap "rm -f ${migout1} ${migsock} ${qmp1} ${qmp2} ${fifo}" RETURN EXIT
+
 	qmpout1=/dev/null
 	qmpout2=/dev/null
 
-	trap 'kill 0; exit 2' INT TERM
-	trap 'rm -f ${migout1} ${migsock} ${qmp1} ${qmp2} ${fifo}' RETURN EXIT
-
 	eval "$@" -chardev socket,id=mon1,path=${qmp1},server=on,wait=off \
 		-mon chardev=mon1,mode=control | tee ${migout1} &
 	live_pid=`jobs -l %+ | grep "eval" | awk '{print$2}'`
@@ -211,8 +213,8 @@ run_panic ()
 
 	qmp=$(mktemp -u -t panic-qmp.XXXXXXXXXX)
 
-	trap 'kill 0; exit 2' INT TERM
-	trap 'rm -f ${qmp}' RETURN EXIT
+	trap "trap - TERM ; kill 0 ; exit 2" INT TERM
+	trap "rm -f ${qmp}" RETURN EXIT
 
 	# start VM stopped so we don't miss any events
 	eval "$@" -chardev socket,id=mon1,path=${qmp},server=on,wait=off \
-- 
2.42.0

[kvm-unit-tests PATCH 3/9] arch-run: Clean up initrd cleanup

[Nicholas Piggin]

Rather than put a big script into the trap handler, have it call
a function.

Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
---
 scripts/arch-run.bash | 12 +++++++++++-
 1 file changed, 11 insertions(+), 1 deletion(-)

diff --git a/scripts/arch-run.bash b/scripts/arch-run.bash
index f22ead6f..cc7da7c5 100644
--- a/scripts/arch-run.bash
+++ b/scripts/arch-run.bash
@@ -271,10 +271,20 @@ search_qemu_binary ()
 	export PATH=$save_path
 }
 
+initrd_cleanup ()
+{
+	if [ "$KVM_UNIT_TESTS_ENV_OLD" ]; then
+		export KVM_UNIT_TESTS_ENV="$KVM_UNIT_TESTS_ENV_OLD"
+	else
+		unset KVM_UNIT_TESTS_ENV
+		unset KVM_UNIT_TESTS_ENV_OLD
+	fi
+}
+
 initrd_create ()
 {
 	if [ "$ENVIRON_DEFAULT" = "yes" ]; then
-		trap_exit_push 'rm -f $KVM_UNIT_TESTS_ENV; [ "$KVM_UNIT_TESTS_ENV_OLD" ] && export KVM_UNIT_TESTS_ENV="$KVM_UNIT_TESTS_ENV_OLD" || unset KVM_UNIT_TESTS_ENV; unset KVM_UNIT_TESTS_ENV_OLD'
+		trap_exit_push 'rm -f $KVM_UNIT_TESTS_ENV; initrd_cleanup'
 		[ -f "$KVM_UNIT_TESTS_ENV" ] && export KVM_UNIT_TESTS_ENV_OLD="$KVM_UNIT_TESTS_ENV"
 		export KVM_UNIT_TESTS_ENV=$(mktemp)
 		env_params
-- 
2.42.0

[kvm-unit-tests PATCH 4/9] migration: use a more robust way to wait for background job

[Nicholas Piggin]

Starting a pipeline of jobs in the background does not seem to have
a simple way to reliably find the pid of a particular process in the
pipeline (because not all processes are started when the shell
continues to execute).

The way PID of QEMU is derived can result in a failure waiting on a
PID that is not running. This is easier to hit with subsequent
multiple-migration support. Changing this to use $! by swapping the
pipeline for a fifo is more robust.

Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
---
 scripts/arch-run.bash | 12 +++++++++---
 1 file changed, 9 insertions(+), 3 deletions(-)

diff --git a/scripts/arch-run.bash b/scripts/arch-run.bash
index cc7da7c5..8fbfc50c 100644
--- a/scripts/arch-run.bash
+++ b/scripts/arch-run.bash
@@ -131,6 +131,7 @@ run_migration ()
 
 	migsock=$(mktemp -u -t mig-helper-socket.XXXXXXXXXX)
 	migout1=$(mktemp -t mig-helper-stdout1.XXXXXXXXXX)
+	migout_fifo1=$(mktemp -u -t mig-helper-fifo-stdout1.XXXXXXXXXX)
 	qmp1=$(mktemp -u -t mig-helper-qmp1.XXXXXXXXXX)
 	qmp2=$(mktemp -u -t mig-helper-qmp2.XXXXXXXXXX)
 	fifo=$(mktemp -u -t mig-helper-fifo.XXXXXXXXXX)
@@ -143,8 +144,9 @@ run_migration ()
 	qmpout2=/dev/null
 
 	eval "$@" -chardev socket,id=mon1,path=${qmp1},server=on,wait=off \
-		-mon chardev=mon1,mode=control | tee ${migout1} &
-	live_pid=`jobs -l %+ | grep "eval" | awk '{print$2}'`
+		-mon chardev=mon1,mode=control > ${migout_fifo1} &
+	live_pid=$!
+	cat ${migout_fifo1} | tee ${migout1} &
 
 	# We have to use cat to open the named FIFO, because named FIFO's, unlike
 	# pipes, will block on open() until the other end is also opened, and that
@@ -152,7 +154,7 @@ run_migration ()
 	mkfifo ${fifo}
 	eval "$@" -chardev socket,id=mon2,path=${qmp2},server=on,wait=off \
 		-mon chardev=mon2,mode=control -incoming unix:${migsock} < <(cat ${fifo}) &
-	incoming_pid=`jobs -l %+ | awk '{print$2}'`
+	incoming_pid=$!
 
 	# The test must prompt the user to migrate, so wait for the "migrate" keyword
 	while ! grep -q -i "Now migrate the VM" < ${migout1} ; do
@@ -166,6 +168,10 @@ run_migration ()
 		sleep 1
 	done
 
+	# Wait until the destination has created the incoming and qmp sockets
+	while ! [ -S ${migsock} ] ; do sleep 0.1 ; done
+	while ! [ -S ${qmp2} ] ; do sleep 0.1 ; done
+
 	qmp ${qmp1} '"migrate", "arguments": { "uri": "unix:'${migsock}'" }' > ${qmpout1}
 
 	# Wait for the migration to complete
-- 
2.42.0

[kvm-unit-tests PATCH 5/9] migration: Support multiple migrations

[Nicholas Piggin]

Support multiple migrations by flipping dest file/socket variables to
source after the migration is complete, ready to start again. A new
destination is created if the test outputs the migrate line again.
Test cases may now switch to calling migrate() one or more times.

Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
---
 lib/migrate.c         |  8 ++--
 lib/migrate.h         |  1 +
 scripts/arch-run.bash | 93 +++++++++++++++++++++++++++++++++++++------
 3 files changed, 85 insertions(+), 17 deletions(-)

diff --git a/lib/migrate.c b/lib/migrate.c
index 527e63ae..b7721659 100644
--- a/lib/migrate.c
+++ b/lib/migrate.c
@@ -8,8 +8,10 @@
 #include <libcflat.h>
 #include "migrate.h"
 
-/* static for now since we only support migrating exactly once per test. */
-static void migrate(void)
+/*
+ * Initiate migration and wait for it to complete.
+ */
+void migrate(void)
 {
 	puts("Now migrate the VM, then press a key to continue...\n");
 	(void)getchar();
@@ -19,8 +21,6 @@ static void migrate(void)
 /*
  * Initiate migration and wait for it to complete.
  * If this function is called more than once, it is a no-op.
- * Since migrate_cmd can only migrate exactly once this function can
- * simplify the control flow, especially when skipping tests.
  */
 void migrate_once(void)
 {
diff --git a/lib/migrate.h b/lib/migrate.h
index 3c94e6af..2af06a72 100644
--- a/lib/migrate.h
+++ b/lib/migrate.h
@@ -6,4 +6,5 @@
  * Author: Nico Boehr <nrb@linux.ibm.com>
  */
 
+void migrate(void);
 void migrate_once(void);
diff --git a/scripts/arch-run.bash b/scripts/arch-run.bash
index 8fbfc50c..1ea0f8bc 100644
--- a/scripts/arch-run.bash
+++ b/scripts/arch-run.bash
@@ -132,29 +132,76 @@ run_migration ()
 	migsock=$(mktemp -u -t mig-helper-socket.XXXXXXXXXX)
 	migout1=$(mktemp -t mig-helper-stdout1.XXXXXXXXXX)
 	migout_fifo1=$(mktemp -u -t mig-helper-fifo-stdout1.XXXXXXXXXX)
+	migout2=$(mktemp -t mig-helper-stdout2.XXXXXXXXXX)
+	migout_fifo2=$(mktemp -u -t mig-helper-fifo-stdout2.XXXXXXXXXX)
 	qmp1=$(mktemp -u -t mig-helper-qmp1.XXXXXXXXXX)
 	qmp2=$(mktemp -u -t mig-helper-qmp2.XXXXXXXXXX)
 	fifo=$(mktemp -u -t mig-helper-fifo.XXXXXXXXXX)
 
 	# race here between file creation and trap
 	trap "trap - TERM ; kill 0 ; exit 2" INT TERM
-	trap "rm -f ${migout1} ${migsock} ${qmp1} ${qmp2} ${fifo}" RETURN EXIT
+	trap "rm -f ${migout1} ${migout2} ${migout_fifo1} ${migout_fifo2} ${migsock} ${qmp1} ${qmp2} ${fifo}" RETURN EXIT
 
 	qmpout1=/dev/null
 	qmpout2=/dev/null
+	migcmdline=$@
 
-	eval "$@" -chardev socket,id=mon1,path=${qmp1},server=on,wait=off \
+	mkfifo ${migout_fifo1}
+	mkfifo ${migout_fifo2}
+
+	eval "$migcmdline" \
+		-chardev socket,id=mon1,path=${qmp1},server=on,wait=off \
 		-mon chardev=mon1,mode=control > ${migout_fifo1} &
 	live_pid=$!
 	cat ${migout_fifo1} | tee ${migout1} &
 
-	# We have to use cat to open the named FIFO, because named FIFO's, unlike
-	# pipes, will block on open() until the other end is also opened, and that
-	# totally breaks QEMU...
+	# The test must prompt the user to migrate, so wait for the "migrate"
+	# keyword
+	while ! grep -q -i "Now migrate the VM" < ${migout1} ; do
+		if ! ps -p ${live_pid} > /dev/null ; then
+			echo "ERROR: Test exit before migration point." >&2
+			qmp ${qmp1} '"quit"'> ${qmpout1} 2>/dev/null
+			return 3
+		fi
+		sleep 0.1
+	done
+
+	# This starts the first source QEMU in advance of the test reaching the
+	# migration point, since we expect at least one migration. Subsequent
+	# sources are started as the test hits migrate keywords.
+	do_migration || return $?
+
+	while ps -p ${live_pid} > /dev/null ; do
+		# Wait for EXIT or further migrations
+		if ! grep -q -i "Now migrate the VM" < ${migout1} ; then
+			sleep 0.1
+		else
+			do_migration || return $?
+		fi
+	done
+
+	wait ${live_pid}
+	ret=$?
+
+	while (( $(jobs -r | wc -l) > 0 )); do
+		sleep 0.1
+	done
+
+	return $ret
+}
+
+do_migration ()
+{
+	# We have to use cat to open the named FIFO, because named FIFO's,
+	# unlike pipes, will block on open() until the other end is also
+	# opened, and that totally breaks QEMU...
 	mkfifo ${fifo}
-	eval "$@" -chardev socket,id=mon2,path=${qmp2},server=on,wait=off \
-		-mon chardev=mon2,mode=control -incoming unix:${migsock} < <(cat ${fifo}) &
+	eval "$migcmdline" \
+		-chardev socket,id=mon2,path=${qmp2},server=on,wait=off \
+		-mon chardev=mon2,mode=control -incoming unix:${migsock} \
+		< <(cat ${fifo}) > ${migout_fifo2} &
 	incoming_pid=$!
+	cat ${migout_fifo2} | tee ${migout2} &
 
 	# The test must prompt the user to migrate, so wait for the "migrate" keyword
 	while ! grep -q -i "Now migrate the VM" < ${migout1} ; do
@@ -165,7 +212,7 @@ run_migration ()
 			qmp ${qmp2} '"quit"'> ${qmpout2} 2>/dev/null
 			return 3
 		fi
-		sleep 1
+		sleep 0.1
 	done
 
 	# Wait until the destination has created the incoming and qmp sockets
@@ -177,7 +224,7 @@ run_migration ()
 	# Wait for the migration to complete
 	migstatus=`qmp ${qmp1} '"query-migrate"' | grep return`
 	while ! grep -q '"completed"' <<<"$migstatus" ; do
-		sleep 1
+		sleep 0.1
 		if ! migstatus=`qmp ${qmp1} '"query-migrate"'`; then
 			echo "ERROR: Querying migration state failed." >&2
 			echo > ${fifo}
@@ -193,14 +240,34 @@ run_migration ()
 			return 2
 		fi
 	done
+
 	qmp ${qmp1} '"quit"'> ${qmpout1} 2>/dev/null
+
+	# keypress to dst so getchar completes and test continues
 	echo > ${fifo}
-	wait $incoming_pid
+	rm ${fifo}
+
+	# Ensure the incoming socket is removed, ready for next destination
+	if [ -S ${migsock} ] ; then
+		echo "ERROR: Incoming migration socket not removed after migration." >& 2
+		qmp ${qmp2} '"quit"'> ${qmpout2} 2>/dev/null
+		return 2
+	fi
+
+	wait ${live_pid}
 	ret=$?
 
-	while (( $(jobs -r | wc -l) > 0 )); do
-		sleep 0.5
-	done
+	# Now flip the variables because dest becomes source
+	live_pid=${incoming_pid}
+	tmp=${migout1}
+	migout1=${migout2}
+	migout2=${tmp}
+	tmp=${migout_fifo1}
+	migout_fifo1=${migout_fifo2}
+	migout_fifo2=${tmp}
+	tmp=${qmp1}
+	qmp1=${qmp2}
+	qmp2=${tmp}
 
 	return $ret
 }
-- 
2.42.0

[kvm-unit-tests PATCH 6/9] arch-run: rename migration variables

[Nicholas Piggin]

Using 1 and 2 for source and destination is confusing, particularly
now with multiple migrations that flip between them. Do a rename
pass to tidy things up.

Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
---
 scripts/arch-run.bash | 112 +++++++++++++++++++++---------------------
 1 file changed, 57 insertions(+), 55 deletions(-)

diff --git a/scripts/arch-run.bash b/scripts/arch-run.bash
index 1ea0f8bc..0feaa190 100644
--- a/scripts/arch-run.bash
+++ b/scripts/arch-run.bash
@@ -129,38 +129,39 @@ run_migration ()
 		return 77
 	fi
 
-	migsock=$(mktemp -u -t mig-helper-socket.XXXXXXXXXX)
-	migout1=$(mktemp -t mig-helper-stdout1.XXXXXXXXXX)
-	migout_fifo1=$(mktemp -u -t mig-helper-fifo-stdout1.XXXXXXXXXX)
-	migout2=$(mktemp -t mig-helper-stdout2.XXXXXXXXXX)
-	migout_fifo2=$(mktemp -u -t mig-helper-fifo-stdout2.XXXXXXXXXX)
-	qmp1=$(mktemp -u -t mig-helper-qmp1.XXXXXXXXXX)
-	qmp2=$(mktemp -u -t mig-helper-qmp2.XXXXXXXXXX)
-	fifo=$(mktemp -u -t mig-helper-fifo.XXXXXXXXXX)
+	dst_incoming=$(mktemp -u -t mig-helper-socket-incoming.XXXXXXXXXX)
+	src_out=$(mktemp -t mig-helper-stdout1.XXXXXXXXXX)
+	src_outfifo=$(mktemp -u -t mig-helper-fifo-stdout1.XXXXXXXXXX)
+	dst_out=$(mktemp -t mig-helper-stdout2.XXXXXXXXXX)
+	dst_outfifo=$(mktemp -u -t mig-helper-fifo-stdout2.XXXXXXXXXX)
+	src_qmp=$(mktemp -u -t mig-helper-qmp1.XXXXXXXXXX)
+	dst_qmp=$(mktemp -u -t mig-helper-qmp2.XXXXXXXXXX)
+	dst_infifo=$(mktemp -u -t mig-helper-fifo-stdin.XXXXXXXXXX)
 
 	# race here between file creation and trap
 	trap "trap - TERM ; kill 0 ; exit 2" INT TERM
-	trap "rm -f ${migout1} ${migout2} ${migout_fifo1} ${migout_fifo2} ${migsock} ${qmp1} ${qmp2} ${fifo}" RETURN EXIT
+	trap "rm -f ${src_out} ${dst_out} ${src_outfifo} ${dst_outfifo} ${dst_incoming} ${src_qmp} ${dst_qmp} ${dst_infifo}" RETURN EXIT
+
+	src_qmpout=/dev/null
+	dst_qmpout=/dev/null
 
-	qmpout1=/dev/null
-	qmpout2=/dev/null
 	migcmdline=$@
 
-	mkfifo ${migout_fifo1}
-	mkfifo ${migout_fifo2}
+	mkfifo ${src_outfifo}
+	mkfifo ${dst_outfifo}
 
 	eval "$migcmdline" \
-		-chardev socket,id=mon1,path=${qmp1},server=on,wait=off \
-		-mon chardev=mon1,mode=control > ${migout_fifo1} &
+		-chardev socket,id=mon,path=${src_qmp},server=on,wait=off \
+		-mon chardev=mon,mode=control > ${src_outfifo} &
 	live_pid=$!
-	cat ${migout_fifo1} | tee ${migout1} &
+	cat ${src_outfifo} | tee ${src_out} &
 
 	# The test must prompt the user to migrate, so wait for the "migrate"
 	# keyword
-	while ! grep -q -i "Now migrate the VM" < ${migout1} ; do
+	while ! grep -q -i "Now migrate the VM" < ${src_out} ; do
 		if ! ps -p ${live_pid} > /dev/null ; then
 			echo "ERROR: Test exit before migration point." >&2
-			qmp ${qmp1} '"quit"'> ${qmpout1} 2>/dev/null
+			qmp ${src_qmp} '"quit"'> ${src_qmpout} 2>/dev/null
 			return 3
 		fi
 		sleep 0.1
@@ -173,7 +174,7 @@ run_migration ()
 
 	while ps -p ${live_pid} > /dev/null ; do
 		# Wait for EXIT or further migrations
-		if ! grep -q -i "Now migrate the VM" < ${migout1} ; then
+		if ! grep -q -i "Now migrate the VM" < ${src_out} ; then
 			sleep 0.1
 		else
 			do_migration || return $?
@@ -195,79 +196,80 @@ do_migration ()
 	# We have to use cat to open the named FIFO, because named FIFO's,
 	# unlike pipes, will block on open() until the other end is also
 	# opened, and that totally breaks QEMU...
-	mkfifo ${fifo}
+	mkfifo ${dst_infifo}
 	eval "$migcmdline" \
-		-chardev socket,id=mon2,path=${qmp2},server=on,wait=off \
-		-mon chardev=mon2,mode=control -incoming unix:${migsock} \
-		< <(cat ${fifo}) > ${migout_fifo2} &
+		-chardev socket,id=mon,path=${dst_qmp},server=on,wait=off \
+		-mon chardev=mon,mode=control -incoming unix:${dst_incoming} \
+		< <(cat ${dst_infifo}) > ${dst_outfifo} &
 	incoming_pid=$!
-	cat ${migout_fifo2} | tee ${migout2} &
+	cat ${dst_outfifo} | tee ${dst_out} &
 
 	# The test must prompt the user to migrate, so wait for the "migrate" keyword
-	while ! grep -q -i "Now migrate the VM" < ${migout1} ; do
+	while ! grep -q -i "Now migrate the VM" < ${src_out} ; do
 		if ! ps -p ${live_pid} > /dev/null ; then
 			echo "ERROR: Test exit before migration point." >&2
-			echo > ${fifo}
-			qmp ${qmp1} '"quit"'> ${qmpout1} 2>/dev/null
-			qmp ${qmp2} '"quit"'> ${qmpout2} 2>/dev/null
+			echo > ${dst_infifo}
+			qmp ${src_qmp} '"quit"'> ${src_qmpout} 2>/dev/null
+			qmp ${dst_qmp} '"quit"'> ${dst_qmpout} 2>/dev/null
 			return 3
 		fi
 		sleep 0.1
 	done
 
 	# Wait until the destination has created the incoming and qmp sockets
-	while ! [ -S ${migsock} ] ; do sleep 0.1 ; done
-	while ! [ -S ${qmp2} ] ; do sleep 0.1 ; done
+	while ! [ -S ${dst_incoming} ] ; do sleep 0.1 ; done
+	while ! [ -S ${dst_qmp} ] ; do sleep 0.1 ; done
 
-	qmp ${qmp1} '"migrate", "arguments": { "uri": "unix:'${migsock}'" }' > ${qmpout1}
+	qmp ${src_qmp} '"migrate", "arguments": { "uri": "unix:'${dst_incoming}'" }' > ${src_qmpout}
 
 	# Wait for the migration to complete
-	migstatus=`qmp ${qmp1} '"query-migrate"' | grep return`
+	migstatus=`qmp ${src_qmp} '"query-migrate"' | grep return`
 	while ! grep -q '"completed"' <<<"$migstatus" ; do
 		sleep 0.1
-		if ! migstatus=`qmp ${qmp1} '"query-migrate"'`; then
+		if ! migstatus=`qmp ${src_qmp} '"query-migrate"'`; then
 			echo "ERROR: Querying migration state failed." >&2
-			echo > ${fifo}
-			qmp ${qmp2} '"quit"'> ${qmpout2} 2>/dev/null
+			echo > ${dst_infifo}
+			qmp ${dst_qmp} '"quit"'> ${dst_qmpout} 2>/dev/null
 			return 2
 		fi
 		migstatus=`grep return <<<"$migstatus"`
 		if grep -q '"failed"' <<<"$migstatus"; then
 			echo "ERROR: Migration failed." >&2
-			echo > ${fifo}
-			qmp ${qmp1} '"quit"'> ${qmpout1} 2>/dev/null
-			qmp ${qmp2} '"quit"'> ${qmpout2} 2>/dev/null
+			echo > ${dst_infifo}
+			qmp ${src_qmp} '"quit"'> ${src_qmpout} 2>/dev/null
+			qmp ${dst_qmp} '"quit"'> ${dst_qmpout} 2>/dev/null
 			return 2
 		fi
 	done
 
-	qmp ${qmp1} '"quit"'> ${qmpout1} 2>/dev/null
+	qmp ${src_qmp} '"quit"'> ${src_qmpout} 2>/dev/null
 
 	# keypress to dst so getchar completes and test continues
-	echo > ${fifo}
-	rm ${fifo}
+	echo > ${dst_infifo}
+	rm ${dst_infifo}
 
 	# Ensure the incoming socket is removed, ready for next destination
-	if [ -S ${migsock} ] ; then
+	if [ -S ${dst_incoming} ] ; then
 		echo "ERROR: Incoming migration socket not removed after migration." >& 2
-		qmp ${qmp2} '"quit"'> ${qmpout2} 2>/dev/null
+		qmp ${dst_qmp} '"quit"'> ${dst_qmpout} 2>/dev/null
 		return 2
 	fi
 
 	wait ${live_pid}
 	ret=$?
 
-	# Now flip the variables because dest becomes source
+	# Now flip the variables because destination machine becomes source
+	# for the next migration.
 	live_pid=${incoming_pid}
-	tmp=${migout1}
-	migout1=${migout2}
-	migout2=${tmp}
-	tmp=${migout_fifo1}
-	migout_fifo1=${migout_fifo2}
-	migout_fifo2=${tmp}
-	tmp=${qmp1}
-	qmp1=${qmp2}
-	qmp2=${tmp}
+	tmp=${src_out}
+	src_out=${dst_out}
+	dst_out=${tmp}
+	tmp=${src_outfifo}
+	src_outfifo=${dst_outfifo}
+	dst_outfifo=${tmp}
+	tmp=${src_qmp}
+	src_qmp=${dst_qmp}
+	dst_qmp=${tmp}
 
 	return $ret
 }
@@ -290,8 +292,8 @@ run_panic ()
 	trap "rm -f ${qmp}" RETURN EXIT
 
 	# start VM stopped so we don't miss any events
-	eval "$@" -chardev socket,id=mon1,path=${qmp},server=on,wait=off \
-		-mon chardev=mon1,mode=control -S &
+	eval "$@" -chardev socket,id=mon,path=${qmp},server=on,wait=off \
+		-mon chardev=mon,mode=control -S &
 
 	panic_event_count=$(qmp_events ${qmp} | jq -c 'select(.event == "GUEST_PANICKED")' | wc -l)
 	if [ "$panic_event_count" -lt 1 ]; then
-- 
2.42.0

[kvm-unit-tests PATCH 7/9] migration: Add quiet migration support

[Nicholas Piggin]

Console output required to support migration becomes quite noisy
when doing lots of migrations. Provide a migrate_quiet() call that
suppresses console output and doesn't log.

Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
---
 lib/migrate.c         | 12 ++++++++++++
 lib/migrate.h         |  1 +
 scripts/arch-run.bash |  4 ++--
 3 files changed, 15 insertions(+), 2 deletions(-)

diff --git a/lib/migrate.c b/lib/migrate.c
index b7721659..4e0ab516 100644
--- a/lib/migrate.c
+++ b/lib/migrate.c
@@ -18,6 +18,18 @@ void migrate(void)
 	report_info("Migration complete");
 }
 
+/*
+ * Like migrate() but supporess output and logs, useful for intensive
+ * migration stress testing without polluting logs. Test cases should
+ * provide relevant information about migration in failure reports.
+ */
+void migrate_quiet(void)
+{
+	puts("Now migrate the VM (quiet)\n");
+	(void)getchar();
+}
+
+
 /*
  * Initiate migration and wait for it to complete.
  * If this function is called more than once, it is a no-op.
diff --git a/lib/migrate.h b/lib/migrate.h
index 2af06a72..95b9102b 100644
--- a/lib/migrate.h
+++ b/lib/migrate.h
@@ -7,4 +7,5 @@
  */
 
 void migrate(void);
+void migrate_quiet(void);
 void migrate_once(void);
diff --git a/scripts/arch-run.bash b/scripts/arch-run.bash
index 0feaa190..5810f9a1 100644
--- a/scripts/arch-run.bash
+++ b/scripts/arch-run.bash
@@ -154,7 +154,7 @@ run_migration ()
 		-chardev socket,id=mon,path=${src_qmp},server=on,wait=off \
 		-mon chardev=mon,mode=control > ${src_outfifo} &
 	live_pid=$!
-	cat ${src_outfifo} | tee ${src_out} &
+	cat ${src_outfifo} | tee ${src_out} | grep -v "Now migrate the VM (quiet)" &
 
 	# The test must prompt the user to migrate, so wait for the "migrate"
 	# keyword
@@ -202,7 +202,7 @@ do_migration ()
 		-mon chardev=mon,mode=control -incoming unix:${dst_incoming} \
 		< <(cat ${dst_infifo}) > ${dst_outfifo} &
 	incoming_pid=$!
-	cat ${dst_outfifo} | tee ${dst_out} &
+	cat ${dst_outfifo} | tee ${dst_out} | grep -v "Now migrate the VM (quiet)" &
 
 	# The test must prompt the user to migrate, so wait for the "migrate" keyword
 	while ! grep -q -i "Now migrate the VM" < ${src_out} ; do
-- 
2.42.0

[kvm-unit-tests PATCH 8/9] Add common/ directory for architecture-independent tests

[Nicholas Piggin]

x86/sieve.c is used by s390x and arm via symbolic link. Make a new
directory common/ for architecture-independent tests and move
sieve.c here.

Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
---
 arm/sieve.c    |  2 +-
 common/sieve.c | 51 +++++++++++++++++++++++++++++++++++++++++++++++++
 s390x/sieve.c  |  2 +-
 x86/sieve.c    | 52 +-------------------------------------------------
 4 files changed, 54 insertions(+), 53 deletions(-)
 create mode 100644 common/sieve.c
 mode change 100644 => 120000 x86/sieve.c

diff --git a/arm/sieve.c b/arm/sieve.c
index 8f14a5c3..fe299f30 120000
--- a/arm/sieve.c
+++ b/arm/sieve.c
@@ -1 +1 @@
-../x86/sieve.c
\ No newline at end of file
+../common/sieve.c
\ No newline at end of file
diff --git a/common/sieve.c b/common/sieve.c
new file mode 100644
index 00000000..8150f2d9
--- /dev/null
+++ b/common/sieve.c
@@ -0,0 +1,51 @@
+#include "alloc.h"
+#include "libcflat.h"
+
+static int sieve(char* data, int size)
+{
+    int i, j, r = 0;
+
+    for (i = 0; i < size; ++i)
+	data[i] = 1;
+
+    data[0] = data[1] = 0;
+
+    for (i = 2; i < size; ++i)
+	if (data[i]) {
+	    ++r;
+	    for (j = i*2; j < size; j += i)
+		data[j] = 0;
+	}
+    return r;
+}
+
+static void test_sieve(const char *msg, char *data, int size)
+{
+    int r;
+
+    printf("%s:", msg);
+    r = sieve(data, size);
+    printf("%d out of %d\n", r, size);
+}
+
+#define STATIC_SIZE 1000000
+#define VSIZE 100000000
+char static_data[STATIC_SIZE];
+
+int main(void)
+{
+    void *v;
+    int i;
+
+    printf("starting sieve\n");
+    test_sieve("static", static_data, STATIC_SIZE);
+    setup_vm();
+    test_sieve("mapped", static_data, STATIC_SIZE);
+    for (i = 0; i < 3; ++i) {
+	v = malloc(VSIZE);
+	test_sieve("virtual", v, VSIZE);
+	free(v);
+    }
+
+    return 0;
+}
diff --git a/s390x/sieve.c b/s390x/sieve.c
index 8f14a5c3..fe299f30 120000
--- a/s390x/sieve.c
+++ b/s390x/sieve.c
@@ -1 +1 @@
-../x86/sieve.c
\ No newline at end of file
+../common/sieve.c
\ No newline at end of file
diff --git a/x86/sieve.c b/x86/sieve.c
deleted file mode 100644
index 8150f2d9..00000000
--- a/x86/sieve.c
+++ /dev/null
@@ -1,51 +0,0 @@
-#include "alloc.h"
-#include "libcflat.h"
-
-static int sieve(char* data, int size)
-{
-    int i, j, r = 0;
-
-    for (i = 0; i < size; ++i)
-	data[i] = 1;
-
-    data[0] = data[1] = 0;
-
-    for (i = 2; i < size; ++i)
-	if (data[i]) {
-	    ++r;
-	    for (j = i*2; j < size; j += i)
-		data[j] = 0;
-	}
-    return r;
-}
-
-static void test_sieve(const char *msg, char *data, int size)
-{
-    int r;
-
-    printf("%s:", msg);
-    r = sieve(data, size);
-    printf("%d out of %d\n", r, size);
-}
-
-#define STATIC_SIZE 1000000
-#define VSIZE 100000000
-char static_data[STATIC_SIZE];
-
-int main(void)
-{
-    void *v;
-    int i;
-
-    printf("starting sieve\n");
-    test_sieve("static", static_data, STATIC_SIZE);
-    setup_vm();
-    test_sieve("mapped", static_data, STATIC_SIZE);
-    for (i = 0; i < 3; ++i) {
-	v = malloc(VSIZE);
-	test_sieve("virtual", v, VSIZE);
-	free(v);
-    }
-
-    return 0;
-}
diff --git a/x86/sieve.c b/x86/sieve.c
new file mode 120000
index 00000000..fe299f30
--- /dev/null
+++ b/x86/sieve.c
@@ -0,0 +1 @@
+../common/sieve.c
\ No newline at end of file
-- 
2.42.0

[kvm-unit-tests PATCH 9/9] migration: add a migration selftest

[Nicholas Piggin]

Add a selftest for migration support in  guest library and test harness
code. It performs migrations a tight loop to irritate races, and has
flushed out several bugs in developing in the complicated test harness
migration code already.

Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
---
 arm/Makefile.common         |  1 +
 arm/unittests.cfg           |  6 ++++++
 common/selftest-migration.c | 34 ++++++++++++++++++++++++++++++++++
 powerpc/Makefile.common     |  1 +
 powerpc/unittests.cfg       |  4 ++++
 s390x/Makefile              |  1 +
 s390x/unittests.cfg         |  4 ++++
 7 files changed, 51 insertions(+)
 create mode 100644 common/selftest-migration.c

diff --git a/arm/Makefile.common b/arm/Makefile.common
index 5214c8ac..d769ae52 100644
--- a/arm/Makefile.common
+++ b/arm/Makefile.common
@@ -5,6 +5,7 @@
 #
 
 tests-common  = $(TEST_DIR)/selftest.$(exe)
+tests-common += $(TEST_DIR)/selftest-migration.$(exe)
 tests-common += $(TEST_DIR)/spinlock-test.$(exe)
 tests-common += $(TEST_DIR)/pci-test.$(exe)
 tests-common += $(TEST_DIR)/pmu.$(exe)
diff --git a/arm/unittests.cfg b/arm/unittests.cfg
index fe601cbb..1ffd9a82 100644
--- a/arm/unittests.cfg
+++ b/arm/unittests.cfg
@@ -55,6 +55,12 @@ smp = $MAX_SMP
 extra_params = -append 'smp'
 groups = selftest
 
+# Test migration
+[selftest-migration]
+file = selftest-migration.flat
+groups = selftest migration
+
+arch = arm64
 # Test PCI emulation
 [pci-test]
 file = pci-test.flat
diff --git a/common/selftest-migration.c b/common/selftest-migration.c
new file mode 100644
index 00000000..f70c505f
--- /dev/null
+++ b/common/selftest-migration.c
@@ -0,0 +1,34 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * Machine independent migration tests
+ *
+ * This is just a very simple test that is intended to stress the migration
+ * support in the test harness. This could be expanded to test more guest
+ * library code, but architecture-specific tests should be used to test
+ * migration of tricky machine state.
+ */
+#include <libcflat.h>
+#include <migrate.h>
+
+#if defined(__arm__) || defined(__aarch64__)
+/* arm can only call getchar 15 times */
+#define NR_MIGRATIONS 15
+#else
+#define NR_MIGRATIONS 100
+#endif
+
+int main(int argc, char **argv)
+{
+	int i = 0;
+
+	report_prefix_push("migration");
+
+	for (i = 0; i < NR_MIGRATIONS; i++)
+		migrate_quiet();
+
+	report(true, "simple harness stress test");
+
+	report_prefix_pop();
+
+	return report_summary();
+}
diff --git a/powerpc/Makefile.common b/powerpc/Makefile.common
index f8f47490..0d1a65f7 100644
--- a/powerpc/Makefile.common
+++ b/powerpc/Makefile.common
@@ -6,6 +6,7 @@
 
 tests-common = \
 	$(TEST_DIR)/selftest.elf \
+	$(TEST_DIR)/selftest-migration.elf \
 	$(TEST_DIR)/spapr_hcall.elf \
 	$(TEST_DIR)/rtas.elf \
 	$(TEST_DIR)/emulator.elf \
diff --git a/powerpc/unittests.cfg b/powerpc/unittests.cfg
index e71140aa..7ce57de0 100644
--- a/powerpc/unittests.cfg
+++ b/powerpc/unittests.cfg
@@ -36,6 +36,10 @@ smp = 2
 extra_params = -m 256 -append 'setup smp=2 mem=256'
 groups = selftest
 
