[patch 00/16] PCI: consolidate several pcibios_enable_resources() implementations, v3

[patch 00/16] PCI: consolidate several pcibios_enable_resources() implementations, v3

[Bjorn Helgaas]

This series replaces most of the arch-specific pcibios_enable_resources()
implementations with a single generic pci_enable_resources().

I think this is ready for -mm, but of course, I'm still interested in
any other comments.

Changes between v2 and v3:
    
    - Renamed the generic version to pci_enable_resources(), to keep
      pcibios_* names for arch-specific code (suggested by Kyle, thanks).

    - I reorganized this series into a single PCI patch that adds the new
      generic version, followed by a bunch of patches that individually
      convert each arch over to use it.

Bjorn

-- 

[patch 01/16] PCI: add generic pci_enable_resources()

[Bjorn Helgaas]

Each architecture has its own pcibios_enable_resources() implementation.
These differ in many minor ways that have nothing to do with actual
architectural differences.  Follow-on patches will make most arches
use this generic version instead.

This version is based on powerpc, which seemed most up-to-date.  The only
functional difference from the x86 version is that this uses "!r->parent"
to check for resource collisions instead of "!r->start && r->end".

Signed-off-by: Bjorn Helgaas <bjorn.helgaas@hp.com>

Index: work8/drivers/pci/setup-res.c
===================================================================
--- work8.orig/drivers/pci/setup-res.c	2008-03-04 09:56:53.000000000 -0700
+++ work8/drivers/pci/setup-res.c	2008-03-04 09:56:56.000000000 -0700
@@ -263,3 +263,46 @@
 		}
 	}
 }
+
+int pci_enable_resources(struct pci_dev *dev, int mask)
+{
+	u16 cmd, old_cmd;
+	int i;
+	struct resource *r;
+
+	pci_read_config_word(dev, PCI_COMMAND, &cmd);
+	old_cmd = cmd;
+
+	for (i = 0; i < PCI_NUM_RESOURCES; i++) {
+		if (!(mask & (1 << i)))
+			continue;
+
+		r = &dev->resource[i];
+
+		if (!(r->flags & (IORESOURCE_IO | IORESOURCE_MEM)))
+			continue;
+		if ((i == PCI_ROM_RESOURCE) &&
+				(!(r->flags & IORESOURCE_ROM_ENABLE)))
+			continue;
+
+		if (!r->parent) {
+			dev_err(&dev->dev, "device not available because of "
+				"BAR %d [%llx:%llx] collisions\n", i,
+				(unsigned long long) r->start,
+				(unsigned long long) r->end);
+			return -EINVAL;
+		}
+
+		if (r->flags & IORESOURCE_IO)
+			cmd |= PCI_COMMAND_IO;
+		if (r->flags & IORESOURCE_MEM)
+			cmd |= PCI_COMMAND_MEMORY;
+	}
+
+	if (cmd != old_cmd) {
+		dev_info(&dev->dev, "enabling device (%04x -> %04x)\n",
+			 old_cmd, cmd);
+		pci_write_config_word(dev, PCI_COMMAND, cmd);
+	}
+	return 0;
+}
Index: work8/include/linux/pci.h
===================================================================
--- work8.orig/include/linux/pci.h	2008-03-04 09:56:45.000000000 -0700
+++ work8/include/linux/pci.h	2008-03-04 09:56:56.000000000 -0700
@@ -616,6 +616,7 @@
 void pci_assign_unassigned_resources(void);
 void pdev_enable_device(struct pci_dev *);
 void pdev_sort_resources(struct pci_dev *, struct resource_list *);
+int pci_enable_resources(struct pci_dev *, int mask);
 void pci_fixup_irqs(u8 (*)(struct pci_dev *, u8 *),
 		    int (*)(struct pci_dev *, u8, u8));
 #define HAVE_PCI_REQ_REGIONS	2

-- 

[patch 02/16] alpha: use generic pci_enable_resources()

[Bjorn Helgaas]

Use the generic pci_enable_resources() instead of the arch-specific code.

Unlike this arch-specific code, the generic version:
    - skips resources unless requested in "mask"
    - skips ROM resources unless IORESOURCE_ROM_ENABLE is set
    - checks for resource collisions with "!r->parent"

Signed-off-by: Bjorn Helgaas <bjorn.helgaas@hp.com>

Index: work8/arch/alpha/kernel/pci.c
===================================================================
--- work8.orig/arch/alpha/kernel/pci.c	2008-03-04 09:58:07.000000000 -0700
+++ work8/arch/alpha/kernel/pci.c	2008-03-04 09:58:54.000000000 -0700
@@ -372,28 +372,7 @@
 int
 pcibios_enable_device(struct pci_dev *dev, int mask)
 {
-	u16 cmd, oldcmd;
-	int i;
-
-	pci_read_config_word(dev, PCI_COMMAND, &cmd);
-	oldcmd = cmd;
-
-	for (i = 0; i < PCI_NUM_RESOURCES; i++) {
-		struct resource *res = &dev->resource[i];
-
-		if (res->flags & IORESOURCE_IO)
-			cmd |= PCI_COMMAND_IO;
-		else if (res->flags & IORESOURCE_MEM)
-			cmd |= PCI_COMMAND_MEMORY;
-	}
-
-	if (cmd != oldcmd) {
-		printk(KERN_DEBUG "PCI: Enabling device: (%s), cmd %x\n",
-		       pci_name(dev), cmd);
-		/* Enable the appropriate bits in the PCI command register.  */
-		pci_write_config_word(dev, PCI_COMMAND, cmd);
-	}
-	return 0;
+	return pci_enable_resources(dev, mask);
 }
 
 /*

-- 

[patch 03/16] arm: use generic pci_enable_resources()

[Bjorn Helgaas]

Use the generic pci_enable_resources() instead of the arch-specific code.

Unlike this arch-specific code, the generic version:
    - checks PCI_NUM_RESOURCES (11), not 6, resources
    - skips resources that have neither IORESOURCE_IO nor IORESOURCE_MEM set
    - skips ROM resources unless IORESOURCE_ROM_ENABLE is set
    - checks for resource collisions with "!r->parent"

Signed-off-by: Bjorn Helgaas <bjorn.helgaas@hp.com>

Index: work8/arch/arm/kernel/bios32.c
===================================================================
--- work8.orig/arch/arm/kernel/bios32.c	2008-03-04 09:59:24.000000000 -0700
+++ work8/arch/arm/kernel/bios32.c	2008-03-04 10:01:40.000000000 -0700
@@ -660,28 +660,15 @@
  */
 int pcibios_enable_device(struct pci_dev *dev, int mask)
 {
+	int err;
 	u16 cmd, old_cmd;
-	int idx;
-	struct resource *r;
+
+	err = pci_enable_resources(dev, mask);
+	if (err < 0)
+		return err;
 
 	pci_read_config_word(dev, PCI_COMMAND, &cmd);
 	old_cmd = cmd;
-	for (idx = 0; idx < 6; idx++) {
-		/* Only set up the requested stuff */
-		if (!(mask & (1 << idx)))
-			continue;
-
-		r = dev->resource + idx;
-		if (!r->start && r->end) {
-			printk(KERN_ERR "PCI: Device %s not available because"
-			       " of resource collisions\n", pci_name(dev));
-			return -EINVAL;
-		}
-		if (r->flags & IORESOURCE_IO)
-			cmd |= PCI_COMMAND_IO;
-		if (r->flags & IORESOURCE_MEM)
-			cmd |= PCI_COMMAND_MEMORY;
-	}
 
 	/*
 	 * Bridges (eg, cardbus bridges) need to be fully enabled
@@ -690,8 +677,8 @@
 		cmd |= PCI_COMMAND_IO | PCI_COMMAND_MEMORY;
 
 	if (cmd != old_cmd) {
-		printk("PCI: enabling device %s (%04x -> %04x)\n",
-		       pci_name(dev), old_cmd, cmd);
+		dev_info(&dev->dev, "enabling bridge device (%04x -> %04x)\n",
+		       old_cmd, cmd);
 		pci_write_config_word(dev, PCI_COMMAND, cmd);
 	}
 	return 0;

-- 

[patch 04/16] cris: use generic pci_enable_resources()

[Bjorn Helgaas]

Use the generic pci_enable_resources() instead of the arch-specific code.

Unlike this arch-specific code, the generic version:
    - checks PCI_NUM_RESOURCES (11), not 6, resources
    - skips resources that have neither IORESOURCE_IO nor IORESOURCE_MEM set
    - skips ROM resources unless IORESOURCE_ROM_ENABLE is set
    - checks for resource collisions with "!r->parent"

Signed-off-by: Bjorn Helgaas <bjorn.helgaas@hp.com>

Index: work8/arch/cris/arch-v32/drivers/pci/bios.c
===================================================================
--- work8.orig/arch/cris/arch-v32/drivers/pci/bios.c	2008-03-04 10:02:27.000000000 -0700
+++ work8/arch/cris/arch-v32/drivers/pci/bios.c	2008-03-04 10:02:47.000000000 -0700
@@ -55,38 +55,6 @@
 	}
 }
 
-int pcibios_enable_resources(struct pci_dev *dev, int mask)
-{
-	u16 cmd, old_cmd;
-	int idx;
-	struct resource *r;
-
-	pci_read_config_word(dev, PCI_COMMAND, &cmd);
-	old_cmd = cmd;
-	for(idx=0; idx<6; idx++) {
-		/* Only set up the requested stuff */
-		if (!(mask & (1<<idx)))
-			continue;
-
-		r = &dev->resource[idx];
-		if (!r->start && r->end) {
-			printk(KERN_ERR "PCI: Device %s not available because of resource collisions\n", pci_name(dev));
-			return -EINVAL;
-		}
-		if (r->flags & IORESOURCE_IO)
-			cmd |= PCI_COMMAND_IO;
-		if (r->flags & IORESOURCE_MEM)
-			cmd |= PCI_COMMAND_MEMORY;
-	}
-	if (dev->resource[PCI_ROM_RESOURCE].start)
-		cmd |= PCI_COMMAND_MEMORY;
-	if (cmd != old_cmd) {
-		printk("PCI: Enabling device %s (%04x -> %04x)\n", pci_name(dev), old_cmd, cmd);
-		pci_write_config_word(dev, PCI_COMMAND, cmd);
-	}
-	return 0;
-}
-
 int pcibios_enable_irq(struct pci_dev *dev)
 {
 	dev->irq = EXT_INTR_VECT;
@@ -97,7 +65,7 @@
 {
 	int err;
 
-	if ((err = pcibios_enable_resources(dev, mask)) < 0)
+	if ((err = pci_enable_resources(dev, mask)) < 0)
 		return err;
 
 	if (!dev->msi_enabled)

-- 

[patch 05/16] frv: use generic pci_enable_resources()

[Bjorn Helgaas]

Use the generic pci_enable_resources() instead of the arch-specific code.

Unlike this arch-specific code, the generic version:
    - checks PCI_NUM_RESOURCES (11), not 6, resources
    - skips resources that have neither IORESOURCE_IO nor IORESOURCE_MEM set
    - skips ROM resources unless IORESOURCE_ROM_ENABLE is set
    - checks for resource collisions with "!r->parent"

Signed-off-by: Bjorn Helgaas <bjorn.helgaas@hp.com>

Index: work8/arch/frv/mb93090-mb00/pci-frv.c
===================================================================
--- work8.orig/arch/frv/mb93090-mb00/pci-frv.c	2008-03-04 10:03:11.000000000 -0700
+++ work8/arch/frv/mb93090-mb00/pci-frv.c	2008-03-04 10:03:25.000000000 -0700
@@ -231,38 +231,6 @@
 	pcibios_assign_resources();
 }
 
-int pcibios_enable_resources(struct pci_dev *dev, int mask)
-{
-	u16 cmd, old_cmd;
-	int idx;
-	struct resource *r;
-
-	pci_read_config_word(dev, PCI_COMMAND, &cmd);
-	old_cmd = cmd;
-	for(idx=0; idx<6; idx++) {
-		/* Only set up the requested stuff */
-		if (!(mask & (1<<idx)))
-			continue;
-
-		r = &dev->resource[idx];
-		if (!r->start && r->end) {
-			printk(KERN_ERR "PCI: Device %s not available because of resource collisions\n", pci_name(dev));
-			return -EINVAL;
-		}
-		if (r->flags & IORESOURCE_IO)
-			cmd |= PCI_COMMAND_IO;
-		if (r->flags & IORESOURCE_MEM)
-			cmd |= PCI_COMMAND_MEMORY;
-	}
-	if (dev->resource[PCI_ROM_RESOURCE].start)
-		cmd |= PCI_COMMAND_MEMORY;
-	if (cmd != old_cmd) {
-		printk("PCI: Enabling device %s (%04x -> %04x)\n", pci_name(dev), old_cmd, cmd);
-		pci_write_config_word(dev, PCI_COMMAND, cmd);
-	}
-	return 0;
-}
-
 /*
  *  If we set up a device for bus mastering, we need to check the latency
  *  timer as certain crappy BIOSes forget to set it properly.
Index: work8/arch/frv/mb93090-mb00/pci-frv.h
===================================================================
--- work8.orig/arch/frv/mb93090-mb00/pci-frv.h	2008-03-04 10:03:29.000000000 -0700
+++ work8/arch/frv/mb93090-mb00/pci-frv.h	2008-03-04 10:03:33.000000000 -0700
@@ -31,7 +31,6 @@
 extern unsigned int pcibios_max_latency;
 
 void pcibios_resource_survey(void);
-int pcibios_enable_resources(struct pci_dev *, int);
 
 /* pci-vdk.c */
 
Index: work8/arch/frv/mb93090-mb00/pci-vdk.c
===================================================================
--- work8.orig/arch/frv/mb93090-mb00/pci-vdk.c	2008-03-04 10:03:37.000000000 -0700
+++ work8/arch/frv/mb93090-mb00/pci-vdk.c	2008-03-04 10:03:45.000000000 -0700
@@ -465,7 +465,7 @@
 {
 	int err;
 
-	if ((err = pcibios_enable_resources(dev, mask)) < 0)
+	if ((err = pci_enable_resources(dev, mask)) < 0)
 		return err;
 	if (!dev->msi_enabled)
 		pcibios_enable_irq(dev);

-- 

[patch 06/16] ia64: use generic pci_enable_resources()

[Bjorn Helgaas]

Use the generic pci_enable_resources() instead of the arch-specific code.

Unlike this arch-specific code, the generic version:
    - does not check for a NULL dev pointer
    - skips resources that have neither IORESOURCE_IO nor IORESOURCE_MEM set

Signed-off-by: Bjorn Helgaas <bjorn.helgaas@hp.com>

Index: work8/arch/ia64/pci/pci.c
===================================================================
--- work8.orig/arch/ia64/pci/pci.c	2008-03-04 10:04:18.000000000 -0700
+++ work8/arch/ia64/pci/pci.c	2008-03-04 10:04:35.000000000 -0700
@@ -499,54 +499,12 @@
 	/* ??? FIXME -- record old value for shutdown.  */
 }
 
-static inline int
-pcibios_enable_resources (struct pci_dev *dev, int mask)
-{
-	u16 cmd, old_cmd;
-	int idx;
-	struct resource *r;
-	unsigned long type_mask = IORESOURCE_IO | IORESOURCE_MEM;
-
-	if (!dev)
-		return -EINVAL;
-
-	pci_read_config_word(dev, PCI_COMMAND, &cmd);
-	old_cmd = cmd;
-	for (idx=0; idx<PCI_NUM_RESOURCES; idx++) {
-		/* Only set up the desired resources.  */
-		if (!(mask & (1 << idx)))
-			continue;
-
-		r = &dev->resource[idx];
-		if (!(r->flags & type_mask))
-			continue;
-		if ((idx == PCI_ROM_RESOURCE) &&
-				(!(r->flags & IORESOURCE_ROM_ENABLE)))
-			continue;
-		if (!r->start && r->end) {
-			printk(KERN_ERR
-			       "PCI: Device %s not available because of resource collisions\n",
-			       pci_name(dev));
-			return -EINVAL;
-		}
-		if (r->flags & IORESOURCE_IO)
-			cmd |= PCI_COMMAND_IO;
-		if (r->flags & IORESOURCE_MEM)
-			cmd |= PCI_COMMAND_MEMORY;
-	}
-	if (cmd != old_cmd) {
-		printk("PCI: Enabling device %s (%04x -> %04x)\n", pci_name(dev), old_cmd, cmd);
-		pci_write_config_word(dev, PCI_COMMAND, cmd);
-	}
-	return 0;
-}
-
 int
 pcibios_enable_device (struct pci_dev *dev, int mask)
 {
 	int ret;
 
-	ret = pcibios_enable_resources(dev, mask);
+	ret = pci_enable_resources(dev, mask);
 	if (ret < 0)
 		return ret;
 

-- 

[patch 07/16] mips: use generic pci_enable_resources()

[Bjorn Helgaas]

Use the generic pci_enable_resources() instead of the arch-specific code.

Unlike this arch-specific code, the generic version:
    - checks for resource collisions with "!r->parent"

Signed-off-by: Bjorn Helgaas <bjorn.helgaas@hp.com>

Index: work8/arch/mips/pci/pci.c
===================================================================
--- work8.orig/arch/mips/pci/pci.c	2008-03-04 10:04:51.000000000 -0700
+++ work8/arch/mips/pci/pci.c	2008-03-04 10:05:08.000000000 -0700
@@ -163,44 +163,6 @@
 
 subsys_initcall(pcibios_init);
 
-static int pcibios_enable_resources(struct pci_dev *dev, int mask)
-{
-	u16 cmd, old_cmd;
-	int idx;
-	struct resource *r;
-
-	pci_read_config_word(dev, PCI_COMMAND, &cmd);
-	old_cmd = cmd;
-	for (idx=0; idx < PCI_NUM_RESOURCES; idx++) {
-		/* Only set up the requested stuff */
-		if (!(mask & (1<<idx)))
-			continue;
-
-		r = &dev->resource[idx];
-		if (!(r->flags & (IORESOURCE_IO | IORESOURCE_MEM)))
-			continue;
-		if ((idx == PCI_ROM_RESOURCE) &&
-				(!(r->flags & IORESOURCE_ROM_ENABLE)))
-			continue;
-		if (!r->start && r->end) {
-			printk(KERN_ERR "PCI: Device %s not available "
-			       "because of resource collisions\n",
-			       pci_name(dev));
-			return -EINVAL;
-		}
-		if (r->flags & IORESOURCE_IO)
-			cmd |= PCI_COMMAND_IO;
-		if (r->flags & IORESOURCE_MEM)
-			cmd |= PCI_COMMAND_MEMORY;
-	}
-	if (cmd != old_cmd) {
-		printk("PCI: Enabling device %s (%04x -> %04x)\n",
-		       pci_name(dev), old_cmd, cmd);
-		pci_write_config_word(dev, PCI_COMMAND, cmd);
-	}
-	return 0;
-}
-
 /*
  *  If we set up a device for bus mastering, we need to check the latency
  *  timer as certain crappy BIOSes forget to set it properly.
@@ -231,7 +193,7 @@
 {
 	int err;
 
-	if ((err = pcibios_enable_resources(dev, mask)) < 0)
+	if ((err = pci_enable_resources(dev, mask)) < 0)
 		return err;
 
 	return pcibios_plat_dev_init(dev);

-- 

[patch 08/16] mn10300: use generic pci_enable_resources()

[Bjorn Helgaas]

Use the generic pci_enable_resources() instead of the arch-specific code.

Unlike this arch-specific code, the generic version:
    - checks PCI_NUM_RESOURCES (11), not 6, resources
    - skips resources that have neither IORESOURCE_IO nor IORESOURCE_MEM set
    - skips ROM resources unless IORESOURCE_ROM_ENABLE is set
    - checks for resource collisions with "!r->parent"

Signed-off-by: Bjorn Helgaas <bjorn.helgaas@hp.com>

Index: work8/arch/mn10300/unit-asb2305/pci-asb2305.c
===================================================================
--- work8.orig/arch/mn10300/unit-asb2305/pci-asb2305.c	2008-03-04 10:05:27.000000000 -0700
+++ work8/arch/mn10300/unit-asb2305/pci-asb2305.c	2008-03-04 10:05:36.000000000 -0700
@@ -218,45 +218,6 @@
 	pcibios_allocate_resources(1);
 }
 
-int pcibios_enable_resources(struct pci_dev *dev, int mask)
-{
-	u16 cmd, old_cmd;
-	int idx;
-	struct resource *r;
-
-	pci_read_config_word(dev, PCI_COMMAND, &cmd);
-	old_cmd = cmd;
-
-	for (idx = 0; idx < 6; idx++) {
-		/* Only set up the requested stuff */
-		if (!(mask & (1 << idx)))
-			continue;
-
-		r = &dev->resource[idx];
-
-		if (!r->start && r->end) {
-			printk(KERN_ERR
-			       "PCI: Device %s not available because of"
-			       " resource collisions\n",
-			       pci_name(dev));
-			return -EINVAL;
-		}
-
-		if (r->flags & IORESOURCE_IO)
-			cmd |= PCI_COMMAND_IO;
-		if (r->flags & IORESOURCE_MEM)
-			cmd |= PCI_COMMAND_MEMORY;
-	}
-
-	if (dev->resource[PCI_ROM_RESOURCE].start)
-		cmd |= PCI_COMMAND_MEMORY;
-
-	if (cmd != old_cmd)
-		pci_write_config_word(dev, PCI_COMMAND, cmd);
-
-	return 0;
-}
-
 /*
  *  If we set up a device for bus mastering, we need to check the latency
  *  timer as certain crappy BIOSes forget to set it properly.
Index: work8/arch/mn10300/unit-asb2305/pci-asb2305.h
===================================================================
--- work8.orig/arch/mn10300/unit-asb2305/pci-asb2305.h	2008-03-04 10:05:41.000000000 -0700
+++ work8/arch/mn10300/unit-asb2305/pci-asb2305.h	2008-03-04 10:05:45.000000000 -0700
@@ -36,7 +36,6 @@
 extern unsigned int pcibios_max_latency;
 
 extern void pcibios_resource_survey(void);
-extern int pcibios_enable_resources(struct pci_dev *dev, int mask);
 
 /* pci.c */
 
Index: work8/arch/mn10300/unit-asb2305/pci.c
===================================================================
--- work8.orig/arch/mn10300/unit-asb2305/pci.c	2008-03-04 10:05:49.000000000 -0700
+++ work8/arch/mn10300/unit-asb2305/pci.c	2008-03-04 10:05:54.000000000 -0700
@@ -440,7 +440,7 @@
 {
 	int err;
 
-	err = pcibios_enable_resources(dev, mask);
+	err = pci_enable_resources(dev, mask);
 	if (err == 0)
 		pcibios_enable_irq(dev);
 	return err;

-- 

[patch 09/16] parisc: use generic pci_enable_resources()

[Bjorn Helgaas]

Use the generic pci_enable_resources() instead of the arch-specific code.

Unlike this arch-specific code, the generic version:
    - checks PCI_NUM_RESOURCES (11), not DEVICE_COUNT_RESOURCE (12), resources
    - skips resources that have neither IORESOURCE_IO nor IORESOURCE_MEM set
    - skips ROM resources unless IORESOURCE_ROM_ENABLE is set
    - checks for resource collisions with "!r->parent"

Signed-off-by: Bjorn Helgaas <bjorn.helgaas@hp.com>

Index: work8/arch/parisc/kernel/pci.c
===================================================================
--- work8.orig/arch/parisc/kernel/pci.c	2008-03-04 10:06:11.000000000 -0700
+++ work8/arch/parisc/kernel/pci.c	2008-03-04 10:07:54.000000000 -0700
@@ -287,23 +287,15 @@
  */
 int pcibios_enable_device(struct pci_dev *dev, int mask)
 {
-	u16 cmd;
-	int idx;
+	int err;
+	u16 cmd, old_cmd;
 
-	pci_read_config_word(dev, PCI_COMMAND, &cmd);
-
-	for (idx = 0; idx < DEVICE_COUNT_RESOURCE; idx++) {
-		struct resource *r = &dev->resource[idx];
+	err = pci_enable_resources(dev, mask);
+	if (err < 0)
+		return err;
 
-		/* only setup requested resources */
-		if (!(mask & (1<<idx)))
-			continue;
-
-		if (r->flags & IORESOURCE_IO)
-			cmd |= PCI_COMMAND_IO;
-		if (r->flags & IORESOURCE_MEM)
-			cmd |= PCI_COMMAND_MEMORY;
-	}
+	pci_read_config_word(dev, PCI_COMMAND, &cmd);
+	old_cmd = cmd;
 
 	cmd |= (PCI_COMMAND_SERR | PCI_COMMAND_PARITY);
 
@@ -312,8 +304,12 @@
 	if (dev->bus->bridge_ctl & PCI_BRIDGE_CTL_FAST_BACK)
 		cmd |= PCI_COMMAND_FAST_BACK;
 #endif
-	DBGC("PCIBIOS: Enabling device %s cmd 0x%04x\n", pci_name(dev), cmd);
-	pci_write_config_word(dev, PCI_COMMAND, cmd);
+
+	if (cmd != old_cmd) {
+		dev_info(&dev->dev, "enabling SERR and PARITY (%04x -> %04x)\n",
+			old_cmd, cmd);
+		pci_write_config_word(dev, PCI_COMMAND, cmd);
+	}
 	return 0;
 }
 

-- 

[patch 10/16] powerpc: use generic pci_enable_resources()

[Bjorn Helgaas]

Use the generic pci_enable_resources() instead of the arch-specific code.
The generic version is functionally equivalent, but uses dev_printk.

Signed-off-by: Bjorn Helgaas <bjorn.helgaas@hp.com>

Index: work8/arch/powerpc/kernel/pci-common.c
===================================================================
--- work8.orig/arch/powerpc/kernel/pci-common.c	2008-03-04 10:08:18.000000000 -0700
+++ work8/arch/powerpc/kernel/pci-common.c	2008-03-04 10:08:54.000000000 -0700
@@ -1155,41 +1155,9 @@
 
 int pcibios_enable_device(struct pci_dev *dev, int mask)
 {
-	u16 cmd, old_cmd;
-	int idx;
-	struct resource *r;
-
 	if (ppc_md.pcibios_enable_device_hook)
 		if (ppc_md.pcibios_enable_device_hook(dev))
 			return -EINVAL;
 
-	pci_read_config_word(dev, PCI_COMMAND, &cmd);
-	old_cmd = cmd;
-	for (idx = 0; idx < PCI_NUM_RESOURCES; idx++) {
-		/* Only set up the requested stuff */
-		if (!(mask & (1 << idx)))
-			continue;
-		r = &dev->resource[idx];
-		if (!(r->flags & (IORESOURCE_IO | IORESOURCE_MEM)))
-			continue;
-		if ((idx == PCI_ROM_RESOURCE) &&
-				(!(r->flags & IORESOURCE_ROM_ENABLE)))
-			continue;
-		if (r->parent == NULL) {
-			printk(KERN_ERR "PCI: Device %s not available because"
-			       " of resource collisions\n", pci_name(dev));
-			return -EINVAL;
-		}
-		if (r->flags & IORESOURCE_IO)
-			cmd |= PCI_COMMAND_IO;
-		if (r->flags & IORESOURCE_MEM)
-			cmd |= PCI_COMMAND_MEMORY;
-	}
-	if (cmd != old_cmd) {
-		printk("PCI: Enabling device %s (%04x -> %04x)\n",
-		       pci_name(dev), old_cmd, cmd);
-		pci_write_config_word(dev, PCI_COMMAND, cmd);
-	}
-	return 0;
+	return pci_enable_resources(dev, mask);
 }
-

-- 

[patch 11/16] ppc: use generic pci_enable_resources()

[Bjorn Helgaas]

Use the generic pci_enable_resources() instead of the arch-specific code.

Unlike this arch-specific code, the generic version:
    - checks PCI_NUM_RESOURCES (11), not 6, resources
    - skips resources that have neither IORESOURCE_IO nor IORESOURCE_MEM set
    - skips ROM resources unless IORESOURCE_ROM_ENABLE is set
    - checks for resource collisions with "!r->parent", not IORESOURCE_UNSET

Signed-off-by: Bjorn Helgaas <bjorn.helgaas@hp.com>

Index: work8/arch/ppc/kernel/pci.c
===================================================================
--- work8.orig/arch/ppc/kernel/pci.c	2008-03-04 10:09:13.000000000 -0700
+++ work8/arch/ppc/kernel/pci.c	2008-03-04 10:10:18.000000000 -0700
@@ -578,39 +578,6 @@
 }
 
 
-int
-pcibios_enable_resources(struct pci_dev *dev, int mask)
-{
-	u16 cmd, old_cmd;
-	int idx;
-	struct resource *r;
-
-	pci_read_config_word(dev, PCI_COMMAND, &cmd);
-	old_cmd = cmd;
-	for (idx=0; idx<6; idx++) {
-		/* Only set up the requested stuff */
-		if (!(mask & (1<<idx)))
-			continue;
-	
-		r = &dev->resource[idx];
-		if (r->flags & IORESOURCE_UNSET) {
-			printk(KERN_ERR "PCI: Device %s not available because of resource collisions\n", pci_name(dev));
-			return -EINVAL;
-		}
-		if (r->flags & IORESOURCE_IO)
-			cmd |= PCI_COMMAND_IO;
-		if (r->flags & IORESOURCE_MEM)
-			cmd |= PCI_COMMAND_MEMORY;
-	}
-	if (dev->resource[PCI_ROM_RESOURCE].start)
-		cmd |= PCI_COMMAND_MEMORY;
-	if (cmd != old_cmd) {
-		printk("PCI: Enabling device %s (%04x -> %04x)\n", pci_name(dev), old_cmd, cmd);
-		pci_write_config_word(dev, PCI_COMMAND, cmd);
-	}
-	return 0;
-}
-
 static int next_controller_index;
 
 struct pci_controller * __init
@@ -785,33 +752,11 @@
 
 int pcibios_enable_device(struct pci_dev *dev, int mask)
 {
-	u16 cmd, old_cmd;
-	int idx;
-	struct resource *r;
-
 	if (ppc_md.pcibios_enable_device_hook)
 		if (ppc_md.pcibios_enable_device_hook(dev, 0))
 			return -EINVAL;
-		
-	pci_read_config_word(dev, PCI_COMMAND, &cmd);
-	old_cmd = cmd;
-	for (idx=0; idx<6; idx++) {
-		r = &dev->resource[idx];
-		if (r->flags & IORESOURCE_UNSET) {
-			printk(KERN_ERR "PCI: Device %s not available because of resource collisions\n", pci_name(dev));
-			return -EINVAL;
-		}
-		if (r->flags & IORESOURCE_IO)
-			cmd |= PCI_COMMAND_IO;
-		if (r->flags & IORESOURCE_MEM)
-			cmd |= PCI_COMMAND_MEMORY;
-	}
-	if (cmd != old_cmd) {
-		printk("PCI: Enabling device %s (%04x -> %04x)\n",
-		       pci_name(dev), old_cmd, cmd);
-		pci_write_config_word(dev, PCI_COMMAND, cmd);
-	}
-	return 0;
+
+	return pci_enable_resources(dev, mask);
 }
 
 struct pci_controller*

-- 

[patch 12/16] sh: use generic pci_enable_resources()

[Bjorn Helgaas]

Use the generic pci_enable_resources() instead of the arch-specific code.

Unlike this arch-specific code, the generic version:
    - checks PCI_NUM_RESOURCES (11), not 6, resources
    - skips resources that have neither IORESOURCE_IO nor IORESOURCE_MEM set
    - skips ROM resources unless IORESOURCE_ROM_ENABLE is set
    - checks for resource collisions with "!r->parent"

Signed-off-by: Bjorn Helgaas <bjorn.helgaas@hp.com>

Index: work8/arch/sh/drivers/pci/pci.c
===================================================================
--- work8.orig/arch/sh/drivers/pci/pci.c	2008-03-04 10:10:44.000000000 -0700
+++ work8/arch/sh/drivers/pci/pci.c	2008-03-04 10:11:04.000000000 -0700
@@ -133,34 +133,7 @@
 
 int pcibios_enable_device(struct pci_dev *dev, int mask)
 {
-	u16 cmd, old_cmd;
-	int idx;
-	struct resource *r;
-
-	pci_read_config_word(dev, PCI_COMMAND, &cmd);
-	old_cmd = cmd;
-	for(idx=0; idx<6; idx++) {
-		if (!(mask & (1 << idx)))
-			continue;
-		r = &dev->resource[idx];
-		if (!r->start && r->end) {
-			printk(KERN_ERR "PCI: Device %s not available because "
-			       "of resource collisions\n", pci_name(dev));
-			return -EINVAL;
-		}
-		if (r->flags & IORESOURCE_IO)
-			cmd |= PCI_COMMAND_IO;
-		if (r->flags & IORESOURCE_MEM)
-			cmd |= PCI_COMMAND_MEMORY;
-	}
-	if (dev->resource[PCI_ROM_RESOURCE].start)
-		cmd |= PCI_COMMAND_MEMORY;
-	if (cmd != old_cmd) {
-		printk(KERN_INFO "PCI: Enabling device %s (%04x -> %04x)\n",
-		       pci_name(dev), old_cmd, cmd);
-		pci_write_config_word(dev, PCI_COMMAND, cmd);
-	}
-	return 0;
+	return pci_enable_resources(dev, mask);
 }
 
 /*

-- 

[patch 13/16] sparc64: use generic pci_enable_resources()

[Bjorn Helgaas]

Use the generic pci_enable_resources() instead of the arch-specific code.

Unlike this arch-specific code, the generic version:
    - skips resources that have neither IORESOURCE_IO nor IORESOURCE_MEM set
    - skips ROM resources unless IORESOURCE_ROM_ENABLE is set
    - checks for resource collisions with "!r->parent"

Signed-off-by: Bjorn Helgaas <bjorn.helgaas@hp.com>

Index: work8/arch/sparc64/kernel/pci.c
===================================================================
--- work8.orig/arch/sparc64/kernel/pci.c	2008-03-04 10:11:25.000000000 -0700
+++ work8/arch/sparc64/kernel/pci.c	2008-03-04 10:11:45.000000000 -0700
@@ -927,32 +927,7 @@
 
 int pcibios_enable_device(struct pci_dev *dev, int mask)
 {
-	u16 cmd, oldcmd;
-	int i;
-
-	pci_read_config_word(dev, PCI_COMMAND, &cmd);
-	oldcmd = cmd;
-
-	for (i = 0; i < PCI_NUM_RESOURCES; i++) {
-		struct resource *res = &dev->resource[i];
-
-		/* Only set up the requested stuff */
-		if (!(mask & (1<<i)))
-			continue;
-
-		if (res->flags & IORESOURCE_IO)
-			cmd |= PCI_COMMAND_IO;
-		if (res->flags & IORESOURCE_MEM)
-			cmd |= PCI_COMMAND_MEMORY;
-	}
-
-	if (cmd != oldcmd) {
-		printk(KERN_DEBUG "PCI: Enabling device: (%s), cmd %x\n",
-		       pci_name(dev), cmd);
-                /* Enable the appropriate bits in the PCI command register.  */
-		pci_write_config_word(dev, PCI_COMMAND, cmd);
-	}
-	return 0;
+	return pci_enable_resources(dev, mask);
 }
 
 void pcibios_resource_to_bus(struct pci_dev *pdev, struct pci_bus_region *region,

-- 

[patch 14/16] v850: use generic pci_enable_resources()

[Bjorn Helgaas]

Use the generic pci_enable_resources() instead of the arch-specific code.

Unlike this arch-specific code, the generic version:
    - checks PCI_NUM_RESOURCES (11), not 6, resources
    - skips resources that have neither IORESOURCE_IO nor IORESOURCE_MEM set
    - skips ROM resources unless IORESOURCE_ROM_ENABLE is set
    - checks for resource collisions with "!r->parent"

Signed-off-by: Bjorn Helgaas <bjorn.helgaas@hp.com>

Index: work8/arch/v850/kernel/rte_mb_a_pci.c
===================================================================
--- work8.orig/arch/v850/kernel/rte_mb_a_pci.c	2008-03-04 10:12:04.000000000 -0700
+++ work8/arch/v850/kernel/rte_mb_a_pci.c	2008-03-04 10:12:26.000000000 -0700
@@ -219,30 +219,7 @@
 \f
 int __nomods_init pcibios_enable_device (struct pci_dev *dev, int mask)
 {
-	u16 cmd, old_cmd;
-	int idx;
-	struct resource *r;
-
-	pci_read_config_word(dev, PCI_COMMAND, &cmd);
-	old_cmd = cmd;
-	for (idx = 0; idx < 6; idx++) {
-		r = &dev->resource[idx];
-		if (!r->start && r->end) {
-			printk(KERN_ERR "PCI: Device %s not available because "
-			       "of resource collisions\n", pci_name(dev));
-			return -EINVAL;
-		}
-		if (r->flags & IORESOURCE_IO)
-			cmd |= PCI_COMMAND_IO;
-		if (r->flags & IORESOURCE_MEM)
-			cmd |= PCI_COMMAND_MEMORY;
-	}
-	if (cmd != old_cmd) {
-		printk("PCI: Enabling device %s (%04x -> %04x)\n",
-		       pci_name(dev), old_cmd, cmd);
-		pci_write_config_word(dev, PCI_COMMAND, cmd);
-	}
-	return 0;
+	return pci_enable_resources(dev, mask);
 }
 
 \f

-- 

[patch 15/16] x86: use generic pci_enable_resources()

[Bjorn Helgaas]

Use the generic pci_enable_resources() instead of the arch-specific code.

Unlike this arch-specific code, the generic version:
    - checks for resource collisions with "!r->parent"

Signed-off-by: Bjorn Helgaas <bjorn.helgaas@hp.com>

Index: work8/arch/x86/pci/common.c
===================================================================
--- work8.orig/arch/x86/pci/common.c	2008-03-04 10:12:42.000000000 -0700
+++ work8/arch/x86/pci/common.c	2008-03-04 10:12:51.000000000 -0700
@@ -527,7 +527,7 @@
 {
 	int err;
 
-	if ((err = pcibios_enable_resources(dev, mask)) < 0)
+	if ((err = pci_enable_resources(dev, mask)) < 0)
 		return err;
 
 	if (!dev->msi_enabled)
Index: work8/arch/x86/pci/i386.c
===================================================================
--- work8.orig/arch/x86/pci/i386.c	2008-03-04 10:12:56.000000000 -0700
+++ work8/arch/x86/pci/i386.c	2008-03-04 10:13:03.000000000 -0700
@@ -238,44 +238,6 @@
  */
 fs_initcall(pcibios_assign_resources);
 
-int pcibios_enable_resources(struct pci_dev *dev, int mask)
-{
-	u16 cmd, old_cmd;
-	int idx;
-	struct resource *r;
-
-	pci_read_config_word(dev, PCI_COMMAND, &cmd);
-	old_cmd = cmd;
-	for (idx = 0; idx < PCI_NUM_RESOURCES; idx++) {
-		/* Only set up the requested stuff */
-		if (!(mask & (1 << idx)))
-			continue;
-
-		r = &dev->resource[idx];
-		if (!(r->flags & (IORESOURCE_IO | IORESOURCE_MEM)))
-			continue;
-		if ((idx == PCI_ROM_RESOURCE) &&
-				(!(r->flags & IORESOURCE_ROM_ENABLE)))
-			continue;
-		if (!r->start && r->end) {
-			printk(KERN_ERR "PCI: Device %s not available "
-				"because of resource %d collisions\n",
-				pci_name(dev), idx);
-			return -EINVAL;
-		}
-		if (r->flags & IORESOURCE_IO)
-			cmd |= PCI_COMMAND_IO;
-		if (r->flags & IORESOURCE_MEM)
-			cmd |= PCI_COMMAND_MEMORY;
-	}
-	if (cmd != old_cmd) {
-		printk("PCI: Enabling device %s (%04x -> %04x)\n",
-			pci_name(dev), old_cmd, cmd);
-		pci_write_config_word(dev, PCI_COMMAND, cmd);
-	}
-	return 0;
-}
-
 /*
  *  If we set up a device for bus mastering, we need to check the latency
  *  timer as certain crappy BIOSes forget to set it properly.
Index: work8/arch/x86/pci/pci.h
===================================================================
--- work8.orig/arch/x86/pci/pci.h	2008-03-04 10:13:08.000000000 -0700
+++ work8/arch/x86/pci/pci.h	2008-03-04 10:13:12.000000000 -0700
@@ -44,7 +44,6 @@
 extern unsigned int pcibios_max_latency;
 
 void pcibios_resource_survey(void);
-int pcibios_enable_resources(struct pci_dev *, int);
 
 /* pci-pc.c */
 

-- 

[patch 16/16] xtensa: use generic pci_enable_resources()

[Bjorn Helgaas]

Use the generic pci_enable_resources() instead of the arch-specific code.

Unlike this arch-specific code, the generic version:
    - checks PCI_NUM_RESOURCES (11), not 6, resources
    - skips resources that have neither IORESOURCE_IO nor IORESOURCE_MEM set
    - skips ROM resources unless IORESOURCE_ROM_ENABLE is set
    - checks for resource collisions with "!r->parent"

Signed-off-by: Bjorn Helgaas <bjorn.helgaas@hp.com>

Index: work8/arch/xtensa/kernel/pci.c
===================================================================
--- work8.orig/arch/xtensa/kernel/pci.c	2008-03-04 10:17:29.000000000 -0700
+++ work8/arch/xtensa/kernel/pci.c	2008-03-04 10:18:07.000000000 -0700
@@ -91,37 +91,6 @@
 	}
 }
 
-int
-pcibios_enable_resources(struct pci_dev *dev, int mask)
-{
-	u16 cmd, old_cmd;
-	int idx;
-	struct resource *r;
-
-	pci_read_config_word(dev, PCI_COMMAND, &cmd);
-	old_cmd = cmd;
-	for(idx=0; idx<6; idx++) {
-		r = &dev->resource[idx];
-		if (!r->start && r->end) {
-			printk (KERN_ERR "PCI: Device %s not available because "
-				"of resource collisions\n", pci_name(dev));
-			return -EINVAL;
-		}
-		if (r->flags & IORESOURCE_IO)
-			cmd |= PCI_COMMAND_IO;
-		if (r->flags & IORESOURCE_MEM)
-			cmd |= PCI_COMMAND_MEMORY;
-	}
-	if (dev->resource[PCI_ROM_RESOURCE].start)
-		cmd |= PCI_COMMAND_MEMORY;
-	if (cmd != old_cmd) {
-		printk("PCI: Enabling device %s (%04x -> %04x)\n",
-			pci_name(dev), old_cmd, cmd);
-		pci_write_config_word(dev, PCI_COMMAND, cmd);
-	}
-	return 0;
-}
-
 struct pci_controller * __init pcibios_alloc_controller(void)
 {
 	struct pci_controller *pci_ctrl;
@@ -238,31 +207,7 @@
 
 int pcibios_enable_device(struct pci_dev *dev, int mask)
 {
-	u16 cmd, old_cmd;
-	int idx;
-	struct resource *r;
-
-	pci_read_config_word(dev, PCI_COMMAND, &cmd);
-	old_cmd = cmd;
-	for (idx=0; idx<6; idx++) {
-		r = &dev->resource[idx];
-		if (!r->start && r->end) {
-			printk(KERN_ERR "PCI: Device %s not available because "
-			       "of resource collisions\n", pci_name(dev));
-			return -EINVAL;
-		}
-		if (r->flags & IORESOURCE_IO)
-			cmd |= PCI_COMMAND_IO;
-		if (r->flags & IORESOURCE_MEM)
-			cmd |= PCI_COMMAND_MEMORY;
-	}
-	if (cmd != old_cmd) {
-		printk("PCI: Enabling device %s (%04x -> %04x)\n",
-		       pci_name(dev), old_cmd, cmd);
-		pci_write_config_word(dev, PCI_COMMAND, cmd);
-	}
-
-	return 0;
+	return pci_enable_resources(dev, mask);
 }
 
 #ifdef CONFIG_PROC_FS

-- 

Re: [patch 05/16] frv: use generic pci_enable_resources()

[David Howells]

Bjorn Helgaas <bjorn.helgaas@hp.com> wrote:

> Use the generic pci_enable_resources() instead of the arch-specific code.
> 
> Unlike this arch-specific code, the generic version:
>     - checks PCI_NUM_RESOURCES (11), not 6, resources
>     - skips resources that have neither IORESOURCE_IO nor IORESOURCE_MEM set
>     - skips ROM resources unless IORESOURCE_ROM_ENABLE is set
>     - checks for resource collisions with "!r->parent"
> 
> Signed-off-by: Bjorn Helgaas <bjorn.helgaas@hp.com>

Acked-by: David Howells <dhowells@redhat.com>

Re: [patch 01/16] PCI: add generic pci_enable_resources()

[David Howells]

Bjorn Helgaas <bjorn.helgaas@hp.com> wrote:

> Each architecture has its own pcibios_enable_resources() implementation.
> These differ in many minor ways that have nothing to do with actual
> architectural differences.  Follow-on patches will make most arches
> use this generic version instead.
> 
> This version is based on powerpc, which seemed most up-to-date.  The only
> functional difference from the x86 version is that this uses "!r->parent"
> to check for resource collisions instead of "!r->start && r->end".
> 
> Signed-off-by: Bjorn Helgaas <bjorn.helgaas@hp.com>

Acked-by: David Howells <dhowells@redhat.com>

Re: [patch 08/16] mn10300: use generic pci_enable_resources()

[David Howells]

Bjorn Helgaas <bjorn.helgaas@hp.com> wrote:

> Use the generic pci_enable_resources() instead of the arch-specific code.
> 
> Unlike this arch-specific code, the generic version:
>     - checks PCI_NUM_RESOURCES (11), not 6, resources
>     - skips resources that have neither IORESOURCE_IO nor IORESOURCE_MEM set
>     - skips ROM resources unless IORESOURCE_ROM_ENABLE is set
>     - checks for resource collisions with "!r->parent"
> 
> Signed-off-by: Bjorn Helgaas <bjorn.helgaas@hp.com>

Acked-by: David Howells <dhowells@redhat.com>

Re: [patch 09/16] parisc: use generic pci_enable_resources()

[Kyle McMartin]

On Tue, Mar 04, 2008 at 11:56:55AM -0700, Bjorn Helgaas wrote:
> Use the generic pci_enable_resources() instead of the arch-specific code.
> 
> Unlike this arch-specific code, the generic version:
>     - checks PCI_NUM_RESOURCES (11), not DEVICE_COUNT_RESOURCE (12), resources
>     - skips resources that have neither IORESOURCE_IO nor IORESOURCE_MEM set
>     - skips ROM resources unless IORESOURCE_ROM_ENABLE is set
>     - checks for resource collisions with "!r->parent"
> 
> Signed-off-by: Bjorn Helgaas <bjorn.helgaas@hp.com>
> 

Acked-by: Kyle McMartin <kyle@mcmartin.ca>

Re: [patch 09/16] parisc: use generic pci_enable_resources()

[Greg KH]

On Wed, Mar 05, 2008 at 11:17:10AM -0500, Kyle McMartin wrote:
> On Tue, Mar 04, 2008 at 11:56:55AM -0700, Bjorn Helgaas wrote:
> > Use the generic pci_enable_resources() instead of the arch-specific code.
> > 
> > Unlike this arch-specific code, the generic version:
> >     - checks PCI_NUM_RESOURCES (11), not DEVICE_COUNT_RESOURCE (12), resources
> >     - skips resources that have neither IORESOURCE_IO nor IORESOURCE_MEM set
> >     - skips ROM resources unless IORESOURCE_ROM_ENABLE is set
> >     - checks for resource collisions with "!r->parent"
> > 
> > Signed-off-by: Bjorn Helgaas <bjorn.helgaas@hp.com>
> > 
> 
> Acked-by: Kyle McMartin <kyle@mcmartin.ca>

added, thanks.

greg k-h

Re: [patch 01/16] PCI: add generic pci_enable_resources()

[Greg KH]

On Wed, Mar 05, 2008 at 02:53:31PM +0000, David Howells wrote:
> 
> Bjorn Helgaas <bjorn.helgaas@hp.com> wrote:
> 
> > Each architecture has its own pcibios_enable_resources() implementation.
> > These differ in many minor ways that have nothing to do with actual
> > architectural differences.  Follow-on patches will make most arches
> > use this generic version instead.
> > 
> > This version is based on powerpc, which seemed most up-to-date.  The only
> > functional difference from the x86 version is that this uses "!r->parent"
> > to check for resource collisions instead of "!r->start && r->end".
> > 
> > Signed-off-by: Bjorn Helgaas <bjorn.helgaas@hp.com>
> 
> Acked-by: David Howells <dhowells@redhat.com>

added, thanks.

greg k-h

Re: [patch 05/16] frv: use generic pci_enable_resources()

[Greg KH]

On Wed, Mar 05, 2008 at 02:52:46PM +0000, David Howells wrote:
> 
> Bjorn Helgaas <bjorn.helgaas@hp.com> wrote:
> 
> > Use the generic pci_enable_resources() instead of the arch-specific code.
> > 
> > Unlike this arch-specific code, the generic version:
> >     - checks PCI_NUM_RESOURCES (11), not 6, resources
> >     - skips resources that have neither IORESOURCE_IO nor IORESOURCE_MEM set
> >     - skips ROM resources unless IORESOURCE_ROM_ENABLE is set
> >     - checks for resource collisions with "!r->parent"
> > 
> > Signed-off-by: Bjorn Helgaas <bjorn.helgaas@hp.com>
> 
> Acked-by: David Howells <dhowells@redhat.com>

Added, thanks.

greg k-h

Re: [patch 08/16] mn10300: use generic pci_enable_resources()

[Greg KH]

On Wed, Mar 05, 2008 at 03:13:10PM +0000, David Howells wrote:
> 
> Bjorn Helgaas <bjorn.helgaas@hp.com> wrote:
> 
> > Use the generic pci_enable_resources() instead of the arch-specific code.
> > 
> > Unlike this arch-specific code, the generic version:
> >     - checks PCI_NUM_RESOURCES (11), not 6, resources
> >     - skips resources that have neither IORESOURCE_IO nor IORESOURCE_MEM set
> >     - skips ROM resources unless IORESOURCE_ROM_ENABLE is set
> >     - checks for resource collisions with "!r->parent"
> > 
> > Signed-off-by: Bjorn Helgaas <bjorn.helgaas@hp.com>
> 
> Acked-by: David Howells <dhowells@redhat.com>

added, thanks.

greg k-h