From: Bjorn Helgaas <helgaas@kernel.org>
To: linux-pci@vger.kernel.org
Cc: "Jon Pan-Doh" <pandoh@google.com>,
"Karolina Stolarek" <karolina.stolarek@oracle.com>,
"Weinan Liu" <wnliu@google.com>,
"Martin Petersen" <martin.petersen@oracle.com>,
"Ben Fuller" <ben.fuller@oracle.com>,
"Drew Walton" <drewwalton@microsoft.com>,
"Anil Agrawal" <anilagrawal@meta.com>,
"Tony Luck" <tony.luck@intel.com>,
"Ilpo Järvinen" <ilpo.jarvinen@linux.intel.com>,
"Sathyanarayanan Kuppuswamy"
<sathyanarayanan.kuppuswamy@linux.intel.com>,
"Lukas Wunner" <lukas@wunner.de>,
"Jonathan Cameron" <Jonathan.Cameron@huawei.com>,
"Sargun Dhillon" <sargun@meta.com>,
"Paul E . McKenney" <paulmck@kernel.org>,
"Mahesh J Salgaonkar" <mahesh@linux.ibm.com>,
"Oliver O'Halloran" <oohall@gmail.com>,
"Kai-Heng Feng" <kaihengf@nvidia.com>,
"Keith Busch" <kbusch@kernel.org>,
"Robert Richter" <rrichter@amd.com>,
"Terry Bowman" <terry.bowman@amd.com>,
"Shiju Jose" <shiju.jose@huawei.com>,
"Dave Jiang" <dave.jiang@intel.com>,
linux-kernel@vger.kernel.org, linuxppc-dev@lists.ozlabs.org,
"Bjorn Helgaas" <bhelgaas@google.com>
Subject: [PATCH v8 16/20] PCI/AER: Convert aer_get_device_error_info(), aer_print_error() to index
Date: Thu, 22 May 2025 18:21:22 -0500 [thread overview]
Message-ID: <20250522232339.1525671-17-helgaas@kernel.org> (raw)
In-Reply-To: <20250522232339.1525671-1-helgaas@kernel.org>
From: Bjorn Helgaas <bhelgaas@google.com>
Previously aer_get_device_error_info() and aer_print_error() took a pointer
to struct aer_err_info and a pointer to a pci_dev. Typically the pci_dev
was one of the elements of the aer_err_info.dev[] array (DPC was an
exception, where the dev[] array was unused).
Convert aer_get_device_error_info() and aer_print_error() to take an index
into the aer_err_info.dev[] array instead. A future patch will add
per-device ratelimit information, so the index makes it convenient to find
the ratelimit associated with the device.
To accommodate DPC, set info->dev[0] to the DPC port before using these
interfaces.
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
---
drivers/pci/pci.h | 4 ++--
drivers/pci/pcie/aer.c | 33 +++++++++++++++++++++++----------
drivers/pci/pcie/dpc.c | 8 ++++++--
3 files changed, 31 insertions(+), 14 deletions(-)
diff --git a/drivers/pci/pci.h b/drivers/pci/pci.h
index 1a9bfc708757..e1a28215967f 100644
--- a/drivers/pci/pci.h
+++ b/drivers/pci/pci.h
@@ -605,8 +605,8 @@ struct aer_err_info {
struct pcie_tlp_log tlp; /* TLP Header */
};
-int aer_get_device_error_info(struct pci_dev *dev, struct aer_err_info *info);
-void aer_print_error(struct pci_dev *dev, struct aer_err_info *info);
+int aer_get_device_error_info(struct aer_err_info *info, int i);
+void aer_print_error(struct aer_err_info *info, int i);
int pcie_read_tlp_log(struct pci_dev *dev, int where, int where2,
unsigned int tlp_len, bool flit,
diff --git a/drivers/pci/pcie/aer.c b/drivers/pci/pcie/aer.c
index 787a953fb331..237741e66d28 100644
--- a/drivers/pci/pcie/aer.c
+++ b/drivers/pci/pcie/aer.c
@@ -705,12 +705,18 @@ static void aer_print_source(struct pci_dev *dev, struct aer_err_info *info,
found ? "" : " (no details found");
}
-void aer_print_error(struct pci_dev *dev, struct aer_err_info *info)
+void aer_print_error(struct aer_err_info *info, int i)
{
- int layer, agent;
- int id = pci_dev_id(dev);
+ struct pci_dev *dev;
+ int layer, agent, id;
const char *level = info->level;
+ if (i >= AER_MAX_MULTI_ERR_DEVICES)
+ return;
+
+ dev = info->dev[i];
+ id = pci_dev_id(dev);
+
pci_dev_aer_stats_incr(dev, info);
trace_aer_event(pci_name(dev), (info->status & ~info->mask),
info->severity, info->tlp_header_valid, &info->tlp);
@@ -1193,19 +1199,26 @@ EXPORT_SYMBOL_GPL(aer_recover_queue);
/**
* aer_get_device_error_info - read error status from dev and store it to info
- * @dev: pointer to the device expected to have an error record
* @info: pointer to structure to store the error record
+ * @i: index into info->dev[]
*
* Return: 1 on success, 0 on error.
*
* Note that @info is reused among all error devices. Clear fields properly.
*/
-int aer_get_device_error_info(struct pci_dev *dev, struct aer_err_info *info)
+int aer_get_device_error_info(struct aer_err_info *info, int i)
{
- int type = pci_pcie_type(dev);
- int aer = dev->aer_cap;
+ struct pci_dev *dev;
+ int type, aer;
u32 aercc;
+ if (i >= AER_MAX_MULTI_ERR_DEVICES)
+ return 0;
+
+ dev = info->dev[i];
+ aer = dev->aer_cap;
+ type = pci_pcie_type(dev);
+
/* Must reset in this function */
info->status = 0;
info->tlp_header_valid = 0;
@@ -1257,11 +1270,11 @@ static inline void aer_process_err_devices(struct aer_err_info *e_info)
/* Report all before handling them, to not lose records by reset etc. */
for (i = 0; i < e_info->error_dev_num && e_info->dev[i]; i++) {
- if (aer_get_device_error_info(e_info->dev[i], e_info))
- aer_print_error(e_info->dev[i], e_info);
+ if (aer_get_device_error_info(e_info, i))
+ aer_print_error(e_info, i);
}
for (i = 0; i < e_info->error_dev_num && e_info->dev[i]; i++) {
- if (aer_get_device_error_info(e_info->dev[i], e_info))
+ if (aer_get_device_error_info(e_info, i))
handle_error_source(e_info->dev[i], e_info);
}
}
diff --git a/drivers/pci/pcie/dpc.c b/drivers/pci/pcie/dpc.c
index 7ae1590ea1da..fc18349614d7 100644
--- a/drivers/pci/pcie/dpc.c
+++ b/drivers/pci/pcie/dpc.c
@@ -253,6 +253,10 @@ static int dpc_get_aer_uncorrect_severity(struct pci_dev *dev,
info->severity = AER_NONFATAL;
info->level = KERN_ERR;
+
+ info->dev[0] = dev;
+ info->error_dev_num = 1;
+
return 1;
}
@@ -270,8 +274,8 @@ void dpc_process_error(struct pci_dev *pdev)
pci_warn(pdev, "containment event, status:%#06x: unmasked uncorrectable error detected\n",
status);
if (dpc_get_aer_uncorrect_severity(pdev, &info) &&
- aer_get_device_error_info(pdev, &info)) {
- aer_print_error(pdev, &info);
+ aer_get_device_error_info(&info, 0)) {
+ aer_print_error(&info, 0);
pci_aer_clear_nonfatal_status(pdev);
pci_aer_clear_fatal_status(pdev);
}
--
2.43.0
next prev parent reply other threads:[~2025-05-22 23:25 UTC|newest]
Thread overview: 38+ messages / expand[flat|nested] mbox.gz Atom feed top
2025-05-22 23:21 [PATCH v8 00/20] Rate limit AER logs Bjorn Helgaas
2025-05-22 23:21 ` [PATCH v8 01/20] PCI/DPC: Initialize aer_err_info before using it Bjorn Helgaas
2025-05-22 23:21 ` [PATCH v8 02/20] PCI/DPC: Log Error Source ID only when valid Bjorn Helgaas
2025-05-22 23:21 ` [PATCH v8 03/20] PCI/AER: Factor COR/UNCOR error handling out from aer_isr_one_error() Bjorn Helgaas
2025-05-22 23:21 ` [PATCH v8 04/20] PCI/AER: Consolidate Error Source ID logging in aer_isr_one_error_type() Bjorn Helgaas
2025-05-22 23:21 ` [PATCH v8 05/20] PCI/AER: Extract bus/dev/fn in aer_print_port_info() with PCI_BUS_NUM(), etc Bjorn Helgaas
2025-05-22 23:21 ` [PATCH v8 06/20] PCI/AER: Rename aer_print_port_info() to aer_print_source() Bjorn Helgaas
2025-05-22 23:21 ` [PATCH v8 07/20] PCI/AER: Move aer_print_source() earlier in file Bjorn Helgaas
2025-05-22 23:21 ` [PATCH v8 08/20] PCI/AER: Initialize aer_err_info before using it Bjorn Helgaas
2025-05-22 23:21 ` [PATCH v8 09/20] PCI/AER: Simplify pci_print_aer() Bjorn Helgaas
2025-05-22 23:21 ` [PATCH v8 10/20] PCI/AER: Update statistics before ratelimiting Bjorn Helgaas
2025-05-22 23:21 ` [PATCH v8 11/20] PCI/AER: Trace error event " Bjorn Helgaas
2025-05-22 23:21 ` [PATCH v8 12/20] PCI/AER: Check log level once and remember it Bjorn Helgaas
2025-05-22 23:21 ` [PATCH v8 13/20] PCI/ERR: Add printk level to pcie_print_tlp_log() Bjorn Helgaas
2025-05-22 23:44 ` Sathyanarayanan Kuppuswamy
2025-05-23 9:56 ` Ilpo Järvinen
2025-05-28 6:38 ` Lukas Wunner
2025-05-28 10:00 ` Ilpo Järvinen
2025-05-22 23:21 ` [PATCH v8 14/20] PCI/AER: Reduce pci_print_aer() correctable error level to KERN_WARNING Bjorn Helgaas
2025-05-22 23:21 ` [PATCH v8 15/20] PCI/AER: Rename struct aer_stats to aer_info Bjorn Helgaas
2025-05-22 23:21 ` Bjorn Helgaas [this message]
2025-05-22 23:58 ` [PATCH v8 16/20] PCI/AER: Convert aer_get_device_error_info(), aer_print_error() to index Sathyanarayanan Kuppuswamy
2025-05-23 11:13 ` Ilpo Järvinen
2025-05-23 16:12 ` Bjorn Helgaas
2025-05-22 23:21 ` [PATCH v8 17/20] PCI/AER: Simplify add_error_device() Bjorn Helgaas
2025-05-22 23:57 ` Sathyanarayanan Kuppuswamy
2025-05-23 11:14 ` Ilpo Järvinen
2025-05-22 23:21 ` [PATCH v8 18/20] PCI/AER: Ratelimit correctable and non-fatal error logging Bjorn Helgaas
2025-05-22 23:56 ` Sathyanarayanan Kuppuswamy
2025-05-23 16:06 ` Bjorn Helgaas
2025-08-01 13:16 ` Breno Leitao
2025-08-01 13:35 ` Breno Leitao
2025-10-01 21:38 ` Bjorn Helgaas
2025-10-02 9:08 ` Breno Leitao
2025-05-22 23:21 ` [PATCH v8 19/20] PCI/AER: Add ratelimits to PCI AER Documentation Bjorn Helgaas
2025-05-22 23:21 ` [PATCH v8 20/20] PCI/AER: Add sysfs attributes for log ratelimits Bjorn Helgaas
2025-05-22 23:50 ` Sathyanarayanan Kuppuswamy
2025-05-23 16:21 ` [PATCH v8 00/20] Rate limit AER logs Bjorn Helgaas
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20250522232339.1525671-17-helgaas@kernel.org \
--to=helgaas@kernel.org \
--cc=Jonathan.Cameron@huawei.com \
--cc=anilagrawal@meta.com \
--cc=ben.fuller@oracle.com \
--cc=bhelgaas@google.com \
--cc=dave.jiang@intel.com \
--cc=drewwalton@microsoft.com \
--cc=ilpo.jarvinen@linux.intel.com \
--cc=kaihengf@nvidia.com \
--cc=karolina.stolarek@oracle.com \
--cc=kbusch@kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-pci@vger.kernel.org \
--cc=linuxppc-dev@lists.ozlabs.org \
--cc=lukas@wunner.de \
--cc=mahesh@linux.ibm.com \
--cc=martin.petersen@oracle.com \
--cc=oohall@gmail.com \
--cc=pandoh@google.com \
--cc=paulmck@kernel.org \
--cc=rrichter@amd.com \
--cc=sargun@meta.com \
--cc=sathyanarayanan.kuppuswamy@linux.intel.com \
--cc=shiju.jose@huawei.com \
--cc=terry.bowman@amd.com \
--cc=tony.luck@intel.com \
--cc=wnliu@google.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).