From: Shengjiu Wang <shengjiu.wang@nxp.com>
To: lgirdwood@gmail.com, broonie@kernel.org, robh@kernel.org,
krzk+dt@kernel.org, conor+dt@kernel.org, shawnguo@kernel.org,
s.hauer@pengutronix.de, kernel@pengutronix.de,
festevam@gmail.com, linux-sound@vger.kernel.org,
devicetree@vger.kernel.org, imx@lists.linux.dev,
linux-arm-kernel@lists.infradead.org,
linux-kernel@vger.kernel.org, shengjiu.wang@gmail.com,
Xiubo.Lee@gmail.com, nicoleotsuka@gmail.com, perex@perex.cz,
tiwai@suse.com, linuxppc-dev@lists.ozlabs.org
Subject: [PATCH v2 3/4] ASoC: fsl_asrc_m2m: Start ASRC before DMA device for M2M
Date: Fri, 30 Jan 2026 13:43:29 +0800 [thread overview]
Message-ID: <20260130054330.3462544-4-shengjiu.wang@nxp.com> (raw)
In-Reply-To: <20260130054330.3462544-1-shengjiu.wang@nxp.com>
There is a limitation on i.MX952 that dma request is not cleared at the
end of conversion with dma slave mode. Which causes sample is dropped
from the input fifo on the second time if dma is triggered before the
client device and EDMA may copy wrong data from output fifo as the output
fifo is not ready in the beginning.
So need to trigger asrc before dma on i.MX952, and add delay to wait
output data is generated then start the EDMA for output, otherwise the
m2m function has noise issues.
Signed-off-by: Shengjiu Wang <shengjiu.wang@nxp.com>
---
sound/soc/fsl/fsl_asrc.c | 25 +++++++++++++++++++++++++
sound/soc/fsl/fsl_asrc.h | 2 ++
sound/soc/fsl/fsl_asrc_common.h | 4 ++++
sound/soc/fsl/fsl_asrc_m2m.c | 29 +++++++++++++++++++++--------
4 files changed, 52 insertions(+), 8 deletions(-)
diff --git a/sound/soc/fsl/fsl_asrc.c b/sound/soc/fsl/fsl_asrc.c
index 5846a2b1f73c..2374577c13f9 100644
--- a/sound/soc/fsl/fsl_asrc.c
+++ b/sound/soc/fsl/fsl_asrc.c
@@ -1084,6 +1084,28 @@ static unsigned int fsl_asrc_get_output_fifo_size(struct fsl_asrc_pair *pair)
return val >> ASRFSTi_OUTPUT_FIFO_SHIFT;
}
+static bool fsl_asrc_m2m_output_ready(struct fsl_asrc_pair *pair)
+{
+ struct fsl_asrc *asrc = pair->asrc;
+ enum asrc_pair_index index = pair->index;
+ int retry = 1000;
+ u32 val;
+
+ /* Check output fifo status if it exceeds the watermark. */
+ do {
+ regmap_read(asrc->regmap, REG_ASRFST(index), &val);
+ val &= ASRFSTi_OUTPUT_FIFO_MASK;
+ val = val >> ASRFSTi_OUTPUT_FIFO_SHIFT;
+ } while (val < ASRC_M2M_OUTPUTFIFO_WML && --retry);
+
+ if (!retry) {
+ pair_warn("output is not ready\n");
+ return false;
+ }
+
+ return true;
+}
+
static int fsl_asrc_m2m_prepare(struct fsl_asrc_pair *pair)
{
struct fsl_asrc_pair_priv *pair_priv = pair->private;
@@ -1281,6 +1303,7 @@ static int fsl_asrc_probe(struct platform_device *pdev)
asrc_priv->soc = of_device_get_match_data(&pdev->dev);
asrc->use_edma = asrc_priv->soc->use_edma;
+ asrc->start_before_dma = asrc_priv->soc->start_before_dma;
