Re: [PATCH v2 1/4] PCI/AER: Store more information in aer_err_info

[Bjorn Helgaas <helgaas@kernel.org>]

On Thu, Jan 25, 2024 at 02:27:59PM +0800, Wang, Qingshun wrote:
> When Advisory Non-Fatal errors are raised, both correctable and
> uncorrectable error statuses will be set. The current kernel code cannot
> store both statuses at the same time, thus failing to handle ANFE properly.
> In addition, to avoid clearing UEs that are not ANFE by accident, UE
> severity and Device Status also need to be recorded: any fatal UE cannot
> be ANFE, and if Fatal/Non-Fatal Error Detected is set in Device Status, do
> not take any assumption and let UE handler to clear UE status.
> 
> Store status and mask of both correctable and uncorrectable errors in
> aer_err_info. The severity of UEs and the values of the Device Status
> register are also recorded, which will be used to determine UEs that should
> be handled by the ANFE handler. Refactor the rest of the code to use
> cor/uncor_status and cor/uncor_mask fields instead of status and mask
> fields.

There's a lot going on in this patch.  Could it possibly be split up a
bit, e.g., first tease apart aer_err_info.status/.mask into
.cor_status/mask and .uncor_status/mask, then add .uncor_severity,
then add the device_status bit separately?  If it could be split up, I
think the ANFE case would be easier to see.

Thanks a lot for working on this area!

Bjorn