* [BUG]2.6.25-rc6:Unable to handle kernel paging request
@ 2008-03-18 5:29 Sudhir Kumar
2008-03-18 16:04 ` Michael Neuling
2008-03-19 3:57 ` Paul Mackerras
0 siblings, 2 replies; 5+ messages in thread
From: Sudhir Kumar @ 2008-03-18 5:29 UTC (permalink / raw)
To: linux-kernel; +Cc: Poornima Nayak, linuxppc-dev, akpm
Hi,
I found the following bug at kernel boot up on my power machine
with 2.6.25-rc6 kernel.
USB Mass Storage support registered.
mice: PS/2 mouse device common for all mice
Unable to handle kernel paging request for data at address
0xd00008000000002e
Faulting instruction address: 0xc00000000074ded8
cpu 0x0: Vector: 300 (Data Access) at [c00000003e073aa0]
pc: c00000000074ded8: .f71805f_find+0x44/0x32c
lr: c00000000074e1f8: .f71805f_init+0x38/0x194
sp: c00000003e073d20
msr: 8000000000009032
dar: d00008000000002e
dsisr: 42000000
current = 0xc0000000220851c0
paca = 0xc0000000007c2700
pid = 1, comm = swapper
enter ? for help
[c00000003e073dc0] c00000000074e1f8 .f71805f_init+0x38/0x194
[c00000003e073ea0] c000000000724bdc .kernel_init+0x204/0x3c8
[c00000003e073f90] c000000000025df4 .kernel_thread+0x4c/0x68
For further reference some of the debug info is:
0:mon> r
R00 = d00008000000002e R16 = 4000000001c00000
R01 = c00000003e073d20 R17 = c00000000066ecc8
R02 = c0000000008f4458 R18 = 0000000000000000
R03 = 000000000000002e R19 = 00000000003a1000
R04 = c00000003e073e30 R20 = 000000000235a3d0
R05 = c00000003e073e34 R21 = c00000000075a3d0
R06 = 0000000024000044 R22 = 000000000235a640
R07 = c000000000010bcc R23 = c00000000075a640
R08 = c00000003e073570 R24 = c00000000066fe90
R09 = d000080000000000 R25 = 0000000000000000
R10 = cf000000009c2d60 R26 = c00000003e070000
R11 = ffffffffffffff87 R27 = c00000003e073e30
R12 = 0000000000000000 R28 = c00000003e073e34
R13 = c0000000007c2700 R29 = 000000000000002e
R14 = 0000000000000000 R30 = c000000000880278
R15 = c000000000670448 R31 = c00000000078e050
pc = c00000000074ded8 .f71805f_find+0x44/0x32c
lr = c00000000074e1f8 .f71805f_init+0x38/0x194
msr = 8000000000009032 cr = 24000042
ctr = c00000000074e1c0 xer = 0000000000000005 trap = 300
dar = d00008000000002e dsisr = 42000000
0:mon> e
cpu 0x0: Vector: 300 (Data Access) at [c00000003e073aa0]
pc: c00000000074ded8: .f71805f_find+0x44/0x32c
lr: c00000000074e1f8: .f71805f_init+0x38/0x194
sp: c00000003e073d20
msr: 8000000000009032
dar: d00008000000002e
dsisr: 42000000
current = 0xc0000000220851c0
paca = 0xc0000000007c2700
pid = 1, comm = swapper
0:mon> di %pc
c00000000074ded8 7d6919ae stbx r11,r9,r3
c00000000074dedc 39000001 li r8,1
c00000000074dee0 990d01dc stb r8,476(r13)
c00000000074dee4 e93f0000 ld r9,0(r31)
c00000000074dee8 7c034a14 add r0,r3,r9
c00000000074deec 7c0004ac sync
c00000000074def0 7d6919ae stbx r11,r9,r3
c00000000074def4 990d01dc stb r8,476(r13)
c00000000074def8 38800023 li r4,35
c00000000074defc 4bcc95e1 bl c0000000004174dc #
.superio_inw+0x0/0x134
c00000000074df00 3940ffed li r10,-19
c00000000074df04 5463043e clrlwi r3,r3,16
c00000000074df08 2f831934 cmpwi cr7,r3,6452
c00000000074df0c 409e0260 bne cr7,c00000000074e16c #
.f71805f_find+0x2d8/0x32c
c00000000074df10 e93e8038 ld r9,-32712(r30)
c00000000074df14 a0690000 lhz r3,0(r9)
0:mon>
Thanks
Sudhir Kumar
ISTL, IBM
Bangalore
^ permalink raw reply [flat|nested] 5+ messages in thread
* Re: [BUG]2.6.25-rc6:Unable to handle kernel paging request
2008-03-18 5:29 [BUG]2.6.25-rc6:Unable to handle kernel paging request Sudhir Kumar
@ 2008-03-18 16:04 ` Michael Neuling
2008-03-19 3:57 ` Paul Mackerras
1 sibling, 0 replies; 5+ messages in thread
From: Michael Neuling @ 2008-03-18 16:04 UTC (permalink / raw)
To: skumar; +Cc: Poornima Nayak, linuxppc-dev, akpm, linux-kernel
In message <20080318052921.GA32259@in.ibm.com> you wrote:
> Hi,
> I found the following bug at kernel boot up on my power machine
> with 2.6.25-rc6 kernel.
>
> USB Mass Storage support registered.
> mice: PS/2 mouse device common for all mice
> Unable to handle kernel paging request for data at address
> 0xd00008000000002e
> Faulting instruction address: 0xc00000000074ded8
> cpu 0x0: Vector: 300 (Data Access) at [c00000003e073aa0]
> pc: c00000000074ded8: .f71805f_find+0x44/0x32c
> lr: c00000000074e1f8: .f71805f_init+0x38/0x194
> sp: c00000003e073d20
> msr: 8000000000009032
> dar: d00008000000002e
> dsisr: 42000000
> current = 0xc0000000220851c0
> paca = 0xc0000000007c2700
> pid = 1, comm = swapper
> enter ? for help
> [c00000003e073dc0] c00000000074e1f8 .f71805f_init+0x38/0x194
> [c00000003e073ea0] c000000000724bdc .kernel_init+0x204/0x3c8
> [c00000003e073f90] c000000000025df4 .kernel_thread+0x4c/0x68
Is this an all yes or random config? CONFIG_SENSORS_F71805F doesn't
appear in any of the powerpc def configs.
Anyway, I'm guessing the driver hasn't checked the device tree and is
probing somewhere it shouldn't.
Mikey
>
> For further reference some of the debug info is:
> 0:mon> r
> R00 = d00008000000002e R16 = 4000000001c00000
> R01 = c00000003e073d20 R17 = c00000000066ecc8
> R02 = c0000000008f4458 R18 = 0000000000000000
> R03 = 000000000000002e R19 = 00000000003a1000
> R04 = c00000003e073e30 R20 = 000000000235a3d0
> R05 = c00000003e073e34 R21 = c00000000075a3d0
> R06 = 0000000024000044 R22 = 000000000235a640
> R07 = c000000000010bcc R23 = c00000000075a640
> R08 = c00000003e073570 R24 = c00000000066fe90
> R09 = d000080000000000 R25 = 0000000000000000
> R10 = cf000000009c2d60 R26 = c00000003e070000
> R11 = ffffffffffffff87 R27 = c00000003e073e30
> R12 = 0000000000000000 R28 = c00000003e073e34
> R13 = c0000000007c2700 R29 = 000000000000002e
> R14 = 0000000000000000 R30 = c000000000880278
> R15 = c000000000670448 R31 = c00000000078e050
> pc = c00000000074ded8 .f71805f_find+0x44/0x32c
> lr = c00000000074e1f8 .f71805f_init+0x38/0x194
> msr = 8000000000009032 cr = 24000042
> ctr = c00000000074e1c0 xer = 0000000000000005 trap = 300
> dar = d00008000000002e dsisr = 42000000
>
> 0:mon> e
> cpu 0x0: Vector: 300 (Data Access) at [c00000003e073aa0]
> pc: c00000000074ded8: .f71805f_find+0x44/0x32c
> lr: c00000000074e1f8: .f71805f_init+0x38/0x194
> sp: c00000003e073d20
> msr: 8000000000009032
> dar: d00008000000002e
> dsisr: 42000000
> current = 0xc0000000220851c0
> paca = 0xc0000000007c2700
> pid = 1, comm = swapper
>
> 0:mon> di %pc
> c00000000074ded8 7d6919ae stbx r11,r9,r3
> c00000000074dedc 39000001 li r8,1
> c00000000074dee0 990d01dc stb r8,476(r13)
> c00000000074dee4 e93f0000 ld r9,0(r31)
> c00000000074dee8 7c034a14 add r0,r3,r9
> c00000000074deec 7c0004ac sync
> c00000000074def0 7d6919ae stbx r11,r9,r3
> c00000000074def4 990d01dc stb r8,476(r13)
> c00000000074def8 38800023 li r4,35
> c00000000074defc 4bcc95e1 bl c0000000004174dc #
> .superio_inw+0x0/0x134
> c00000000074df00 3940ffed li r10,-19
> c00000000074df04 5463043e clrlwi r3,r3,16
> c00000000074df08 2f831934 cmpwi cr7,r3,6452
> c00000000074df0c 409e0260 bne cr7,c00000000074e16c #
> .f71805f_find+0x2d8/0x32c
> c00000000074df10 e93e8038 ld r9,-32712(r30)
> c00000000074df14 a0690000 lhz r3,0(r9)
> 0:mon>
>
> Thanks
> Sudhir Kumar
> ISTL, IBM
> Bangalore
> _______________________________________________
> Linuxppc-dev mailing list
> Linuxppc-dev@ozlabs.org
> https://ozlabs.org/mailman/listinfo/linuxppc-dev
>
^ permalink raw reply [flat|nested] 5+ messages in thread
* Re: [BUG]2.6.25-rc6:Unable to handle kernel paging request
2008-03-18 5:29 [BUG]2.6.25-rc6:Unable to handle kernel paging request Sudhir Kumar
2008-03-18 16:04 ` Michael Neuling
@ 2008-03-19 3:57 ` Paul Mackerras
2008-03-20 18:42 ` Sudhir Kumar
1 sibling, 1 reply; 5+ messages in thread
From: Paul Mackerras @ 2008-03-19 3:57 UTC (permalink / raw)
To: skumar; +Cc: Poornima Nayak, linuxppc-dev, akpm, linux-kernel
Sudhir Kumar writes:
> Unable to handle kernel paging request for data at address
> 0xd00008000000002e
Looks like some driver tried to access I/O port 0x2e without checking
whether there was possibly anything there first.
> Faulting instruction address: 0xc00000000074ded8
> cpu 0x0: Vector: 300 (Data Access) at [c00000003e073aa0]
> pc: c00000000074ded8: .f71805f_find+0x44/0x32c
> lr: c00000000074e1f8: .f71805f_init+0x38/0x194
> sp: c00000003e073d20
> msr: 8000000000009032
> dar: d00008000000002e
> dsisr: 42000000
> current = 0xc0000000220851c0
> paca = 0xc0000000007c2700
> pid = 1, comm = swapper
> enter ? for help
> [c00000003e073dc0] c00000000074e1f8 .f71805f_init+0x38/0x194
Looks like it might be the f71805f driver, whatever that is...
Hmmm, drivers/hwmon/f71805f.c looks like it, and indeed it does go
poking around in PCI I/O space with no checks whatever.
I suggest you turn off CONFIG_SENSORS_F71805F.
It doesn't help, of course, that CONFIG_HWMON defaults to y. :(
Paul.
^ permalink raw reply [flat|nested] 5+ messages in thread
* Re: [BUG]2.6.25-rc6:Unable to handle kernel paging request
2008-03-19 3:57 ` Paul Mackerras
@ 2008-03-20 18:42 ` Sudhir Kumar
2008-03-21 9:07 ` Paul Mackerras
0 siblings, 1 reply; 5+ messages in thread
From: Sudhir Kumar @ 2008-03-20 18:42 UTC (permalink / raw)
To: Paul Mackerras; +Cc: Poornima Nayak, linuxppc-dev, akpm, skumar, linux-kernel
On Wed, Mar 19, 2008 at 02:57:50PM +1100, Paul Mackerras wrote:
> Sudhir Kumar writes:
>
> > Unable to handle kernel paging request for data at address
> > 0xd00008000000002e
>
> Looks like some driver tried to access I/O port 0x2e without checking
> whether there was possibly anything there first.
>
> > Faulting instruction address: 0xc00000000074ded8
> > cpu 0x0: Vector: 300 (Data Access) at [c00000003e073aa0]
> > pc: c00000000074ded8: .f71805f_find+0x44/0x32c
> > lr: c00000000074e1f8: .f71805f_init+0x38/0x194
> > sp: c00000003e073d20
> > msr: 8000000000009032
> > dar: d00008000000002e
> > dsisr: 42000000
> > current = 0xc0000000220851c0
> > paca = 0xc0000000007c2700
> > pid = 1, comm = swapper
> > enter ? for help
> > [c00000003e073dc0] c00000000074e1f8 .f71805f_init+0x38/0x194
>
> Looks like it might be the f71805f driver, whatever that is...
> Hmmm, drivers/hwmon/f71805f.c looks like it, and indeed it does go
> poking around in PCI I/O space with no checks whatever.
>
> I suggest you turn off CONFIG_SENSORS_F71805F.
It was a new feature so I turned it on while compiling.
I have tried by turning off CONFIG_SENSORS_F71805F but the bug
is still present.
>
> It doesn't help, of course, that CONFIG_HWMON defaults to y. :(
>
> Paul.
Thanks
Sudhir Kumar
ISTL IBM
^ permalink raw reply [flat|nested] 5+ messages in thread
* Re: [BUG]2.6.25-rc6:Unable to handle kernel paging request
2008-03-20 18:42 ` Sudhir Kumar
@ 2008-03-21 9:07 ` Paul Mackerras
0 siblings, 0 replies; 5+ messages in thread
From: Paul Mackerras @ 2008-03-21 9:07 UTC (permalink / raw)
To: skumar; +Cc: Poornima Nayak, linuxppc-dev, akpm, linux-kernel
Sudhir Kumar writes:
> > I suggest you turn off CONFIG_SENSORS_F71805F.
> It was a new feature so I turned it on while compiling.
> I have tried by turning off CONFIG_SENSORS_F71805F but the bug
> is still present.
Do you mean that you still saw a crash in f71805f_find? If so, then
you have some problem with the way you rebuilt the kernel, or you
didn't boot the kernel you thought you did, or possibly that
CONFIG_SENSORS_F71805F is getting turned back on by a select statement
somewhere in some Kconfig file.
If you really turned CONFIG_SENSORS_F71805F off then there would be no
f71805f_find function in the kernel.
Paul.
^ permalink raw reply [flat|nested] 5+ messages in thread
end of thread, other threads:[~2008-03-21 9:07 UTC | newest]
Thread overview: 5+ messages (download: mbox.gz follow: Atom feed
-- links below jump to the message on this page --
2008-03-18 5:29 [BUG]2.6.25-rc6:Unable to handle kernel paging request Sudhir Kumar
2008-03-18 16:04 ` Michael Neuling
2008-03-19 3:57 ` Paul Mackerras
2008-03-20 18:42 ` Sudhir Kumar
2008-03-21 9:07 ` Paul Mackerras
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).