From: Maxime Chevallier <maxime.chevallier@bootlin.com>
To: davem@davemloft.net, Andrew Lunn <andrew@lunn.ch>,
Jakub Kicinski <kuba@kernel.org>,
Eric Dumazet <edumazet@google.com>,
Paolo Abeni <pabeni@redhat.com>,
Russell King <linux@armlinux.org.uk>,
Christophe Leroy <christophe.leroy@csgroup.eu>,
Heiner Kallweit <hkallweit1@gmail.com>
Cc: "Maxime Chevallier" <maxime.chevallier@bootlin.com>,
netdev@vger.kernel.org, linux-kernel@vger.kernel.org,
thomas.petazzoni@bootlin.com,
"Herve Codina" <herve.codina@bootlin.com>,
"Uwe Kleine-König" <u.kleine-koenig@baylibre.com>,
linuxppc-dev@lists.ozlabs.org
Subject: [PATCH net-next v2 07/10] net: freescale: ucc_geth: Hardcode the preamble length to 7 bytes
Date: Thu, 14 Nov 2024 16:35:58 +0100 [thread overview]
Message-ID: <20241114153603.307872-8-maxime.chevallier@bootlin.com> (raw)
In-Reply-To: <20241114153603.307872-1-maxime.chevallier@bootlin.com>
The preamble length can be configured in ucc_geth, however it just
ends-up always being configured to 7 bytes, as nothing ever changes the
default value of 7.
Make that value the default value when the MACCFG2 register gets
initialized, and remove the code to configure that value altogether.
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: Maxime Chevallier <maxime.chevallier@bootlin.com>
---
V2: No changes
drivers/net/ethernet/freescale/ucc_geth.c | 21 ---------------------
drivers/net/ethernet/freescale/ucc_geth.h | 4 ++--
2 files changed, 2 insertions(+), 23 deletions(-)
diff --git a/drivers/net/ethernet/freescale/ucc_geth.c b/drivers/net/ethernet/freescale/ucc_geth.c
index 7db575a1e710..57e8f0718dc7 100644
--- a/drivers/net/ethernet/freescale/ucc_geth.c
+++ b/drivers/net/ethernet/freescale/ucc_geth.c
@@ -132,7 +132,6 @@ static const struct ucc_geth_info ugeth_primary_info = {
.transmitFlowControl = 1,
.maxGroupAddrInHash = 4,
.maxIndAddrInHash = 4,
- .prel = 7,
.maxFrameLength = 1518+16, /* Add extra bytes for VLANs etc. */
.minFrameLength = 64,
.maxD1Length = 1520+16, /* Add extra bytes for VLANs etc. */
@@ -1205,18 +1204,6 @@ static int init_mac_station_addr_regs(u8 address_byte_0,
return 0;
}
-static int init_preamble_length(u8 preamble_length,
- u32 __iomem *maccfg2_register)
-{
- if ((preamble_length < 3) || (preamble_length > 7))
- return -EINVAL;
-
- clrsetbits_be32(maccfg2_register, MACCFG2_PREL_MASK,
- preamble_length << MACCFG2_PREL_SHIFT);
-
- return 0;
-}
-
static int init_rx_parameters(int reject_broadcast,
int receive_short_frames,
int promiscuous, u32 __iomem *upsmr_register)
@@ -1276,7 +1263,6 @@ static int adjust_enet_interface(struct ucc_geth_private *ugeth)
struct ucc_geth_info *ug_info;
struct ucc_geth __iomem *ug_regs;
struct ucc_fast __iomem *uf_regs;
- int ret_val;
u32 upsmr, maccfg2;
u16 value;
@@ -1352,13 +1338,6 @@ static int adjust_enet_interface(struct ucc_geth_private *ugeth)
put_device(&tbiphy->mdio.dev);
}
- ret_val = init_preamble_length(ug_info->prel, &ug_regs->maccfg2);
- if (ret_val != 0) {
- if (netif_msg_probe(ugeth))
- pr_err("Preamble length must be between 3 and 7 inclusive\n");
- return ret_val;
- }
-
return 0;
}
diff --git a/drivers/net/ethernet/freescale/ucc_geth.h b/drivers/net/ethernet/freescale/ucc_geth.h
index 2365b61c743a..dfb727327093 100644
--- a/drivers/net/ethernet/freescale/ucc_geth.h
+++ b/drivers/net/ethernet/freescale/ucc_geth.h
@@ -921,7 +921,8 @@ struct ucc_geth_hardware_statistics {
#define UCC_GETH_UPSMR_INIT UCC_GETH_UPSMR_RES1
#define UCC_GETH_MACCFG1_INIT 0
-#define UCC_GETH_MACCFG2_INIT (MACCFG2_RESERVED_1)
+#define UCC_GETH_MACCFG2_INIT (MACCFG2_RESERVED_1 | \
+ (7 << MACCFG2_PREL_SHIFT))
/* Ethernet Address Type. */
enum enet_addr_type {
@@ -1113,7 +1114,6 @@ struct ucc_geth_info {
int transmitFlowControl;
u8 maxGroupAddrInHash;
u8 maxIndAddrInHash;
- u8 prel;
u16 maxFrameLength;
u16 minFrameLength;
u16 maxD1Length;
--
2.47.0
next prev parent reply other threads:[~2024-11-14 15:36 UTC|newest]
Thread overview: 13+ messages / expand[flat|nested] mbox.gz Atom feed top
2024-11-14 15:35 [PATCH net-next v2 00/10] net: freescale: ucc_geth: Phylink conversion Maxime Chevallier
2024-11-14 15:35 ` [PATCH net-next v2 01/10] net: freescale: ucc_geth: Drop support for the "interface" DT property Maxime Chevallier
2024-11-15 12:19 ` Simon Horman
2024-11-20 8:43 ` Maxime Chevallier
2024-11-14 15:35 ` [PATCH net-next v2 02/10] net: freescale: ucc_geth: split adjust_link for phylink conversion Maxime Chevallier
2024-11-14 15:35 ` [PATCH net-next v2 03/10] net: freescale: ucc_geth: Use netdev->phydev to access the PHY Maxime Chevallier
2024-11-14 15:35 ` [PATCH net-next v2 04/10] net: freescale: ucc_geth: Fix WOL configuration Maxime Chevallier
2024-11-14 15:35 ` [PATCH net-next v2 05/10] net: freescale: ucc_geth: Use the correct type to store WoL opts Maxime Chevallier
2024-11-14 15:35 ` [PATCH net-next v2 06/10] net: freescale: ucc_geth: Simplify frame length check Maxime Chevallier
2024-11-14 15:35 ` Maxime Chevallier [this message]
2024-11-14 15:35 ` [PATCH net-next v2 08/10] net: freescale: ucc_geth: Move the serdes configuration around Maxime Chevallier
2024-11-14 15:36 ` [PATCH net-next v2 09/10] net: freescale: ucc_geth: Introduce a helper to check Reduced modes Maxime Chevallier
2024-11-14 15:36 ` [PATCH net-next v2 10/10] net: freescale: ucc_geth: phylink conversion Maxime Chevallier
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20241114153603.307872-8-maxime.chevallier@bootlin.com \
--to=maxime.chevallier@bootlin.com \
--cc=andrew@lunn.ch \
--cc=christophe.leroy@csgroup.eu \
--cc=davem@davemloft.net \
--cc=edumazet@google.com \
--cc=herve.codina@bootlin.com \
--cc=hkallweit1@gmail.com \
--cc=kuba@kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux@armlinux.org.uk \
--cc=linuxppc-dev@lists.ozlabs.org \
--cc=netdev@vger.kernel.org \
--cc=pabeni@redhat.com \
--cc=thomas.petazzoni@bootlin.com \
--cc=u.kleine-koenig@baylibre.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).