From: Chinmay Rath <rathc@linux.ibm.com>
To: thuth@redhat.com
Cc: npiggin@gmail.com, harshpb@linux.ibm.com, lvivier@redhat.com,
linuxppc-dev@lists.ozlabs.org, kvm@vger.kernel.org,
andrew.jones@linux.dev, sbhat@linux.ibm.com,
Chinmay Rath <rathc@linux.ibm.com>
Subject: [kvm-unit-tests RFC PATCH 2/6] configure: Make arch_libdir a first-class entity
Date: Tue, 2 Jun 2026 12:18:02 +0530 [thread overview]
Message-ID: <20260602064806.3101025-3-rathc@linux.ibm.com> (raw)
In-Reply-To: <20260602064806.3101025-1-rathc@linux.ibm.com>
From: Nicholas Piggin <npiggin@gmail.com>
arch_libdir was brought in to improve the heuristic determination of
the lib/ directory based on arch and testdir names, but it did not
entirely clean that mess up.
Remove the arch_libdir->arch->testdir heuristic and just require
everybody sets arch_libdir correctly. Fail if the lib/arch or
lib/arch/asm directories can not be found.
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
Signed-off-by: Chinmay Rath <rathc@linux.ibm.com>
---
Makefile | 2 +-
configure | 20 ++++++++++++--------
2 files changed, 13 insertions(+), 9 deletions(-)
diff --git a/Makefile b/Makefile
index 42ef5826..8e002043 100644
--- a/Makefile
+++ b/Makefile
@@ -12,7 +12,7 @@ vpath %.s $(SRCDIR)
vpath %.S $(SRCDIR)
libdirs-get = $(shell [ -d "lib/$(1)" ] && echo "lib/$(1) lib/$(1)/asm")
-ARCH_LIBDIRS := $(call libdirs-get,$(ARCH_LIBDIR)) $(call libdirs-get,$(TEST_DIR))
+ARCH_LIBDIRS := $(call libdirs-get,$(ARCH_LIBDIR))
OBJDIRS := $(ARCH_LIBDIRS)
DESTDIR := $(PREFIX)/share/kvm-unit-tests/
diff --git a/configure b/configure
index 6d549d1e..aeb5570c 100755
--- a/configure
+++ b/configure
@@ -274,7 +274,6 @@ fi
arch_name=$arch
[ "$arch" = "aarch64" ] && arch="arm64"
[ "$arch_name" = "arm64" ] && arch_name="aarch64"
-arch_libdir=$arch
if [ "$arch" = "riscv" ]; then
echo "riscv32 or riscv64 must be specified"
@@ -373,8 +372,10 @@ fi
if [ "$arch" = "i386" ] || [ "$arch" = "x86_64" ]; then
testdir=x86
+ arch_libdir=x86
elif [ "$arch" = "arm" ] || [ "$arch" = "arm64" ]; then
testdir=arm
+ arch_libdir=$arch
if [ "$target" = "qemu" ]; then
: "${uart_early_addr:=0x9000000}"
elif [ "$target" = "kvmtool" ]; then
@@ -385,6 +386,7 @@ elif [ "$arch" = "arm" ] || [ "$arch" = "arm64" ]; then
fi
elif [ "$arch" = "ppc64" ]; then
testdir=powerpc
+ arch_libdir=ppc64
firmware="$testdir/boot_rom.bin"
if [ "$endian" != "little" ] && [ "$endian" != "big" ]; then
echo "You must provide endianness (big or little)!"
@@ -400,6 +402,7 @@ elif [ "$arch" = "riscv32" ] || [ "$arch" = "riscv64" ]; then
fi
elif [ "$arch" = "s390x" ]; then
testdir=s390x
+ arch_libdir=s390x
else
echo "arch $arch is not supported!"
arch=
@@ -409,6 +412,10 @@ if [ ! -d "$srcdir/$testdir" ]; then
echo "$srcdir/$testdir does not exist!"
exit 1
fi
+if [ ! -d "$srcdir/lib/$arch_libdir" ]; then
+ echo "$srcdir/lib/$arch_libdir does not exist!"
+ exit 1
+fi
if [ "$efi" = "y" ] && [ -f "$srcdir/$testdir/efi/run" ]; then
ln -fs "$srcdir/$testdir/efi/run" $testdir-run
@@ -471,15 +478,12 @@ fi
# link lib/asm for the architecture
rm -f lib/asm
asm="asm-generic"
-if [ -d "$srcdir/lib/$arch/asm" ]; then
- asm="$srcdir/lib/$arch/asm"
- mkdir -p "lib/$arch"
-elif [ -d "$srcdir/lib/$arch_libdir/asm" ]; then
+if [ -d "$srcdir/lib/$arch_libdir/asm" ]; then
asm="$srcdir/lib/$arch_libdir/asm"
mkdir -p "lib/$arch_libdir"
-elif [ -d "$srcdir/lib/$testdir/asm" ]; then
- asm="$srcdir/lib/$testdir/asm"
- mkdir -p "lib/$testdir"
+else
+ echo "$srcdir/lib/$arch_libdir/asm does not exist"
+ exit 1
fi
ln -sf "$asm" lib/asm
mkdir -p lib/generated lib/libfdt
--
2.53.0
next prev parent reply other threads:[~2026-06-02 10:05 UTC|newest]
Thread overview: 12+ messages / expand[flat|nested] mbox.gz Atom feed top
2026-06-02 6:48 [kvm-unit-tests RFC PATCH 0/6] powerpc improvements Chinmay Rath
2026-06-02 6:48 ` [kvm-unit-tests RFC PATCH 1/6] powerpc: add pmu tests Chinmay Rath
2026-06-08 12:45 ` Thomas Huth
2026-06-08 13:57 ` Thomas Huth
2026-06-02 6:48 ` Chinmay Rath [this message]
2026-06-02 15:54 ` [kvm-unit-tests RFC PATCH 2/6] configure: Make arch_libdir a first-class entity Andrew Jones
2026-06-05 8:34 ` Chinmay Rath
2026-06-02 6:48 ` [kvm-unit-tests RFC PATCH 3/6] powerpc: Remove remnants of ppc64 directory and build structure Chinmay Rath
2026-06-02 6:48 ` [kvm-unit-tests RFC PATCH 4/6] powerpc: gitlab CI update Chinmay Rath
2026-06-08 12:48 ` Thomas Huth
2026-06-02 6:48 ` [kvm-unit-tests RFC PATCH 5/6] scripts/arch-run.bash: Fix run_panic() success exit status Chinmay Rath
2026-06-02 6:48 ` [kvm-unit-tests RFC PATCH 6/6] powerpc: Add a panic test Chinmay Rath
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20260602064806.3101025-3-rathc@linux.ibm.com \
--to=rathc@linux.ibm.com \
--cc=andrew.jones@linux.dev \
--cc=harshpb@linux.ibm.com \
--cc=kvm@vger.kernel.org \
--cc=linuxppc-dev@lists.ozlabs.org \
--cc=lvivier@redhat.com \
--cc=npiggin@gmail.com \
--cc=sbhat@linux.ibm.com \
--cc=thuth@redhat.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox