[PATCH 1/1] dt-bindings: soc: fsl: Convert q(b)man-* to yaml format

[PATCH 1/1] dt-bindings: soc: fsl: Convert q(b)man-* to yaml format

[Frank Li]

Convert qman, bman, qman-portals, bman-portals to yaml format.

Additional Chang for fsl,q(b)man-portal:
- Only keep one example.
- Add fsl,qman-channel-id property.
- Use interrupt type macro.
- Remove top level qman-portals@ff4200000 at example.

Additional change for fsl,q(b)man:
- Fixed example error.
- Remove redundent part, only keep fsl,qman node.
- Change memory-regions to memory-region.
- fsl,q(b)man-portals is not required property

Additional change for fsl,qman-fqd.yaml:
- Fixed example error.
- Only keep one example.
- Ref to reserve-memory.yaml
- Merge fsl,bman reserver memory part

Signed-off-by: Frank Li <Frank.Li@nxp.com>
---
 .../bindings/soc/fsl/bman-portals.txt         |  56 ------
 .../devicetree/bindings/soc/fsl/bman.txt      | 137 -------------
 .../bindings/soc/fsl/fsl,bman-portal.yaml     |  51 +++++
 .../devicetree/bindings/soc/fsl/fsl,bman.yaml |  83 ++++++++
 .../bindings/soc/fsl/fsl,qman-fqd.yaml        |  68 +++++++
 .../bindings/soc/fsl/fsl,qman-portal.yaml     | 110 +++++++++++
 .../devicetree/bindings/soc/fsl/fsl,qman.yaml |  97 +++++++++
 .../bindings/soc/fsl/qman-portals.txt         | 134 -------------
 .../devicetree/bindings/soc/fsl/qman.txt      | 187 ------------------
 9 files changed, 409 insertions(+), 514 deletions(-)
 delete mode 100644 Documentation/devicetree/bindings/soc/fsl/bman-portals.txt
 delete mode 100644 Documentation/devicetree/bindings/soc/fsl/bman.txt
 create mode 100644 Documentation/devicetree/bindings/soc/fsl/fsl,bman-portal.yaml
 create mode 100644 Documentation/devicetree/bindings/soc/fsl/fsl,bman.yaml
 create mode 100644 Documentation/devicetree/bindings/soc/fsl/fsl,qman-fqd.yaml
 create mode 100644 Documentation/devicetree/bindings/soc/fsl/fsl,qman-portal.yaml
 create mode 100644 Documentation/devicetree/bindings/soc/fsl/fsl,qman.yaml
 delete mode 100644 Documentation/devicetree/bindings/soc/fsl/qman-portals.txt
 delete mode 100644 Documentation/devicetree/bindings/soc/fsl/qman.txt

diff --git a/Documentation/devicetree/bindings/soc/fsl/bman-portals.txt b/Documentation/devicetree/bindings/soc/fsl/bman-portals.txt
deleted file mode 100644
index 2a00e14e11e02..0000000000000
--- a/Documentation/devicetree/bindings/soc/fsl/bman-portals.txt
+++ /dev/null
@@ -1,56 +0,0 @@
-QorIQ DPAA Buffer Manager Portals Device Tree Binding
-
-Copyright (C) 2008 - 2014 Freescale Semiconductor Inc.
-
-CONTENTS
-
-	- BMan Portal
-	- Example
-
-BMan Portal Node
-
-Portals are memory mapped interfaces to BMan that allow low-latency, lock-less
-interaction by software running on processor cores, accelerators and network
-interfaces with the BMan
-
-PROPERTIES
-
-- compatible
-	Usage:		Required
-	Value type:	<stringlist>
-	Definition:	Must include "fsl,bman-portal-<hardware revision>"
-			May include "fsl,<SoC>-bman-portal" or "fsl,bman-portal"
-
-- reg
-	Usage:		Required
-	Value type:	<prop-encoded-array>
-	Definition:	Two regions. The first is the cache-enabled region of
-			the portal. The second is the cache-inhibited region of
-			the portal
-
-- interrupts
-	Usage:		Required
-	Value type:	<prop-encoded-array>
-	Definition:	Standard property
-
-EXAMPLE
-
-The example below shows a (P4080) BMan portals container/bus node with two portals
-
-	bman-portals@ff4000000 {
-		#address-cells = <1>;
-		#size-cells = <1>;
-		compatible = "simple-bus";
-		ranges = <0 0xf 0xf4000000 0x200000>;
-
-		bman-portal@0 {
-			compatible = "fsl,bman-portal-1.0.0", "fsl,bman-portal";
-			reg = <0x0 0x4000>, <0x100000 0x1000>;
-			interrupts = <105 2 0 0>;
-		};
-		bman-portal@4000 {
-			compatible = "fsl,bman-portal-1.0.0", "fsl,bman-portal";
-			reg = <0x4000 0x4000>, <0x101000 0x1000>;
-			interrupts = <107 2 0 0>;
-		};
-	};
diff --git a/Documentation/devicetree/bindings/soc/fsl/bman.txt b/Documentation/devicetree/bindings/soc/fsl/bman.txt
deleted file mode 100644
index 48eed140765b0..0000000000000
--- a/Documentation/devicetree/bindings/soc/fsl/bman.txt
+++ /dev/null
@@ -1,137 +0,0 @@
-QorIQ DPAA Buffer Manager Device Tree Bindings
-
-Copyright (C) 2008 - 2014 Freescale Semiconductor Inc.
-
-CONTENTS
-
-	- BMan Node
-	- BMan Private Memory Node
-	- Example
-
-BMan Node
-
-The Buffer Manager is part of the Data-Path Acceleration Architecture (DPAA).
-BMan supports hardware allocation and deallocation of buffers belonging to pools
-originally created by software with configurable depletion thresholds. This
-binding covers the CCSR space programming model
-
-PROPERTIES
-
-- compatible
-	Usage:		Required
-	Value type:	<stringlist>
-	Definition:	Must include "fsl,bman"
-			May include "fsl,<SoC>-bman"
-
-- reg
-	Usage:		Required
-	Value type:	<prop-encoded-array>
-	Definition:	Registers region within the CCSR address space
-
-The BMan revision information is located in the BMAN_IP_REV_1/2 registers which
-are located at offsets 0xbf8 and 0xbfc
-
-- interrupts
-	Usage:		Required
-	Value type:	<prop-encoded-array>
-	Definition:	Standard property. The error interrupt
-
-- fsl,bman-portals
-	Usage:		Required
-	Value type:	<phandle>
-	Definition:	Phandle to this BMan instance's portals
-
-- fsl,liodn
-	Usage:		See pamu.txt
-	Value type:	<prop-encoded-array>
-	Definition:	PAMU property used for static LIODN assignment
-
-- fsl,iommu-parent
-	Usage:		See pamu.txt
-	Value type:	<phandle>
-	Definition:	PAMU property used for dynamic LIODN assignment
-
-	For additional details about the PAMU/LIODN binding(s) see pamu.txt
-
-Devices connected to a BMan instance via Direct Connect Portals (DCP) must link
-to the respective BMan instance
-
-- fsl,bman
-	Usage:		Required
-	Value type:	<prop-encoded-array>
-	Description:	List of phandle and DCP index pairs, to the BMan instance
-			to which this device is connected via the DCP
-
-BMan Private Memory Node
-
-BMan requires a contiguous range of physical memory used for the backing store
-for BMan Free Buffer Proxy Records (FBPR). This memory is reserved/allocated as
-a node under the /reserved-memory node.
-
-The BMan FBPR memory node must be named "bman-fbpr"
-
-PROPERTIES
-
-- compatible
-	Usage:		required
-	Value type:	<stringlist>
-	Definition:	PPC platforms: Must include "fsl,bman-fbpr"
-			ARM platforms: Must include "shared-dma-pool"
-				       as well as the "no-map" property
-
-The following constraints are relevant to the FBPR private memory:
-	- The size must be 2^(size + 1), with size = 11..33. That is 4 KiB to
-	  16 GiB
-	- The alignment must be a muliptle of the memory size
-
-The size of the FBPR must be chosen by observing the hardware features configured
-via the Reset Configuration Word (RCW) and that are relevant to a specific board
-(e.g. number of MAC(s) pinned-out, number of offline/host command FMan ports,
-etc.). The size configured in the DT must reflect the hardware capabilities and
-not the specific needs of an application
-
-For additional details about reserved memory regions see reserved-memory.txt
-
-EXAMPLE
-
-The example below shows a BMan FBPR dynamic allocation memory node
-
-	reserved-memory {
-		#address-cells = <2>;
-		#size-cells = <2>;
-		ranges;
-
-		bman_fbpr: bman-fbpr {
-			compatible = "shared-mem-pool";
-			size = <0 0x1000000>;
-			alignment = <0 0x1000000>;
-			no-map;
-		};
-	};
-
-The example below shows a (P4080) BMan CCSR-space node
-
-	bportals: bman-portals@ff4000000 {
-		...
-	};
-
-	crypto@300000 {
-		...
-		fsl,bman = <&bman, 2>;
-		...
-	};
-
-	bman: bman@31a000 {
-		compatible = "fsl,bman";
-		reg = <0x31a000 0x1000>;
-		interrupts = <16 2 1 2>;
-		fsl,liodn = <0x17>;
-		fsl,bman-portals = <&bportals>;
-		memory-region = <&bman_fbpr>;
-	};
-
-	fman@400000 {
-		...
-		fsl,bman = <&bman, 0>;
-		...
-	};
diff --git a/Documentation/devicetree/bindings/soc/fsl/fsl,bman-portal.yaml b/Documentation/devicetree/bindings/soc/fsl/fsl,bman-portal.yaml
new file mode 100644
index 0000000000000..06b51f049098f
--- /dev/null
+++ b/Documentation/devicetree/bindings/soc/fsl/fsl,bman-portal.yaml
@@ -0,0 +1,51 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/soc/fsl/fsl,bman-portal.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: QorIQ DPAA Queue Manager Portals
+
+maintainers:
+  - Frank Li <Frank.Li@nxp.com>
+
+description:
+  QorIQ DPAA Buffer Manager Portal
+
+  Portals are memory mapped interfaces to BMan that allow low-latency, lock-less
+  interaction by software running on processor cores, accelerators and network
+  interfaces with the BMan
+
+properties:
+  compatible:
+    oneOf:
+      - const: fsl,bman-portal
+      - items:
+          - enum:
+              - fsl,ls1043a-bmap-portal
+              - fsl,ls1046a-bmap-portal
+          - const: fsl,bman-portal
+  reg:
+    items:
+      - description: the cache-enabled region of the portal
+      - description: the cache-inhibited region of the porta
+
+  interrupts:
+    maxItems: 1
+
+required:
+  - compatible
+  - reg
+  - interrupts
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/interrupt-controller/irq.h>
+
+    bman-portal@0 {
+        compatible = "fsl,bman-portal-1.0.0", "fsl,bman-portal";
+        reg = <0x0 0x4000>, <0x100000 0x1000>;
+        interrupts = <105 IRQ_TYPE_EDGE_FALLING 0 0>;
+    };
diff --git a/Documentation/devicetree/bindings/soc/fsl/fsl,bman.yaml b/Documentation/devicetree/bindings/soc/fsl/fsl,bman.yaml
new file mode 100644
index 0000000000000..e6b3d489ce5cc
--- /dev/null
+++ b/Documentation/devicetree/bindings/soc/fsl/fsl,bman.yaml
@@ -0,0 +1,83 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/soc/fsl/fsl,bman.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: QorIQ DPAA Buffer Manager
+
+maintainers:
+  - Frank Li <Frank.Li@nxp.com>
+
+description:
+  The Buffer Manager is part of the Data-Path Acceleration Architecture (DPAA).
+  BMan supports hardware allocation and deallocation of buffers belonging to pools
+  originally created by software with configurable depletion thresholds. This
+  binding covers the CCSR space programming model
+
+properties:
+  compatible:
+    oneOf:
+      - const: fsl,bman
+      - items:
+          - enum:
+              - fsl,ls1043a-bman
+              - fsl,ls1046a-bman
+          - const: fsl,bman
+
+  reg:
+    items:
+      - description:
+          Registers region within the CCSR address space
+
+          The BMan revision information is located in the BMAN_IP_REV_1/2 registers which
+          are located at offsets 0xbf8 and 0xbfc
+
+  interrupts:
+    items:
+      - description: The error interrupt
+
+  memory-region:
+    $ref: /schemas/types.yaml#/definitions/phandle-array
+    description:
+      List of phandles referencing the BMan private memory
+      nodes (described below). The bman-fqd node must be
+      first followed by bman-pfdr node. Only used on ARM
+
+      Devices connected to a BMan instance via Direct Connect Portals (DCP) must link
+      to the respective BMan instance
+
+  fsl,bman-portals:
+    $ref: /schemas/types.yaml#/definitions/phandle
+    description: ref fsl,bman-port.yaml
+
+  fsl,liodn:
+    $ref: /schemas/types.yaml#/definitions/uint32-array
+    description:
+      See pamu.txt, PAMU property used for static LIODN assignment
+
+  fsl,iommu-parent:
+    $ref: /schemas/types.yaml#/definitions/phandle
+    description:
+      See pamu.txt, PAMU property used for dynamic LIODN assignment
+
+required:
+  - compatible
+  - reg
+  - interrupts
+  - fsl,bman-portals
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/interrupt-controller/irq.h>
+
+    bman@31a000 {
+        compatible = "fsl,bman";
+        reg = <0x31a000 0x1000>;
+        interrupts = <16 IRQ_TYPE_EDGE_FALLING 1 2>;
+        fsl,liodn = <0x17>;
+        fsl,bman-portals = <&bportals>;
+        memory-region = <&bman_fbpr>;
+    };
diff --git a/Documentation/devicetree/bindings/soc/fsl/fsl,qman-fqd.yaml b/Documentation/devicetree/bindings/soc/fsl/fsl,qman-fqd.yaml
new file mode 100644
index 0000000000000..f7af14dc7deb6
--- /dev/null
+++ b/Documentation/devicetree/bindings/soc/fsl/fsl,qman-fqd.yaml
@@ -0,0 +1,68 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/soc/fsl/fsl,qman-fqd.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: QMan Private Memory Nodes
+
+maintainers:
+  - Frank Li <Frank.Li@nxp.com>
+
+description: |
+  QMan requires two contiguous range of physical memory used for the backing store
+  for QMan Frame Queue Descriptor (FQD) and Packed Frame Descriptor Record (PFDR).
+  This memory is reserved/allocated as a node under the /reserved-memory node.
+
+  BMan requires a contiguous range of physical memory used for the backing store
+  for BMan Free Buffer Proxy Records (FBPR). This memory is reserved/allocated as
+  a node under the /reserved-memory node.
+
+  The QMan FQD memory node must be named "qman-fqd"
+  The QMan PFDR memory node must be named "qman-pfdr"
+  The BMan FBPR memory node must be named "bman-fbpr"
+
+  The following constraints are relevant to the FQD and PFDR private memory:
+    - The size must be 2^(size + 1), with size = 11..29. That is 4 KiB to
+      1 GiB
+    - The alignment must be a muliptle of the memory size
+
+  The size of the FQD and PFDP must be chosen by observing the hardware features
+  configured via the Reset Configuration Word (RCW) and that are relevant to a
+  specific board (e.g. number of MAC(s) pinned-out, number of offline/host command
+  FMan ports, etc.). The size configured in the DT must reflect the hardware
+  capabilities and not the specific needs of an application
+
+  For additional details about reserved memory regions see reserved-memory.txt
+
+properties:
+  $nodename:
+    pattern: '^(qman-fqd|qman-pfdr|bman-fbpr|)+$'
+
+  compatible:
+    enum:
+      - fsl,qman-fqd
+      - fsl,qman-pfdr
+      - fsl,bman-fbpr
+
+required:
+  - compatible
+
+allOf:
+  - $ref: reserved-memory.yaml
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    reserved-memory {
+        #address-cells = <2>;
+        #size-cells = <2>;
+
+        qman-fqd {
+            compatible = "shared-dma-pool";
+            size = <0 0x400000>;
+            alignment = <0 0x400000>;
+            no-map;
+        };
+    };
diff --git a/Documentation/devicetree/bindings/soc/fsl/fsl,qman-portal.yaml b/Documentation/devicetree/bindings/soc/fsl/fsl,qman-portal.yaml
new file mode 100644
index 0000000000000..6c81e0d66f4d5
--- /dev/null
+++ b/Documentation/devicetree/bindings/soc/fsl/fsl,qman-portal.yaml
@@ -0,0 +1,110 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/soc/fsl/fsl,qman-portal.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: QorIQ DPAA Queue Manager Portals
+
+maintainers:
+  - Frank Li <Frank.Li@nxp.com>
+
+description:
+  Portals are memory mapped interfaces to QMan that allow low-latency, lock-less
+  interaction by software running on processor cores, accelerators and network
+  interfaces with the QMan
+
+properties:
+  compatible:
+    oneOf:
+      - const: fsl,qman-portal
+      - items:
+          - enum:
+              - fsl,ls1043-qman-portal
+              - fsl,ls1046-qman-portal
+              - fsl,qman-portal-1.2.0
+          - const: fsl,qman-portal
+
+  reg:
+    items:
+      - description: the cache-enabled region of the portal
+      - description: the cache-inhibited region of the portal
+
+  interrupts:
+    maxItems: 1
+
+  fsl,liodn:
+    $ref: /schemas/types.yaml#/definitions/uint32-array
+    description: See pamu.txt. Two LIODN(s). DQRR LIODN (DLIODN) and Frame LIODN
+      (FLIODN)
+
+  fsl,iommu-parent:
+    $ref: /schemas/types.yaml#/definitions/phandle
+    description: See pamu.txt.
+
+  fsl,qman-channel-id:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    description: qman channel id.
+
+  cell-index:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    description:
+      The hardware index of the channel. This can also be
+      determined by dividing any of the channel's 8 work queue
+      IDs by 8
+
+      In addition to these properties the qman-portals should have sub-nodes to
+      represent the HW devices/portals that are connected to the software portal
+      described here
+
+required:
+  - compatible
+  - reg
+  - interrupts
+
+additionalProperties: false
+
+patternProperties:
+  '^(fman0|fman1|pme|crypto|)+$':
+    type: object
+    properties:
+      fsl,liodn:
+        description: See pamu.txt, PAMU property used for static LIODN assignment
+
+      fsl,iommu-parent:
+        description: See pamu.txt, PAMU property used for dynamic LIODN assignment
+
+      dev-handle:
+        $ref: /schemas/types.yaml#/definitions/phandle
+        description:
+          The phandle to the particular hardware device that this
+          portal is connected to.
+
+    additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/interrupt-controller/irq.h>
+
+    qman-portal@0 {
+        compatible = "fsl,qman-portal-1.2.0", "fsl,qman-portal";
+        reg = <0 0x4000>, <0x100000 0x1000>;
+        interrupts = <104 IRQ_TYPE_EDGE_FALLING 0 0>;
+        fsl,liodn = <1 2>;
+        fsl,qman-channel-id = <0>;
+
+        fman0 {
+            fsl,liodn = <0x21>;
+            dev-handle = <&fman0>;
+        };
+
+        fman1 {
+            fsl,liodn = <0xa1>;
+            dev-handle = <&fman1>;
+        };
+
+        crypto {
+            fsl,liodn = <0x41 0x66>;
+            dev-handle = <&crypto>;
+        };
+    };
diff --git a/Documentation/devicetree/bindings/soc/fsl/fsl,qman.yaml b/Documentation/devicetree/bindings/soc/fsl/fsl,qman.yaml
new file mode 100644
index 0000000000000..341c3d2cfd6c7
--- /dev/null
+++ b/Documentation/devicetree/bindings/soc/fsl/fsl,qman.yaml
@@ -0,0 +1,97 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/soc/fsl/fsl,qman.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: QorIQ DPAA Queue Manager
+
+maintainers:
+  - Frank Li <Frank.Li@nxp.com>
+
+description:
+  The Queue Manager is part of the Data-Path Acceleration Architecture (DPAA). QMan
+  supports queuing and QoS scheduling of frames to CPUs, network interfaces and
+  DPAA logic modules, maintains packet ordering within flows. Besides providing
+  flow-level queuing, is also responsible for congestion management functions such
+  as RED/WRED, congestion notifications and tail discards. This binding covers the
+  CCSR space programming model
+
+properties:
+  compatible:
+    oneOf:
+      - const: fsl,qman
+      - items:
+          - enum:
+              - fsl,ls1043a-qman
+              - fsl,ls1046a-qman
+          - const: fsl,qman
+  reg:
+    items:
+      - description:
+          Registers region within the CCSR address space
+
+          The QMan revision information is located in the QMAN_IP_REV_1/2 registers which
+          are located at offsets 0xbf8 and 0xbfc
+
+  interrupts:
+    items:
+      - description: The error interrupt
+
+  fsl,qman-portals:
+    $ref: /schemas/types.yaml#/definitions/phandle
+    description: ref fsl,qman-port.yaml
+
+  fsl,liodn:
+    $ref: /schemas/types.yaml#/definitions/uint32-array
+    description:
+      See pamu.txt, PAMU property used for static LIODN assignment
+
+  fsl,iommu-parent:
+    $ref: /schemas/types.yaml#/definitions/phandle
+    description:
+      See pamu.txt, PAMU property used for dynamic LIODN assignment
+
+  clocks:
+    maxItems: 1
+    description:
+      See clock-bindings.txt and qoriq-clock.txt
+      Reference input clock. Its frequency is half of the platform clock
+
+  memory-region:
+    $ref: /schemas/types.yaml#/definitions/phandle-array
+    description:
+      List of phandles referencing the QMan private memory
+      nodes (described below). The qman-fqd node must be
+      first followed by qman-pfdr node. Only used on ARM
+
+      Devices connected to a QMan instance via Direct Connect Portals (DCP) must link
+      to the respective QMan instance
+
+  fsl,qman:
+    $ref: /schemas/types.yaml#/definitions/uint32-array
+    description:
+      List of phandle and DCP index pairs, to the QMan instance
+      to which this device is connected via the DCP
+
+required:
+  - compatible
+  - reg
+  - interrupts
+  - fsl,qman-portals
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/interrupt-controller/irq.h>
+
+    qman: qman@318000 {
+        compatible = "fsl,qman";
+        reg = <0x318000 0x1000>;
+        interrupts = <16 IRQ_TYPE_EDGE_FALLING 1 3>;
+        fsl,liodn = <0x16>;
+        fsl,qman-portals = <&qportals>;
+        memory-region = <&qman_fqd &qman_pfdr>;
+        clocks = <&platform_pll 1>;
+    };
diff --git a/Documentation/devicetree/bindings/soc/fsl/qman-portals.txt b/Documentation/devicetree/bindings/soc/fsl/qman-portals.txt
deleted file mode 100644
index 5a34f3ab7bea3..0000000000000
--- a/Documentation/devicetree/bindings/soc/fsl/qman-portals.txt
+++ /dev/null
@@ -1,134 +0,0 @@
-QorIQ DPAA Queue Manager Portals Device Tree Binding
-
-Copyright (C) 2008 - 2014 Freescale Semiconductor Inc.
-
-CONTENTS
-
-	- QMan Portal
-	- Example
-
-QMan Portal Node
-
-Portals are memory mapped interfaces to QMan that allow low-latency, lock-less
-interaction by software running on processor cores, accelerators and network
-interfaces with the QMan
-
-PROPERTIES
-
-- compatible
-	Usage:		Required
-	Value type:	<stringlist>
-	Definition:	Must include "fsl,qman-portal-<hardware revision>"
-			May include "fsl,<SoC>-qman-portal" or "fsl,qman-portal"
-
-- reg
-	Usage:		Required
-	Value type:	<prop-encoded-array>
-	Definition:	Two regions. The first is the cache-enabled region of
-			the portal. The second is the cache-inhibited region of
-			the portal
-
-- interrupts
-	Usage:		Required
-	Value type:	<prop-encoded-array>
-	Definition:	Standard property
-
-- fsl,liodn
-	Usage:		See pamu.txt
-	Value type:	<prop-encoded-array>
-	Definition:	Two LIODN(s). DQRR LIODN (DLIODN) and Frame LIODN
-			(FLIODN)
-
-- fsl,iommu-parent
-	Usage:		See pamu.txt
-	Value type:	<phandle>
-	Definition:	PAMU property used for dynamic LIODN assignment
-
-	For additional details about the PAMU/LIODN binding(s) see pamu.txt
-
-- cell-index
-	Usage:		Required
-	Value type:	<u32>
-	Definition:	The hardware index of the channel. This can also be
-			determined by dividing any of the channel's 8 work queue
-			IDs by 8
-
-In addition to these properties the qman-portals should have sub-nodes to
-represent the HW devices/portals that are connected to the software portal
-described here
-
-The currently supported sub-nodes are:
-	* fman0
-	* fman1
-	* pme
-	* crypto
-
-These subnodes should have the following properties:
-
-- fsl,liodn
-	Usage:		See pamu.txt
-	Value type:	<prop-encoded-array>
-	Definition:	PAMU property used for static LIODN assignment
-
-- fsl,iommu-parent
-	Usage:		See pamu.txt
-	Value type:	<phandle>
-	Definition:	PAMU property used for dynamic LIODN assignment
-
-- dev-handle
-	Usage:		Required
-	Value type:	<phandle>
-	Definition:	The phandle to the particular hardware device that this
-			portal is connected to.
-
-EXAMPLE
-
-The example below shows a (P4080) QMan portals container/bus node with two portals
-
-	qman-portals@ff4200000 {
-		#address-cells = <1>;
-		#size-cells = <1>;
-		compatible = "simple-bus";
-		ranges = <0 0xf 0xf4200000 0x200000>;
-
-		qman-portal@0 {
-			compatible = "fsl,qman-portal-1.2.0", "fsl,qman-portal";
-			reg = <0 0x4000>, <0x100000 0x1000>;
-			interrupts = <104 2 0 0>;
-			fsl,liodn = <1 2>;
-			fsl,qman-channel-id = <0>;
-
-			fman0 {
-				fsl,liodn = <0x21>;
-				dev-handle = <&fman0>;
-			};
-			fman1 {
-				fsl,liodn = <0xa1>;
-				dev-handle = <&fman1>;
-			};
-			crypto {
-				fsl,liodn = <0x41 0x66>;
-				dev-handle = <&crypto>;
-			};
-		};
-		qman-portal@4000 {
-			compatible = "fsl,qman-portal-1.2.0", "fsl,qman-portal";
-			reg = <0x4000 0x4000>, <0x101000 0x1000>;
-			interrupts = <106 2 0 0>;
-			fsl,liodn = <3 4>;
-			cell-index = <1>;
-
-			fman0 {
-				fsl,liodn = <0x22>;
-				dev-handle = <&fman0>;
-			};
-			fman1 {
-				fsl,liodn = <0xa2>;
-				dev-handle = <&fman1>;
-			};
-			crypto {
-				fsl,liodn = <0x42 0x67>;
-				dev-handle = <&crypto>;
-			};
-		};
-	};
diff --git a/Documentation/devicetree/bindings/soc/fsl/qman.txt b/Documentation/devicetree/bindings/soc/fsl/qman.txt
deleted file mode 100644
index ee96afd2af721..0000000000000
--- a/Documentation/devicetree/bindings/soc/fsl/qman.txt
+++ /dev/null
@@ -1,187 +0,0 @@
-QorIQ DPAA Queue Manager Device Tree Binding
-
-Copyright (C) 2008 - 2014 Freescale Semiconductor Inc.
-
-CONTENTS
-
-	- QMan Node
-	- QMan Private Memory Nodes
-	- Example
-
-QMan Node
-
-The Queue Manager is part of the Data-Path Acceleration Architecture (DPAA). QMan
-supports queuing and QoS scheduling of frames to CPUs, network interfaces and
-DPAA logic modules, maintains packet ordering within flows. Besides providing
-flow-level queuing, is also responsible for congestion management functions such
-as RED/WRED, congestion notifications and tail discards. This binding covers the
-CCSR space programming model
-
-PROPERTIES
-
-- compatible
-	Usage:		Required
-	Value type:	<stringlist>
-	Definition:	Must include "fsl,qman"
-			May include "fsl,<SoC>-qman"
-
-- reg
-	Usage:		Required
-	Value type:	<prop-encoded-array>
-	Definition:	Registers region within the CCSR address space
-
-The QMan revision information is located in the QMAN_IP_REV_1/2 registers which
-are located at offsets 0xbf8 and 0xbfc
-
-- interrupts
-	Usage:		Required
-	Value type:	<prop-encoded-array>
-	Definition:	Standard property. The error interrupt
-
-- fsl,qman-portals
-	Usage:		Required
-	Value type:	<phandle>
-	Definition:	Phandle to this QMan instance's portals
-
-- fsl,liodn
-	Usage:		See pamu.txt
-	Value type:	<prop-encoded-array>
-	Definition:	PAMU property used for static LIODN assignment
-
-- fsl,iommu-parent
-	Usage:		See pamu.txt
-	Value type:	<phandle>
-	Definition:	PAMU property used for dynamic LIODN assignment
-
-	For additional details about the PAMU/LIODN binding(s) see pamu.txt
-
-- clocks
-	Usage:		See clock-bindings.txt and qoriq-clock.txt
-	Value type:	<prop-encoded-array>
-	Definition:	Reference input clock. Its frequency is half of the
-			platform clock
-- memory-regions
-	Usage:		Required for ARM
-	Value type:	<phandle array>
-	Definition:	List of phandles referencing the QMan private memory
-			nodes (described below). The qman-fqd node must be
-			first followed by qman-pfdr node. Only used on ARM
-
-Devices connected to a QMan instance via Direct Connect Portals (DCP) must link
-to the respective QMan instance
-
-- fsl,qman
-	Usage:		Required
-	Value type:	<prop-encoded-array>
-	Description:	List of phandle and DCP index pairs, to the QMan instance
-			to which this device is connected via the DCP
-
-QMan Private Memory Nodes
-
-QMan requires two contiguous range of physical memory used for the backing store
-for QMan Frame Queue Descriptor (FQD) and Packed Frame Descriptor Record (PFDR).
-This memory is reserved/allocated as a node under the /reserved-memory node.
-
-For additional details about reserved memory regions see reserved-memory.txt
-
-The QMan FQD memory node must be named "qman-fqd"
-
-PROPERTIES
-
-- compatible
-	Usage:		required
-	Value type:	<stringlist>
-	Definition:	PPC platforms: Must include "fsl,qman-fqd"
-			ARM platforms: Must include "shared-dma-pool"
-				       as well as the "no-map" property
-
-The QMan PFDR memory node must be named "qman-pfdr"
-
-PROPERTIES
-
-- compatible
-	Usage:		required
-	Value type:	<stringlist>
-	Definition:	PPC platforms: Must include "fsl,qman-pfdr"
-			ARM platforms: Must include "shared-dma-pool"
-				       as well as the "no-map" property
-
-The following constraints are relevant to the FQD and PFDR private memory:
-	- The size must be 2^(size + 1), with size = 11..29. That is 4 KiB to
-	  1 GiB
-	- The alignment must be a muliptle of the memory size
-
-The size of the FQD and PFDP must be chosen by observing the hardware features
-configured via the Reset Configuration Word (RCW) and that are relevant to a
-specific board (e.g. number of MAC(s) pinned-out, number of offline/host command
-FMan ports, etc.). The size configured in the DT must reflect the hardware
-capabilities and not the specific needs of an application
-
-For additional details about reserved memory regions see reserved-memory.txt
-
-EXAMPLE
-
-The example below shows a QMan FQD and a PFDR dynamic allocation memory nodes
-
-	reserved-memory {
-		#address-cells = <2>;
-		#size-cells = <2>;
-		ranges;
-
-		qman_fqd: qman-fqd {
-			compatible = "shared-dma-pool";
-			size = <0 0x400000>;
-			alignment = <0 0x400000>;
-			no-map;
-		};
-		qman_pfdr: qman-pfdr {
-			compatible = "shared-dma-pool";
-			size = <0 0x2000000>;
-			alignment = <0 0x2000000>;
-			no-map;
-		};
-	};
-
-The example below shows a (P4080) QMan CCSR-space node
-
-	qportals: qman-portals@ff4200000 {
-		...
-	};
-
-	clockgen: global-utilities@e1000 {
-		...
-		sysclk: sysclk {
-			...
-		};
-		...
-		platform_pll: platform-pll@c00 {
-			#clock-cells = <1>;
-			reg = <0xc00 0x4>;
-			compatible = "fsl,qoriq-platform-pll-1.0";
-			clocks = <&sysclk>;
-			clock-output-names = "platform-pll", "platform-pll-div2";
-		};
-		...
-	};
-
-	crypto@300000 {
-		...
-		fsl,qman = <&qman, 2>;
-		...
-	};
-
-	qman: qman@318000 {
-		compatible = "fsl,qman";
-		reg = <0x318000 0x1000>;
-		interrupts = <16 2 1 3>
-		fsl,liodn = <0x16>;
-		fsl,qman-portals = <&qportals>;
-		memory-region = <&qman_fqd &qman_pfdr>;
-		clocks = <&platform_pll 1>;
-	};
-
-	fman@400000 {
-		...
-		fsl,qman = <&qman, 0>;
-		...
-	};
-- 
2.34.1

Re: [PATCH 1/1] dt-bindings: soc: fsl: Convert q(b)man-* to yaml format

[Rob Herring (Arm)]

On Fri, 21 Jun 2024 17:30:14 -0400, Frank Li wrote:
> Convert qman, bman, qman-portals, bman-portals to yaml format.
> 
> Additional Chang for fsl,q(b)man-portal:
> - Only keep one example.
> - Add fsl,qman-channel-id property.
> - Use interrupt type macro.
> - Remove top level qman-portals@ff4200000 at example.
> 
> Additional change for fsl,q(b)man:
> - Fixed example error.
> - Remove redundent part, only keep fsl,qman node.
> - Change memory-regions to memory-region.
> - fsl,q(b)man-portals is not required property
> 
> Additional change for fsl,qman-fqd.yaml:
> - Fixed example error.
> - Only keep one example.
> - Ref to reserve-memory.yaml
> - Merge fsl,bman reserver memory part
> 
> Signed-off-by: Frank Li <Frank.Li@nxp.com>
> ---
>  .../bindings/soc/fsl/bman-portals.txt         |  56 ------
>  .../devicetree/bindings/soc/fsl/bman.txt      | 137 -------------
>  .../bindings/soc/fsl/fsl,bman-portal.yaml     |  51 +++++
>  .../devicetree/bindings/soc/fsl/fsl,bman.yaml |  83 ++++++++
>  .../bindings/soc/fsl/fsl,qman-fqd.yaml        |  68 +++++++
>  .../bindings/soc/fsl/fsl,qman-portal.yaml     | 110 +++++++++++
>  .../devicetree/bindings/soc/fsl/fsl,qman.yaml |  97 +++++++++
>  .../bindings/soc/fsl/qman-portals.txt         | 134 -------------
>  .../devicetree/bindings/soc/fsl/qman.txt      | 187 ------------------
>  9 files changed, 409 insertions(+), 514 deletions(-)
>  delete mode 100644 Documentation/devicetree/bindings/soc/fsl/bman-portals.txt
>  delete mode 100644 Documentation/devicetree/bindings/soc/fsl/bman.txt
>  create mode 100644 Documentation/devicetree/bindings/soc/fsl/fsl,bman-portal.yaml
>  create mode 100644 Documentation/devicetree/bindings/soc/fsl/fsl,bman.yaml
>  create mode 100644 Documentation/devicetree/bindings/soc/fsl/fsl,qman-fqd.yaml
>  create mode 100644 Documentation/devicetree/bindings/soc/fsl/fsl,qman-portal.yaml
>  create mode 100644 Documentation/devicetree/bindings/soc/fsl/fsl,qman.yaml
>  delete mode 100644 Documentation/devicetree/bindings/soc/fsl/qman-portals.txt
>  delete mode 100644 Documentation/devicetree/bindings/soc/fsl/qman.txt
> 

My bot found errors running 'make dt_binding_check' on your patch:

yamllint warnings/errors:

dtschema/dtc warnings/errors:
Documentation/devicetree/bindings/soc/fsl/fsl,bman-portal.example.dtb: /example-0/bman-portal@0: failed to match any schema with compatible: ['fsl,bman-portal-1.0.0', 'fsl,bman-portal']

doc reference errors (make refcheckdocs):

See https://patchwork.ozlabs.org/project/devicetree-bindings/patch/20240621213031.2759046-1-Frank.Li@nxp.com

The base for the series is generally the latest rc1. A different dependency
should be noted in *this* patch.

If you already ran 'make dt_binding_check' and didn't see the above
error(s), then make sure 'yamllint' is installed and dt-schema is up to
date:

pip3 install dtschema --upgrade

Please check and re-submit after running the above command yourself. Note
that DT_SCHEMA_FILES can be set to your schema file to speed up checking
your schema. However, it must be unset to test all examples with your schema.

Re: [PATCH 1/1] dt-bindings: soc: fsl: Convert q(b)man-* to yaml format

[Rob Herring]

On Fri, Jun 21, 2024 at 05:30:14PM -0400, Frank Li wrote:
> Convert qman, bman, qman-portals, bman-portals to yaml format.
> 
> Additional Chang for fsl,q(b)man-portal:

typo

> - Only keep one example.
> - Add fsl,qman-channel-id property.
> - Use interrupt type macro.
> - Remove top level qman-portals@ff4200000 at example.
> 
> Additional change for fsl,q(b)man:
> - Fixed example error.
> - Remove redundent part, only keep fsl,qman node.
> - Change memory-regions to memory-region.
> - fsl,q(b)man-portals is not required property
> 
> Additional change for fsl,qman-fqd.yaml:
> - Fixed example error.
> - Only keep one example.
> - Ref to reserve-memory.yaml
> - Merge fsl,bman reserver memory part
> 
> Signed-off-by: Frank Li <Frank.Li@nxp.com>
> ---
>  .../bindings/soc/fsl/bman-portals.txt         |  56 ------
>  .../devicetree/bindings/soc/fsl/bman.txt      | 137 -------------
>  .../bindings/soc/fsl/fsl,bman-portal.yaml     |  51 +++++
>  .../devicetree/bindings/soc/fsl/fsl,bman.yaml |  83 ++++++++
>  .../bindings/soc/fsl/fsl,qman-fqd.yaml        |  68 +++++++
>  .../bindings/soc/fsl/fsl,qman-portal.yaml     | 110 +++++++++++
>  .../devicetree/bindings/soc/fsl/fsl,qman.yaml |  97 +++++++++
>  .../bindings/soc/fsl/qman-portals.txt         | 134 -------------
>  .../devicetree/bindings/soc/fsl/qman.txt      | 187 ------------------
>  9 files changed, 409 insertions(+), 514 deletions(-)
>  delete mode 100644 Documentation/devicetree/bindings/soc/fsl/bman-portals.txt
>  delete mode 100644 Documentation/devicetree/bindings/soc/fsl/bman.txt
>  create mode 100644 Documentation/devicetree/bindings/soc/fsl/fsl,bman-portal.yaml
>  create mode 100644 Documentation/devicetree/bindings/soc/fsl/fsl,bman.yaml
>  create mode 100644 Documentation/devicetree/bindings/soc/fsl/fsl,qman-fqd.yaml
>  create mode 100644 Documentation/devicetree/bindings/soc/fsl/fsl,qman-portal.yaml
>  create mode 100644 Documentation/devicetree/bindings/soc/fsl/fsl,qman.yaml
>  delete mode 100644 Documentation/devicetree/bindings/soc/fsl/qman-portals.txt
>  delete mode 100644 Documentation/devicetree/bindings/soc/fsl/qman.txt


> diff --git a/Documentation/devicetree/bindings/soc/fsl/fsl,bman-portal.yaml b/Documentation/devicetree/bindings/soc/fsl/fsl,bman-portal.yaml
> new file mode 100644
> index 0000000000000..06b51f049098f
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/soc/fsl/fsl,bman-portal.yaml
> @@ -0,0 +1,51 @@
> +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
> +%YAML 1.2
> +---
> +$id: http://devicetree.org/schemas/soc/fsl/fsl,bman-portal.yaml#
> +$schema: http://devicetree.org/meta-schemas/core.yaml#
> +
> +title: QorIQ DPAA Queue Manager Portals
> +
> +maintainers:
> +  - Frank Li <Frank.Li@nxp.com>
> +
> +description:
> +  QorIQ DPAA Buffer Manager Portal
> +
> +  Portals are memory mapped interfaces to BMan that allow low-latency, lock-less
> +  interaction by software running on processor cores, accelerators and network
> +  interfaces with the BMan
> +
> +properties:
> +  compatible:
> +    oneOf:
> +      - const: fsl,bman-portal
> +      - items:
> +          - enum:
> +              - fsl,ls1043a-bmap-portal
> +              - fsl,ls1046a-bmap-portal
> +          - const: fsl,bman-portal
> +  reg:
> +    items:
> +      - description: the cache-enabled region of the portal
> +      - description: the cache-inhibited region of the porta

typo

> +
> +  interrupts:
> +    maxItems: 1
> +
> +required:
> +  - compatible
> +  - reg
> +  - interrupts
> +
> +additionalProperties: false
> +
> +examples:
> +  - |
> +    #include <dt-bindings/interrupt-controller/irq.h>
> +
> +    bman-portal@0 {
> +        compatible = "fsl,bman-portal-1.0.0", "fsl,bman-portal";
> +        reg = <0x0 0x4000>, <0x100000 0x1000>;
> +        interrupts = <105 IRQ_TYPE_EDGE_FALLING 0 0>;
> +    };
> diff --git a/Documentation/devicetree/bindings/soc/fsl/fsl,bman.yaml b/Documentation/devicetree/bindings/soc/fsl/fsl,bman.yaml
> new file mode 100644
> index 0000000000000..e6b3d489ce5cc
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/soc/fsl/fsl,bman.yaml
> @@ -0,0 +1,83 @@
> +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
> +%YAML 1.2
> +---
> +$id: http://devicetree.org/schemas/soc/fsl/fsl,bman.yaml#
> +$schema: http://devicetree.org/meta-schemas/core.yaml#
> +
> +title: QorIQ DPAA Buffer Manager
> +
> +maintainers:
> +  - Frank Li <Frank.Li@nxp.com>
> +
> +description:
> +  The Buffer Manager is part of the Data-Path Acceleration Architecture (DPAA).
> +  BMan supports hardware allocation and deallocation of buffers belonging to pools
> +  originally created by software with configurable depletion thresholds. This
> +  binding covers the CCSR space programming model
> +
> +properties:
> +  compatible:
> +    oneOf:
> +      - const: fsl,bman
> +      - items:
> +          - enum:
> +              - fsl,ls1043a-bman
> +              - fsl,ls1046a-bman
> +          - const: fsl,bman
> +
> +  reg:
> +    items:
> +      - description:

Needs '|' if you want formatting preserved.

> +          Registers region within the CCSR address space
> +
> +          The BMan revision information is located in the BMAN_IP_REV_1/2 registers which
> +          are located at offsets 0xbf8 and 0xbfc

Wrap lines at 80 unless there's a good reason to go to 100. There isn't 
here.

> +
> +  interrupts:
> +    items:
> +      - description: The error interrupt
> +
> +  memory-region:
> +    $ref: /schemas/types.yaml#/definitions/phandle-array

memory-region already has a type. Need to define how many entries and 
what they are.

> +    description:
> +      List of phandles referencing the BMan private memory
> +      nodes (described below). The bman-fqd node must be
> +      first followed by bman-pfdr node. Only used on ARM
> +
> +      Devices connected to a BMan instance via Direct Connect Portals (DCP) must link
> +      to the respective BMan instance
> +
> +  fsl,bman-portals:
> +    $ref: /schemas/types.yaml#/definitions/phandle
> +    description: ref fsl,bman-port.yaml
> +
> +  fsl,liodn:
> +    $ref: /schemas/types.yaml#/definitions/uint32-array
> +    description:
> +      See pamu.txt, PAMU property used for static LIODN assignment
> +
> +  fsl,iommu-parent:
> +    $ref: /schemas/types.yaml#/definitions/phandle
> +    description:
> +      See pamu.txt, PAMU property used for dynamic LIODN assignment
> +
> +required:
> +  - compatible
> +  - reg
> +  - interrupts
> +  - fsl,bman-portals
> +
> +additionalProperties: false
> +
> +examples:
> +  - |
> +    #include <dt-bindings/interrupt-controller/irq.h>
> +
> +    bman@31a000 {
> +        compatible = "fsl,bman";
> +        reg = <0x31a000 0x1000>;
> +        interrupts = <16 IRQ_TYPE_EDGE_FALLING 1 2>;
> +        fsl,liodn = <0x17>;
> +        fsl,bman-portals = <&bportals>;
> +        memory-region = <&bman_fbpr>;
> +    };
> diff --git a/Documentation/devicetree/bindings/soc/fsl/fsl,qman-fqd.yaml b/Documentation/devicetree/bindings/soc/fsl/fsl,qman-fqd.yaml
> new file mode 100644
> index 0000000000000..f7af14dc7deb6
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/soc/fsl/fsl,qman-fqd.yaml
> @@ -0,0 +1,68 @@
> +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
> +%YAML 1.2
> +---
> +$id: http://devicetree.org/schemas/soc/fsl/fsl,qman-fqd.yaml#
> +$schema: http://devicetree.org/meta-schemas/core.yaml#
> +
> +title: QMan Private Memory Nodes
> +
> +maintainers:
> +  - Frank Li <Frank.Li@nxp.com>
> +
> +description: |
> +  QMan requires two contiguous range of physical memory used for the backing store
> +  for QMan Frame Queue Descriptor (FQD) and Packed Frame Descriptor Record (PFDR).
> +  This memory is reserved/allocated as a node under the /reserved-memory node.
> +
> +  BMan requires a contiguous range of physical memory used for the backing store
> +  for BMan Free Buffer Proxy Records (FBPR). This memory is reserved/allocated as
> +  a node under the /reserved-memory node.
> +
> +  The QMan FQD memory node must be named "qman-fqd"
> +  The QMan PFDR memory node must be named "qman-pfdr"
> +  The BMan FBPR memory node must be named "bman-fbpr"
> +
> +  The following constraints are relevant to the FQD and PFDR private memory:
> +    - The size must be 2^(size + 1), with size = 11..29. That is 4 KiB to
> +      1 GiB
> +    - The alignment must be a muliptle of the memory size
> +
> +  The size of the FQD and PFDP must be chosen by observing the hardware features
> +  configured via the Reset Configuration Word (RCW) and that are relevant to a
> +  specific board (e.g. number of MAC(s) pinned-out, number of offline/host command
> +  FMan ports, etc.). The size configured in the DT must reflect the hardware
> +  capabilities and not the specific needs of an application
> +
> +  For additional details about reserved memory regions see reserved-memory.txt

Please read what that document says.

> +
> +properties:
> +  $nodename:
> +    pattern: '^(qman-fqd|qman-pfdr|bman-fbpr|)+$'

Don't need the last '|' or the '+'.

> +
> +  compatible:
> +    enum:
> +      - fsl,qman-fqd
> +      - fsl,qman-pfdr
> +      - fsl,bman-fbpr
> +
> +required:
> +  - compatible
> +
> +allOf:
> +  - $ref: reserved-memory.yaml
> +
> +unevaluatedProperties: false
> +
> +examples:
> +  - |
> +    reserved-memory {
> +        #address-cells = <2>;
> +        #size-cells = <2>;
> +
> +        qman-fqd {
> +            compatible = "shared-dma-pool";
> +            size = <0 0x400000>;
> +            alignment = <0 0x400000>;
> +            no-map;
> +        };
> +    };
> diff --git a/Documentation/devicetree/bindings/soc/fsl/fsl,qman-portal.yaml b/Documentation/devicetree/bindings/soc/fsl/fsl,qman-portal.yaml
> new file mode 100644
> index 0000000000000..6c81e0d66f4d5
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/soc/fsl/fsl,qman-portal.yaml
> @@ -0,0 +1,110 @@
> +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
> +%YAML 1.2
> +---
> +$id: http://devicetree.org/schemas/soc/fsl/fsl,qman-portal.yaml#
> +$schema: http://devicetree.org/meta-schemas/core.yaml#
> +
> +title: QorIQ DPAA Queue Manager Portals
> +
> +maintainers:
> +  - Frank Li <Frank.Li@nxp.com>
> +
> +description:
> +  Portals are memory mapped interfaces to QMan that allow low-latency, lock-less
> +  interaction by software running on processor cores, accelerators and network
> +  interfaces with the QMan
> +
> +properties:
> +  compatible:
> +    oneOf:
> +      - const: fsl,qman-portal
> +      - items:
> +          - enum:
> +              - fsl,ls1043-qman-portal
> +              - fsl,ls1046-qman-portal
> +              - fsl,qman-portal-1.2.0
> +          - const: fsl,qman-portal
> +
> +  reg:
> +    items:
> +      - description: the cache-enabled region of the portal
> +      - description: the cache-inhibited region of the portal
> +
> +  interrupts:
> +    maxItems: 1
> +
> +  fsl,liodn:
> +    $ref: /schemas/types.yaml#/definitions/uint32-array
> +    description: See pamu.txt. Two LIODN(s). DQRR LIODN (DLIODN) and Frame LIODN
> +      (FLIODN)
> +
> +  fsl,iommu-parent:
> +    $ref: /schemas/types.yaml#/definitions/phandle
> +    description: See pamu.txt.
> +
> +  fsl,qman-channel-id:
> +    $ref: /schemas/types.yaml#/definitions/uint32
> +    description: qman channel id.
> +
> +  cell-index:
> +    $ref: /schemas/types.yaml#/definitions/uint32
> +    description:
> +      The hardware index of the channel. This can also be
> +      determined by dividing any of the channel's 8 work queue
> +      IDs by 8
> +
> +      In addition to these properties the qman-portals should have sub-nodes to
> +      represent the HW devices/portals that are connected to the software portal
> +      described here
> +
> +required:
> +  - compatible
> +  - reg
> +  - interrupts
> +
> +additionalProperties: false
> +
> +patternProperties:
> +  '^(fman0|fman1|pme|crypto|)+$':

Same regex problems here.

> +    type: object
> +    properties:
> +      fsl,liodn:
> +        description: See pamu.txt, PAMU property used for static LIODN assignment
> +
> +      fsl,iommu-parent:
> +        description: See pamu.txt, PAMU property used for dynamic LIODN assignment
> +
> +      dev-handle:
> +        $ref: /schemas/types.yaml#/definitions/phandle
> +        description:
> +          The phandle to the particular hardware device that this
> +          portal is connected to.
> +
> +    additionalProperties: false
> +
> +examples:
> +  - |
> +    #include <dt-bindings/interrupt-controller/irq.h>
> +
> +    qman-portal@0 {
> +        compatible = "fsl,qman-portal-1.2.0", "fsl,qman-portal";
> +        reg = <0 0x4000>, <0x100000 0x1000>;
> +        interrupts = <104 IRQ_TYPE_EDGE_FALLING 0 0>;
> +        fsl,liodn = <1 2>;
> +        fsl,qman-channel-id = <0>;
> +
> +        fman0 {
> +            fsl,liodn = <0x21>;
> +            dev-handle = <&fman0>;
> +        };
> +
> +        fman1 {
> +            fsl,liodn = <0xa1>;
> +            dev-handle = <&fman1>;
> +        };
> +
> +        crypto {
> +            fsl,liodn = <0x41 0x66>;
> +            dev-handle = <&crypto>;
> +        };
> +    };
> diff --git a/Documentation/devicetree/bindings/soc/fsl/fsl,qman.yaml b/Documentation/devicetree/bindings/soc/fsl/fsl,qman.yaml
> new file mode 100644
> index 0000000000000..341c3d2cfd6c7
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/soc/fsl/fsl,qman.yaml
> @@ -0,0 +1,97 @@
> +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
> +%YAML 1.2
> +---
> +$id: http://devicetree.org/schemas/soc/fsl/fsl,qman.yaml#
> +$schema: http://devicetree.org/meta-schemas/core.yaml#
> +
> +title: QorIQ DPAA Queue Manager
> +
> +maintainers:
> +  - Frank Li <Frank.Li@nxp.com>
> +
> +description:
> +  The Queue Manager is part of the Data-Path Acceleration Architecture (DPAA). QMan
> +  supports queuing and QoS scheduling of frames to CPUs, network interfaces and
> +  DPAA logic modules, maintains packet ordering within flows. Besides providing
> +  flow-level queuing, is also responsible for congestion management functions such
> +  as RED/WRED, congestion notifications and tail discards. This binding covers the
> +  CCSR space programming model
> +
> +properties:
> +  compatible:
> +    oneOf:
> +      - const: fsl,qman
> +      - items:
> +          - enum:
> +              - fsl,ls1043a-qman
> +              - fsl,ls1046a-qman
> +          - const: fsl,qman
> +  reg:
> +    items:
> +      - description:
> +          Registers region within the CCSR address space
> +
> +          The QMan revision information is located in the QMAN_IP_REV_1/2 registers which
> +          are located at offsets 0xbf8 and 0xbfc
> +
> +  interrupts:
> +    items:
> +      - description: The error interrupt
> +
> +  fsl,qman-portals:
> +    $ref: /schemas/types.yaml#/definitions/phandle
> +    description: ref fsl,qman-port.yaml
> +
> +  fsl,liodn:
> +    $ref: /schemas/types.yaml#/definitions/uint32-array
> +    description:
> +      See pamu.txt, PAMU property used for static LIODN assignment
> +
> +  fsl,iommu-parent:
> +    $ref: /schemas/types.yaml#/definitions/phandle
> +    description:
> +      See pamu.txt, PAMU property used for dynamic LIODN assignment
> +
> +  clocks:
> +    maxItems: 1
> +    description:
> +      See clock-bindings.txt and qoriq-clock.txt

Drop.

> +      Reference input clock. Its frequency is half of the platform clock
> +
> +  memory-region:
> +    $ref: /schemas/types.yaml#/definitions/phandle-array
> +    description:
> +      List of phandles referencing the QMan private memory
> +      nodes (described below). The qman-fqd node must be
> +      first followed by qman-pfdr node. Only used on ARM
> +
> +      Devices connected to a QMan instance via Direct Connect Portals (DCP) must link
> +      to the respective QMan instance
> +
> +  fsl,qman:
> +    $ref: /schemas/types.yaml#/definitions/uint32-array
> +    description:
> +      List of phandle and DCP index pairs, to the QMan instance
> +      to which this device is connected via the DCP
> +
> +required:
> +  - compatible
> +  - reg
> +  - interrupts
> +  - fsl,qman-portals
> +
> +additionalProperties: false
> +
> +examples:
> +  - |
> +    #include <dt-bindings/interrupt-controller/irq.h>
> +
> +    qman: qman@318000 {
> +        compatible = "fsl,qman";
> +        reg = <0x318000 0x1000>;
> +        interrupts = <16 IRQ_TYPE_EDGE_FALLING 1 3>;
> +        fsl,liodn = <0x16>;
> +        fsl,qman-portals = <&qportals>;
> +        memory-region = <&qman_fqd &qman_pfdr>;
> +        clocks = <&platform_pll 1>;
> +    };