asrc->get_dma_channel = fsl_asrc_get_dma_channel;
asrc->request_pair = fsl_asrc_request_pair;
asrc->release_pair = fsl_asrc_release_pair;
@@ -1295,6 +1318,7 @@ static int fsl_asrc_probe(struct platform_device *pdev)
asrc->m2m_get_maxburst = fsl_asrc_m2m_get_maxburst;
asrc->m2m_pair_resume = fsl_asrc_m2m_pair_resume;
asrc->m2m_get_cap = fsl_asrc_m2m_get_cap;
+ asrc->m2m_output_ready = fsl_asrc_m2m_output_ready;
if (of_device_is_compatible(np, "fsl,imx35-asrc")) {
asrc_priv->clk_map[IN] = input_clk_map_imx35;
@@ -1565,6 +1589,7 @@ static const struct fsl_asrc_soc_data fsl_asrc_imx8qxp_data = {
static const struct fsl_asrc_soc_data fsl_asrc_imx952_data = {
.use_edma = true,
.channel_bits = 4,
+ .start_before_dma = true,
};
static const struct of_device_id fsl_asrc_ids[] = {
diff --git a/sound/soc/fsl/fsl_asrc.h b/sound/soc/fsl/fsl_asrc.h
index 2f67b085de24..1be93148a879 100644
--- a/sound/soc/fsl/fsl_asrc.h
+++ b/sound/soc/fsl/fsl_asrc.h
@@ -446,10 +446,12 @@ struct dma_block {
*
* @use_edma: using edma as dma device or not
* @channel_bits: width of ASRCNCR register for each pair
+ * @start_before_dma: start asrc before dma
*/
struct fsl_asrc_soc_data {
bool use_edma;
unsigned int channel_bits;
+ bool start_before_dma;
};
/**
diff --git a/sound/soc/fsl/fsl_asrc_common.h b/sound/soc/fsl/fsl_asrc_common.h
index 0cd595b0f629..c8a1a2b5915d 100644
--- a/sound/soc/fsl/fsl_asrc_common.h
+++ b/sound/soc/fsl/fsl_asrc_common.h
@@ -107,6 +107,7 @@ struct fsl_asrc_pair {
* @asrc_rate: default sample rate for ASoC Back-Ends
* @asrc_format: default sample format for ASoC Back-Ends
* @use_edma: edma is used
+ * @start_before_dma: start asrc before dma
* @get_dma_channel: function pointer
* @request_pair: function pointer
* @release_pair: function pointer
@@ -116,6 +117,7 @@ struct fsl_asrc_pair {
* @m2m_start: function pointer
* @m2m_unprepare: function pointer
* @m2m_stop: function pointer
+ * @m2m_output_ready: function pointer, check output fifo ready or not
* @m2m_calc_out_len: function pointer
* @m2m_get_maxburst: function pointer
* @m2m_pair_suspend: function pointer
@@ -143,6 +145,7 @@ struct fsl_asrc {
int asrc_rate;
snd_pcm_format_t asrc_format;
bool use_edma;
+ bool start_before_dma;
struct dma_chan *(*get_dma_channel)(struct fsl_asrc_pair *pair, bool dir);
int (*request_pair)(int channels, struct fsl_asrc_pair *pair);
@@ -154,6 +157,7 @@ struct fsl_asrc {
int (*m2m_start)(struct fsl_asrc_pair *pair);
int (*m2m_unprepare)(struct fsl_asrc_pair *pair);
int (*m2m_stop)(struct fsl_asrc_pair *pair);
+ bool (*m2m_output_ready)(struct fsl_asrc_pair *pair);
int (*m2m_calc_out_len)(struct fsl_asrc_pair *pair, int input_buffer_length);
int (*m2m_get_maxburst)(u8 dir, struct fsl_asrc_pair *pair);
diff --git a/sound/soc/fsl/fsl_asrc_m2m.c b/sound/soc/fsl/fsl_asrc_m2m.c
index f46881f71e43..296e13a16490 100644
--- a/sound/soc/fsl/fsl_asrc_m2m.c
+++ b/sound/soc/fsl/fsl_asrc_m2m.c
@@ -253,15 +253,28 @@ static int asrc_m2m_device_run(struct fsl_asrc_pair *pair, struct snd_compr_task
reinit_completion(&pair->complete[IN]);
reinit_completion(&pair->complete[OUT]);
- /* Submit DMA request */
- dmaengine_submit(pair->desc[IN]);
- dma_async_issue_pending(pair->desc[IN]->chan);
- if (out_dma_len > 0) {
- dmaengine_submit(pair->desc[OUT]);
- dma_async_issue_pending(pair->desc[OUT]->chan);
- }
+ if (asrc->start_before_dma) {
+ asrc->m2m_start(pair);
+ /* Submit DMA request */
+ dmaengine_submit(pair->desc[IN]);
+ dma_async_issue_pending(pair->desc[IN]->chan);
+ if (out_dma_len > 0) {
+ if (asrc->m2m_output_ready)
+ asrc->m2m_output_ready(pair);
+ dmaengine_submit(pair->desc[OUT]);
+ dma_async_issue_pending(pair->desc[OUT]->chan);
+ }
+ } else {
+ /* Submit DMA request */
+ dmaengine_submit(pair->desc[IN]);
+ dma_async_issue_pending(pair->desc[IN]->chan);
+ if (out_dma_len > 0) {
+ dmaengine_submit(pair->desc[OUT]);
+ dma_async_issue_pending(pair->desc[OUT]->chan);
+ }
- asrc->m2m_start(pair);
+ asrc->m2m_start(pair);
+ }
if (!wait_for_completion_interruptible_timeout(&pair->complete[IN], 10 * HZ)) {
dev_err(dev, "out DMA task timeout\n");
--
2.34.1
next prev parent reply other threads:[~2026-01-30 5:44 UTC|newest]
Thread overview: 10+ messages / expand[flat|nested] mbox.gz Atom feed top
2026-01-30 5:43 [PATCH v2 0/4] ASoC: fsl_asrc: support the i.MX952 platform Shengjiu Wang
2026-01-30 5:43 ` [PATCH v2 1/4] ASoC: dt-bindings: fsl,imx-asrc: Add support for " Shengjiu Wang
2026-01-30 7:20 ` Daniel Baluta
2026-01-30 5:43 ` [PATCH v2 2/4] ASoC: fsl_asrc: " Shengjiu Wang
2026-01-30 7:27 ` Daniel Baluta
2026-01-30 8:24 ` Shengjiu Wang
2026-01-30 5:43 ` Shengjiu Wang [this message]
2026-01-30 14:43 ` [PATCH v2 3/4] ASoC: fsl_asrc_m2m: Start ASRC before DMA device for M2M Frank Li
2026-02-02 9:44 ` Shengjiu Wang
2026-01-30 5:43 ` [PATCH v2 4/4] ASoC: fsl_asrc_dma: allocate memory from dma device Shengjiu Wang
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20260130054330.3462544-4-shengjiu.wang@nxp.com \
--to=shengjiu.wang@nxp.com \
--cc=Xiubo.Lee@gmail.com \
--cc=broonie@kernel.org \
--cc=conor+dt@kernel.org \
--cc=devicetree@vger.kernel.org \
--cc=festevam@gmail.com \
--cc=imx@lists.linux.dev \
--cc=kernel@pengutronix.de \
--cc=krzk+dt@kernel.org \
--cc=lgirdwood@gmail.com \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-sound@vger.kernel.org \
--cc=linuxppc-dev@lists.ozlabs.org \
--cc=nicoleotsuka@gmail.com \
--cc=perex@perex.cz \
--cc=robh@kernel.org \
--cc=s.hauer@pengutronix.de \
--cc=shawnguo@kernel.org \
--cc=shengjiu.wang@gmail.com \
--cc=tiwai@suse.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox