[PATCH v3] KVM: PPC: Book3S HV: Validate arch_compat against host compatibility mode

[Amit Machhiwal <amachhiw@linux.ibm.com>]

On IBM POWER systems, newer processor generations can operate in
compatibility modes corresponding to earlier generations. This becomes
relevant for nested virtualization, where nested KVM guests may need to
run with a specific processor compatibility level.

Currently, when running a nested KVM guest (L2) inside a Power11 pSeries
logical partition (L1) booted in Power10 compatibility mode, the guest
fails to boot while setting 'arch_compat'. This happens because the CPU
class is derived from the hardware PVR (via mfspr()), which reflects the
physical processor generation (Power11), rather than the effective
compatibility mode (Power10).

As a result, userspace may request a Power11 arch_compat for the L2
guest. However, the L1 partition, running in Power10 compatibility, has
only negotiated support up to Power10 with the Power Hypervisor (L0).
When H_GUEST_SET_STATE is invoked with a Power11 Logical PVR, the
hypervisor rejects the request, leading to a late guest boot failure:

  KVM-NESTEDv2: couldn't set guest wide elements
  [..KVM reg dump..]

This situation should be detected earlier and rejected by KVM. Without
proper validation, if userspace ignores the error, the guest may continue
to boot in Power11 raw mode on a Power10 compatibility host, which should
not be allowed.

Introduce a validation mechanism that detects unsupported arch_compat
values early in the guest initialization path. When an unsupported
arch_compat is requested (e.g., Power11 on a Power10 compatibility mode
host), kvmppc_set_arch_compat() uses cpu_has_feature(CPU_FTR_P11_PVR) to
detect the mismatch and sets arch_compat to PVR_ARCH_INVALID. This
triggers kvmppc_sanity_check() to mark the vCPU as invalid by setting
vcpu->arch.sane to false. On the next vCPU run, kvmppc_vcpu_run_hv()
checks this flag and returns -EINVAL, preventing the guest from running
with an invalid processor compatibility configuration.

With this, when a Power11 arch_compat is requested on a Power10
compatibility mode host, the guest fails early during boot with:

  error: kvm run failed Invalid argument

This provides a much clearer failure mode compared to the previous
behavior where the guest could boot in Power11 raw mode (if userspace
ignored the error) or fail late during H_GUEST_SET_STATE.

Suggested-by: Vaibhav Jain <vaibhav@linux.ibm.com>
Reviewed-by: Vaibhav Jain <vaibhav@linux.ibm.com>
Cc: stable@vger.kernel.org # v6.13+
Signed-off-by: Amit Machhiwal <amachhiw@linux.ibm.com>
---
Changes in v3:
* Fixed null pointer dereference in kvmppc_sanity_check(): added check for
  vcpu->arch.vcore before accessing arch_compat, as vcore is NULL for Book3S
  PR and BookE guests (only Book3S HV uses vcore) [Reported by Sashiko AI]
* Added Reviewed-by tag from Vaibhav

Changes in v2:
* Fixed issue where v1 allowed guest to boot in Power11 raw mode when
  userspace ignored the error, by adding validation in kvmppc_sanity_check()
  to ensure early failure during vCPU run [Found the issue after posting v1,
  also reported by Gautam.]
* Introduced PVR_ARCH_INVALID constant for marking invalid arch_compat
* Dropped all Reviewed-by and Tested-by tags due to code changes; requesting
  fresh reviews
* v1: https://lore.kernel.org/all/20260603141539.47620-1-amachhiw@linux.ibm.com/

Changes in v1:
* Moved this patch out of the v3 series [1] as discussed here [2]
* Addressed below review comments from Ritesh:
  - Based the PVR validation on cpu features
  - Fixed hcall name typo
  - Stable backport

[1] https://lore.kernel.org/all/20260522152744.55251-1-amachhiw@linux.ibm.com/
[2] https://lore.kernel.org/all/20260522152744.55251-2-amachhiw@linux.ibm.com/
---
 arch/powerpc/include/asm/reg.h |  1 +
 arch/powerpc/kvm/book3s_hv.c   | 15 ++++++++++++++-
 arch/powerpc/kvm/powerpc.c     |  4 ++++
 3 files changed, 19 insertions(+), 1 deletion(-)

diff --git a/arch/powerpc/include/asm/reg.h b/arch/powerpc/include/asm/reg.h
index 3449dd2b577d..7472b9522f71 100644
--- a/arch/powerpc/include/asm/reg.h
+++ b/arch/powerpc/include/asm/reg.h
@@ -1356,6 +1356,7 @@
 #define PVR_ARCH_300	0x0f000005
 #define PVR_ARCH_31	0x0f000006
 #define PVR_ARCH_31_P11	0x0f000007
+#define PVR_ARCH_INVALID	0xffffffff
 
 /* Macros for setting and retrieving special purpose registers */
 #ifndef __ASSEMBLER__
diff --git a/arch/powerpc/kvm/book3s_hv.c b/arch/powerpc/kvm/book3s_hv.c
index 61dbeea317f3..f9380ef65750 100644
--- a/arch/powerpc/kvm/book3s_hv.c
+++ b/arch/powerpc/kvm/book3s_hv.c
@@ -446,7 +446,19 @@ static int kvmppc_set_arch_compat(struct kvm_vcpu *vcpu, u32 arch_compat)
 			guest_pcr_bit = PCR_ARCH_300;
 			break;
 		case PVR_ARCH_31:
+			guest_pcr_bit = PCR_ARCH_31;
+			break;
 		case PVR_ARCH_31_P11:
+			/*
+			 * Need to check this for ISA 3.1, as Power10 and
+			 * Power11 share the same PCR. For any subsequent ISA
+			 * versions, this will be taken care of by the guest vs
+			 * host PCR comparison below.
+			 */
+			if (!cpu_has_feature(CPU_FTR_P11_PVR)) {
+				arch_compat = PVR_ARCH_INVALID;
+				goto out;
+			}
 			guest_pcr_bit = PCR_ARCH_31;
 			break;
 		default:
@@ -469,6 +481,7 @@ static int kvmppc_set_arch_compat(struct kvm_vcpu *vcpu, u32 arch_compat)
 			return -EINVAL;
 	}
 
+out:
 	spin_lock(&vc->lock);
 	vc->arch_compat = arch_compat;
 	kvmhv_nestedv2_mark_dirty(vcpu, KVMPPC_GSID_LOGICAL_PVR);
@@ -479,7 +492,7 @@ static int kvmppc_set_arch_compat(struct kvm_vcpu *vcpu, u32 arch_compat)
 	vc->pcr = (host_pcr_bit - guest_pcr_bit) | PCR_MASK;
 	spin_unlock(&vc->lock);
 
-	return 0;
+	return kvmppc_sanity_check(vcpu);
 }
 
 static void kvmppc_dump_regs(struct kvm_vcpu *vcpu)
diff --git a/arch/powerpc/kvm/powerpc.c b/arch/powerpc/kvm/powerpc.c
index 00302399fc37..98de68379b18 100644
--- a/arch/powerpc/kvm/powerpc.c
+++ b/arch/powerpc/kvm/powerpc.c
@@ -258,6 +258,10 @@ int kvmppc_sanity_check(struct kvm_vcpu *vcpu)
 	if (!vcpu->arch.pvr)
 		goto out;
 
+	if (vcpu->arch.vcore &&
+		vcpu->arch.vcore->arch_compat == PVR_ARCH_INVALID)
+		goto out;
+
 	/* PAPR only works with book3s_64 */
 	if ((vcpu->arch.cpu_type != KVM_CPU_3S_64) && vcpu->arch.papr_enabled)
 		goto out;

base-commit: 2d3090a8aeb596a26935db0955d46c9a5db5c6ce
-- 
2.50.1 (Apple Git-155)