public inbox for linuxppc-dev@ozlabs.org
 help / color / mirror / Atom feed
From: Adriano Vero <litaliano00.contact@gmail.com>
To: maddy@linux.ibm.com, mpe@ellerman.id.au
Cc: npiggin@gmail.com, chleroy@kernel.org,
	linuxppc-dev@lists.ozlabs.org, linux-kernel@vger.kernel.org,
	Adriano Vero <litaliano00.contact@gmail.com>
Subject: [PATCH] powerpc/fadump: Add timeout to RTAS busy-wait loops
Date: Mon,  6 Apr 2026 08:15:42 +0200	[thread overview]
Message-ID: <20260406061542.22354-1-litaliano00.contact@gmail.com> (raw)

The ibm,configure-kernel-dump RTAS call sites in
rtas_fadump_register(), rtas_fadump_unregister(), and
rtas_fadump_invalidate() polled indefinitely while firmware returned
a busy status. A misbehaving or hung firmware could stall these paths
forever, blocking fadump registration at boot or preventing clean
teardown.

Track the accumulated delay in a total_wait counter and bail out with
-ETIMEDOUT if it reaches RTAS_FADUMP_MAX_WAIT_MS (60 seconds) before
firmware signals completion. This follows the bounded busy-wait pattern
used in rtas-rtc.c.

Signed-off-by: Adriano Vero <litaliano00.contact@gmail.com>
---
 arch/powerpc/platforms/pseries/rtas-fadump.c | 37 ++++++++++++++------
 arch/powerpc/platforms/pseries/rtas-fadump.h |  6 ++++
 2 files changed, 33 insertions(+), 10 deletions(-)

diff --git a/arch/powerpc/platforms/pseries/rtas-fadump.c b/arch/powerpc/platforms/pseries/rtas-fadump.c
index eceb32893..b165f165c 100644
--- a/arch/powerpc/platforms/pseries/rtas-fadump.c
+++ b/arch/powerpc/platforms/pseries/rtas-fadump.c
@@ -181,7 +181,7 @@ static u64 rtas_fadump_get_bootmem_min(void)
 
 static int rtas_fadump_register(struct fw_dump *fadump_conf)
 {
-	unsigned int wait_time, fdm_size;
+	unsigned int wait_time, total_wait, fdm_size;
 	int rc, err = -EIO;
 
 	/*
@@ -192,15 +192,20 @@ static int rtas_fadump_register(struct fw_dump *fadump_conf)
 	fdm_size = sizeof(struct rtas_fadump_section_header);
 	fdm_size += be16_to_cpu(fdm.header.dump_num_sections) * sizeof(struct rtas_fadump_section);
 
-	/* TODO: Add upper time limit for the delay */
+	total_wait = 0;
 	do {
 		rc =  rtas_call(fadump_conf->ibm_configure_kernel_dump, 3, 1,
 				NULL, FADUMP_REGISTER, &fdm, fdm_size);
 
 		wait_time = rtas_busy_delay_time(rc);
-		if (wait_time)
+		if (wait_time) {
+			if (total_wait >= RTAS_FADUMP_MAX_WAIT_MS) {
+				pr_err("Timed out waiting for firmware to register fadump\n");
+				return -ETIMEDOUT;
+			}
+			total_wait += wait_time;
 			mdelay(wait_time);
-
+		}
 	} while (wait_time);
 
 	switch (rc) {
@@ -234,18 +239,24 @@ static int rtas_fadump_register(struct fw_dump *fadump_conf)
 
 static int rtas_fadump_unregister(struct fw_dump *fadump_conf)
 {
-	unsigned int wait_time;
+	unsigned int wait_time, total_wait;
 	int rc;
 
-	/* TODO: Add upper time limit for the delay */
+	total_wait = 0;
 	do {
 		rc =  rtas_call(fadump_conf->ibm_configure_kernel_dump, 3, 1,
 				NULL, FADUMP_UNREGISTER, &fdm,
 				sizeof(struct rtas_fadump_mem_struct));
 
 		wait_time = rtas_busy_delay_time(rc);
-		if (wait_time)
+		if (wait_time) {
+			if (total_wait >= RTAS_FADUMP_MAX_WAIT_MS) {
+				pr_err("Timed out waiting for firmware to unregister fadump\n");
+				return -ETIMEDOUT;
+			}
+			total_wait += wait_time;
 			mdelay(wait_time);
+		}
 	} while (wait_time);
 
 	if (rc) {
@@ -259,18 +270,24 @@ static int rtas_fadump_unregister(struct fw_dump *fadump_conf)
 
 static int rtas_fadump_invalidate(struct fw_dump *fadump_conf)
 {
-	unsigned int wait_time;
+	unsigned int wait_time, total_wait;
 	int rc;
 
-	/* TODO: Add upper time limit for the delay */
+	total_wait = 0;
 	do {
 		rc =  rtas_call(fadump_conf->ibm_configure_kernel_dump, 3, 1,
 				NULL, FADUMP_INVALIDATE, fdm_active,
 				sizeof(struct rtas_fadump_mem_struct));
 
 		wait_time = rtas_busy_delay_time(rc);
-		if (wait_time)
+		if (wait_time) {
+			if (total_wait >= RTAS_FADUMP_MAX_WAIT_MS) {
+				pr_err("Timed out waiting for firmware to invalidate fadump\n");
+				return -ETIMEDOUT;
+			}
+			total_wait += wait_time;
 			mdelay(wait_time);
+		}
 	} while (wait_time);
 
 	if (rc) {
diff --git a/arch/powerpc/platforms/pseries/rtas-fadump.h b/arch/powerpc/platforms/pseries/rtas-fadump.h
index c109abf6b..65fdab7b5 100644
--- a/arch/powerpc/platforms/pseries/rtas-fadump.h
+++ b/arch/powerpc/platforms/pseries/rtas-fadump.h
@@ -41,6 +41,12 @@
 #define MAX_SECTIONS				10
 #define RTAS_FADUMP_MAX_BOOT_MEM_REGS		7
 
+/*
+ * Maximum time to wait for firmware to respond to an
+ * ibm,configure-kernel-dump RTAS call before giving up.
+ */
+#define RTAS_FADUMP_MAX_WAIT_MS			60000U
+
 /* Kernel Dump section info */
 struct rtas_fadump_section {
 	__be32	request_flag;
-- 
2.53.0



             reply	other threads:[~2026-04-06  6:40 UTC|newest]

Thread overview: 3+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2026-04-06  6:15 Adriano Vero [this message]
2026-04-07  4:06 ` [PATCH] powerpc/fadump: Add timeout to RTAS busy-wait loops Ritesh Harjani
2026-04-07  6:28   ` litaliano00

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20260406061542.22354-1-litaliano00.contact@gmail.com \
    --to=litaliano00.contact@gmail.com \
    --cc=chleroy@kernel.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linuxppc-dev@lists.ozlabs.org \
    --cc=maddy@linux.ibm.com \
    --cc=mpe@ellerman.id.au \
    --cc=npiggin@gmail.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox