From: Athira Rajeev <atrajeev@linux.ibm.com>
To: maddy@linux.ibm.com, linuxppc-dev@lists.ozlabs.org
Cc: atrajeev@linux.ibm.com, disgoel@linux.vnet.ibm.com,
hbathini@linux.vnet.ibm.com, Aditya.Bodkhe1@ibm.com,
adubey@linux.ibm.com, skb99@linux.ibm.com, sshegde@linux.ibm.com,
riteshh@linux.ibm.com, Tejas.Manhas1@ibm.com,
venkat88@linux.ibm.com
Subject: [PATCH V3 2/9] powerpc/pseries/htmdump: Add htm configure support to htmdump module
Date: Sun, 20 Apr 2025 23:38:37 +0530 [thread overview]
Message-ID: <20250420180844.53128-3-atrajeev@linux.ibm.com> (raw)
In-Reply-To: <20250420180844.53128-1-atrajeev@linux.ibm.com>
Support configuring of Hardware Trace Macro (HTM) function
via debugfs interface. Under debugfs folder
"/sys/kernel/debug/powerpc/htmdump", add file "htmconfigure".
The interface allows configuring of htm via this file
by writing value "1". Allow deconfiguring of htm via this file
by writing value "0". Any other value returns -EINVAL.
Signed-off-by: Athira Rajeev <atrajeev@linux.ibm.com>
Tested-by: Venkat Rao Bagalkote <venkat88@linux.ibm.com>
---
arch/powerpc/platforms/pseries/htmdump.c | 56 ++++++++++++++++++++++++
1 file changed, 56 insertions(+)
diff --git a/arch/powerpc/platforms/pseries/htmdump.c b/arch/powerpc/platforms/pseries/htmdump.c
index 604fde6a0559..5c1eef1b827a 100644
--- a/arch/powerpc/platforms/pseries/htmdump.c
+++ b/arch/powerpc/platforms/pseries/htmdump.c
@@ -16,7 +16,10 @@ static u32 nodeindex;
static u32 nodalchipindex;
static u32 coreindexonchip;
static u32 htmtype;
+static u32 htmconfigure;
static struct dentry *htmdump_debugfs_dir;
+#define HTM_ENABLE 1
+#define HTM_DISABLE 0
/*
* Check the return code for H_HTM hcall.
@@ -108,6 +111,54 @@ static const struct file_operations htmdump_fops = {
.open = simple_open,
};
+static int htmconfigure_set(void *data, u64 val)
+{
+ long rc, ret;
+
+ /*
+ * value as 1 : configure HTM.
+ * value as 0 : deconfigure HTM. Return -EINVAL for
+ * other values.
+ */
+ if (val == HTM_ENABLE) {
+ /*
+ * Invoke H_HTM call with:
+ * - operation as htm configure (H_HTM_OP_CONFIGURE)
+ * - last three values are unused, hence set to zero
+ */
+ rc = htm_hcall_wrapper(nodeindex, nodalchipindex, coreindexonchip,
+ htmtype, H_HTM_OP_CONFIGURE, 0, 0, 0);
+ } else if (val == HTM_DISABLE) {
+ /*
+ * Invoke H_HTM call with:
+ * - operation as htm deconfigure (H_HTM_OP_DECONFIGURE)
+ * - last three values are unused, hence set to zero
+ */
+ rc = htm_hcall_wrapper(nodeindex, nodalchipindex, coreindexonchip,
+ htmtype, H_HTM_OP_DECONFIGURE, 0, 0, 0);
+ } else
+ return -EINVAL;
+
+ ret = htm_return_check(rc);
+ if (ret <= 0) {
+ pr_debug("H_HTM hcall failed, returning %ld\n", ret);
+ return ret;
+ }
+
+ /* Set htmconfigure if operation succeeds */
+ htmconfigure = val;
+
+ return 0;
+}
+
+static int htmconfigure_get(void *data, u64 *val)
+{
+ *val = htmconfigure;
+ return 0;
+}
+
+DEFINE_SIMPLE_ATTRIBUTE(htmconfigure_fops, htmconfigure_get, htmconfigure_set, "%llu\n");
+
static int htmdump_init_debugfs(void)
{
htm_buf = kmalloc(PAGE_SIZE, GFP_KERNEL);
@@ -129,6 +180,11 @@ static int htmdump_init_debugfs(void)
htmdump_debugfs_dir, &htmtype);
debugfs_create_file("trace", 0400, htmdump_debugfs_dir, htm_buf, &htmdump_fops);
+ /*
+ * Debugfs interface files to control HTM operations:
+ */
+ debugfs_create_file("htmconfigure", 0600, htmdump_debugfs_dir, NULL, &htmconfigure_fops);
+
return 0;
}
--
2.43.0
next prev parent reply other threads:[~2025-04-20 18:09 UTC|newest]
Thread overview: 11+ messages / expand[flat|nested] mbox.gz Atom feed top
2025-04-20 18:08 [PATCH V3 0/9] Add support for configure and control of Hardware Trace Macro(HTM) Athira Rajeev
2025-04-20 18:08 ` [PATCH V3 1/9] powerpc/pseries/htmdump: Add htm_hcall_wrapper to integrate other htm operations Athira Rajeev
2025-04-20 18:08 ` Athira Rajeev [this message]
2025-04-20 18:08 ` [PATCH V3 3/9] powerpc/pseries/htmdump: Add htm start support to htmdump module Athira Rajeev
2025-04-20 18:08 ` [PATCH V3 4/9] powerpc/pseries/htmdump: Add htm status " Athira Rajeev
2025-04-20 18:08 ` [PATCH V3 5/9] powerpc/pseries/htmdump: Add htm info " Athira Rajeev
2025-04-20 18:08 ` [PATCH V3 6/9] powerpc/pseries/htmdump: Add htm setup " Athira Rajeev
2025-04-20 18:08 ` [PATCH V3 7/9] powerpc/pseries/htmdump: Add htm flags " Athira Rajeev
2025-04-20 18:08 ` [PATCH V3 8/9] powerpc/pseries/htmdump: Add htm capabilities " Athira Rajeev
2025-04-20 18:08 ` [PATCH V3 9/9] powerpc/pseries/htmdump: Add documentation for H_HTM debugfs interface Athira Rajeev
2025-05-14 4:03 ` [PATCH V3 0/9] Add support for configure and control of Hardware Trace Macro(HTM) Madhavan Srinivasan
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20250420180844.53128-3-atrajeev@linux.ibm.com \
--to=atrajeev@linux.ibm.com \
--cc=Aditya.Bodkhe1@ibm.com \
--cc=Tejas.Manhas1@ibm.com \
--cc=adubey@linux.ibm.com \
--cc=disgoel@linux.vnet.ibm.com \
--cc=hbathini@linux.vnet.ibm.com \
--cc=linuxppc-dev@lists.ozlabs.org \
--cc=maddy@linux.ibm.com \
--cc=riteshh@linux.ibm.com \
--cc=skb99@linux.ibm.com \
--cc=sshegde@linux.ibm.com \
--cc=venkat88@linux.ibm.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).