From mboxrd@z Thu Jan 1 00:00:00 1970 Return-Path: In-Reply-To: <1109951593.32294.5.camel@x.at.lan> References: <1109951593.32294.5.camel@x.at.lan> Mime-Version: 1.0 (Apple Message framework v619.2) Content-Type: text/plain; charset=UTF-8; format=flowed Message-Id: <22ff4416fc868b02d37f46a31869e3f9@freescale.com> From: Kumar Gala Date: Fri, 4 Mar 2005 10:18:18 -0600 To: =?UTF-8?Q?Jaka_Mo=C4=8Dnik?= Cc: Embedded PPC Linux Mailing List Subject: Re: U-Boot hangs in relocate_code after sw reboot List-Id: Linux on Embedded PowerPC Developers Mail List List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , This is better posted to the u-boot-users list=20 (u-boot-users@lists.sourceforge.net) - kumar On Mar 4, 2005, at 9:53 AM, Jaka Mo=C4=8Dnik wrote: > hello! > > I don't really know if this mailing list is the proper place to direct > questions regarding U-Boot, but I've seen some preceding posts about=20= > it, > so I thought I'd ask... > > I've ported U-Boot over to a custom MPC8560 (PQ3) based board - it=20 > works > well, except that after a sw reboot (from linux kernel or u-boot > itself), it only gets to the part where it relocates itself to RAM = and > then hangs - the last debug output is > > Relocating code to 07fd4000... > > and the famous > > Now running in RAM - U-Boot at: 07fd4000 never shows up. > > has anyone experienced similar problems? any hints on what to look at? > > regards, > =C2=A0=C2=A0=C2=A0=C2=A0=C2=A0=C2=A0=C2=A0 jaKa > > --=20 > > w3: http://fish.homeunix.org/people/jaka > email: jaka@activetools.si > > _______________________________________________ > Linuxppc-embedded mailing list > Linuxppc-embedded@ozlabs.org > https://ozlabs.org/mailman/listinfo/linuxppc-embedded