pppd/pppoed

pppd/pppoed

[Erik Kunze]

Hi,

I'm trying to port pppd and pppoed to a MPC860T based embedded board
using Hard Hat 1.2 for cross developement. Unfortunately both packages
aren't designed for cross compiling.

Did anyone already port these programs to embedded Linux/PPC?

Erik
--
   Dipl.-Ing. Erik Kunze               Phone: +49 - 89 - 32 14 07 41
   PHILOSYS Software GmbH              Fax:   +49 - 89 - 32 14 07 12
   Edisonstr. 6                        Email: Erik.Kunze@philosys.de
   D-85716 Unterschleissheim           WWW:   www.philosys.de/~kunze

        PGP-Key: http://www.philosys.de/~kunze/public_key.txt

** Sent via the linuxppc-embedded mail list. See http://lists.linuxppc.org/

Re: pppd/pppoed

[Murray Jensen]

[-- Attachment #1: Type: text/plain, Size: 1357 bytes --]

On Fri, 27 Oct 2000 10:32:34 +0200, Erik Kunze <Erik.Kunze@philosys.de> writes:
>I'm trying to port pppd and pppoed to a MPC860T based embedded board
>using Hard Hat 1.2 for cross developement. Unfortunately both packages
>aren't designed for cross compiling.
>
>Did anyone already port these programs to embedded Linux/PPC?

Here are my diffs to ppp-2.3.11 - after applying the patches, run

    ./configure Linux
    make CC=<cross>-gcc INCLDIR=<crossdir>/include LIBRDIR=<crossdir>/lib all

where <cross> is your cross compiler prefix e.g. powerpc-linux, and <crossdir>
is the location of your cross compiler include and library files - something
like /opt/powerpc/<cross>. Probably not a good idea to try to run the "install"
target without setting DESTDIR.

I cross-compile under Solaris 2.7, but it should work for Linux-x86 ->
Linux/PPC also (in fact, because both are linux, you probably don't need the
"Linux" arg to "./configure").

Standard caveat applies - I wrote this message all from memory, check it
out yourself before you run it to be sure that it does what I think it does.
Cheers!
								Murray...
--
Murray Jensen, CSIRO Manufacturing Sci & Tech,         Phone: +61 3 9662 7763
Locked Bag No. 9, Preston, Vic, 3072, Australia.         Fax: +61 3 9662 7853
Internet: Murray.Jensen@cmst.csiro.au  (old address was mjj@mlb.dmt.csiro.au)


[-- Attachment #2: Type: application/x-gzip, Size: 1133 bytes --]

Re: pppd/pppoed

[Tania Boak]

Hi Erik

If you would prefer not to cross compile, Century Systems has a MPC860T based
linux product with an optional hard disk on which you can compile both pppd and
pppoed.  Details at
http://www.centurysys.co.jp/product/eserver/eserverindex.html.

Tania

Erik Kunze wrote:

> Hi,
>
> I'm trying to port pppd and pppoed to a MPC860T based embedded board
> using Hard Hat 1.2 for cross developement. Unfortunately both packages
> aren't designed for cross compiling.
>
> Did anyone already port these programs to embedded Linux/PPC?
>
> Erik
> --
>    Dipl.-Ing. Erik Kunze               Phone: +49 - 89 - 32 14 07 41
>    PHILOSYS Software GmbH              Fax:   +49 - 89 - 32 14 07 12
>    Edisonstr. 6                        Email: Erik.Kunze@philosys.de
>    D-85716 Unterschleissheim           WWW:   www.philosys.de/~kunze
>
>         PGP-Key: http://www.philosys.de/~kunze/public_key.txt
>


** Sent via the linuxppc-embedded mail list. See http://lists.linuxppc.org/