[PATCH net-next v3 6/8] net: ethernet: fs_enet: use macros for speed and duplex values

[Maxime Chevallier <maxime.chevallier@bootlin.com>]

The PHY speed and duplex should be manipulated using the SPEED_XXX and
DUPLEX_XXX macros available. Use it in the fcc, fec and scc MAC for
fs_enet.

Acked-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Reviewed-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: Maxime Chevallier <maxime.chevallier@bootlin.com>
---
 drivers/net/ethernet/freescale/fs_enet/mac-fcc.c | 4 ++--
 drivers/net/ethernet/freescale/fs_enet/mac-fec.c | 2 +-
 drivers/net/ethernet/freescale/fs_enet/mac-scc.c | 2 +-
 3 files changed, 4 insertions(+), 4 deletions(-)

diff --git a/drivers/net/ethernet/freescale/fs_enet/mac-fcc.c b/drivers/net/ethernet/freescale/fs_enet/mac-fcc.c
index 159a384813b3..666a54d6e667 100644
--- a/drivers/net/ethernet/freescale/fs_enet/mac-fcc.c
+++ b/drivers/net/ethernet/freescale/fs_enet/mac-fcc.c
@@ -360,7 +360,7 @@ static void restart(struct net_device *dev)
 
 	/* adjust to speed (for RMII mode) */
 	if (fpi->use_rmii) {
-		if (dev->phydev->speed == 100)
+		if (dev->phydev->speed == SPEED_100)
 			C8(fcccp, fcc_gfemr, 0x20);
 		else
 			S8(fcccp, fcc_gfemr, 0x20);
@@ -386,7 +386,7 @@ static void restart(struct net_device *dev)
 		S32(fccp, fcc_fpsmr, FCC_PSMR_RMII);
 
 	/* adjust to duplex mode */
-	if (dev->phydev->duplex)
+	if (dev->phydev->duplex == DUPLEX_FULL)
 		S32(fccp, fcc_fpsmr, FCC_PSMR_FDE | FCC_PSMR_LPB);
 	else
 		C32(fccp, fcc_fpsmr, FCC_PSMR_FDE | FCC_PSMR_LPB);
diff --git a/drivers/net/ethernet/freescale/fs_enet/mac-fec.c b/drivers/net/ethernet/freescale/fs_enet/mac-fec.c
index cf4c49e884ba..c1b7877178b9 100644
--- a/drivers/net/ethernet/freescale/fs_enet/mac-fec.c
+++ b/drivers/net/ethernet/freescale/fs_enet/mac-fec.c
@@ -308,7 +308,7 @@ static void restart(struct net_device *dev)
 	/*
 	 * adjust to duplex mode
 	 */
-	if (dev->phydev->duplex) {
+	if (dev->phydev->duplex == DUPLEX_FULL) {
 		FC(fecp, r_cntrl, FEC_RCNTRL_DRT);
 		FS(fecp, x_cntrl, FEC_TCNTRL_FDEN);	/* FD enable */
 	} else {
diff --git a/drivers/net/ethernet/freescale/fs_enet/mac-scc.c b/drivers/net/ethernet/freescale/fs_enet/mac-scc.c
index 6edc9f66ae83..d061092ced6c 100644
--- a/drivers/net/ethernet/freescale/fs_enet/mac-scc.c
+++ b/drivers/net/ethernet/freescale/fs_enet/mac-scc.c
@@ -337,7 +337,7 @@ static void restart(struct net_device *dev)
 	W16(sccp, scc_psmr, SCC_PSMR_ENCRC | SCC_PSMR_NIB22);
 
 	/* Set full duplex mode if needed */
-	if (dev->phydev->duplex)
+	if (dev->phydev->duplex == DUPLEX_FULL)
 		S16(sccp, scc_psmr, SCC_PSMR_LPB | SCC_PSMR_FDE);
 
 	/* Restore multicast and promiscuous settings */
-- 
2.46.0