+[selftest-migration]
+file = selftest-migration.elf
+groups = selftest migration
+
 [spapr_hcall]
 file = spapr_hcall.elf
 
diff --git a/s390x/Makefile b/s390x/Makefile
index 95ef9533..505e5d32 100644
--- a/s390x/Makefile
+++ b/s390x/Makefile
@@ -1,4 +1,5 @@
 tests = $(TEST_DIR)/selftest.elf
+tests += $(TEST_DIR)/selftest-migration.elf
 tests += $(TEST_DIR)/intercept.elf
 tests += $(TEST_DIR)/emulator.elf
 tests += $(TEST_DIR)/sieve.elf
diff --git a/s390x/unittests.cfg b/s390x/unittests.cfg
index f5024b6e..a7ad522c 100644
--- a/s390x/unittests.cfg
+++ b/s390x/unittests.cfg
@@ -24,6 +24,10 @@ groups = selftest
 # please keep the kernel cmdline in sync with $(TEST_DIR)/selftest.parmfile
 extra_params = -append 'test 123'
 
+[selftest-migration]
+file = selftest-migration.elf
+groups = selftest migration
+
 [intercept]
 file = intercept.elf
 
-- 
2.42.0

Re: [kvm-unit-tests PATCH 1/9] s390x: clean lib/auxinfo.o

[Claudio Imbrenda]

On Fri, 22 Dec 2023 23:50:40 +1000
Nicholas Piggin <npiggin@gmail.com> wrote:

> Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
> ---
>  s390x/Makefile | 2 +-
>  1 file changed, 1 insertion(+), 1 deletion(-)
> 
> diff --git a/s390x/Makefile b/s390x/Makefile
> index f79fd009..95ef9533 100644
> --- a/s390x/Makefile
> +++ b/s390x/Makefile
> @@ -227,7 +227,7 @@ $(snippet_asmlib): $$(patsubst %.o,%.S,$$@) $(asm-offsets)
>  
>  
>  arch_clean: asm_offsets_clean
> -	$(RM) $(TEST_DIR)/*.{o,elf,bin,lds} $(SNIPPET_DIR)/*/*.{o,elf,*bin,*obj,hdr,lds} $(SNIPPET_DIR)/asm/.*.d $(TEST_DIR)/.*.d lib/s390x/.*.d $(comm-key)
> +	$(RM) $(TEST_DIR)/*.{o,elf,bin,lds} $(SNIPPET_DIR)/*/*.{o,elf,*bin,*obj,hdr,lds} $(SNIPPET_DIR)/asm/.*.d $(TEST_DIR)/.*.d lib/s390x/.*.d lib/auxinfo.o $(comm-key)

it seems other architectures don't need to do the cleanp? what are we
doing wrong?

>  
>  generated-files = $(asm-offsets)
>  $(tests:.elf=.o) $(asmlib) $(cflatobjs): $(generated-files)

Re: [kvm-unit-tests PATCH 9/9] migration: add a migration selftest

[Claudio Imbrenda]

On Fri, 22 Dec 2023 23:50:48 +1000
Nicholas Piggin <npiggin@gmail.com> wrote:

> Add a selftest for migration support in  guest library and test harness
> code. It performs migrations a tight loop to irritate races, and has
> flushed out several bugs in developing in the complicated test harness
> migration code already.
> 
> Signed-off-by: Nicholas Piggin <npiggin@gmail.com>

for s390x:

Acked-by: Claudio Imbrenda <imbrenda@linux.ibm.com>

[...]

Re: [kvm-unit-tests PATCH 1/9] s390x: clean lib/auxinfo.o

[Nicholas Piggin]

On Sat Dec 23, 2023 at 1:04 AM AEST, Claudio Imbrenda wrote:
> On Fri, 22 Dec 2023 23:50:40 +1000
> Nicholas Piggin <npiggin@gmail.com> wrote:
>
> > Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
> > ---
> >  s390x/Makefile | 2 +-
> >  1 file changed, 1 insertion(+), 1 deletion(-)
> > 
> > diff --git a/s390x/Makefile b/s390x/Makefile
> > index f79fd009..95ef9533 100644
> > --- a/s390x/Makefile
> > +++ b/s390x/Makefile
> > @@ -227,7 +227,7 @@ $(snippet_asmlib): $$(patsubst %.o,%.S,$$@) $(asm-offsets)
> >  
> >  
> >  arch_clean: asm_offsets_clean
> > -	$(RM) $(TEST_DIR)/*.{o,elf,bin,lds} $(SNIPPET_DIR)/*/*.{o,elf,*bin,*obj,hdr,lds} $(SNIPPET_DIR)/asm/.*.d $(TEST_DIR)/.*.d lib/s390x/.*.d $(comm-key)
> > +	$(RM) $(TEST_DIR)/*.{o,elf,bin,lds} $(SNIPPET_DIR)/*/*.{o,elf,*bin,*obj,hdr,lds} $(SNIPPET_DIR)/asm/.*.d $(TEST_DIR)/.*.d lib/s390x/.*.d lib/auxinfo.o $(comm-key)
>
> it seems other architectures don't need to do the cleanp? what are we
> doing wrong?

x86 does clean it via cflatobjs. arm and powerpc never build the .o
AFAIKS.

Thanks,
Nick