linuxppc-dev.lists.ozlabs.org archive mirror
 help / color / mirror / Atom feed
From: zjzhou@newrocktech.com
To: linuxppc-embedded@lists.linuxppc.org
Subject: about MPC852T board
Date: Sat, 28 Feb 2004 18:22:41 +0800 (CST)	[thread overview]
Message-ID: <2432.221.137.49.91.1077963761.squirrel@mail.newrocktech.com> (raw)
In-Reply-To: <403F6E60.1010404@euronet.nl>


Dear All,

I know the board based on mpc852T supported by ELDK3.0 are AdderII and
MPC86xADS.

Could you tell me which boards based on MPC852T are supported by ELDK3.0
except AdderII and MPC86xADS?

Thanks in advance!
John

> Hegde, Ashok wrote:
>
>> I want to test my serial driver at higher speeds, How to test serial
>> data transfer up to 1.5Mbps speed. Is it zmodem protocol supports
>> this speed? I am able to test it (using zmodem protocol )up to 115K,
>> beyond this I am facing problem.
>
> You mentioned 115k2, probably an async port. Do you want to run async
> at 1,5mbit/s? What kind of device will that be? I think the zmodem
> protocol does not mind to be used at higher rates :o) Your problem is
> probably somewhere else. (drivers?)

** Sent via the linuxppc-embedded mail list. See http://lists.linuxppc.org/

  reply	other threads:[~2004-02-28 10:22 UTC|newest]

Thread overview: 4+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2004-02-27 10:25 How to test Serial data transfer beyond 115k up to 1.5Mbps Hegde, Ashok
2004-02-27 16:20 ` Jos Beck II
2004-02-28 10:22   ` zjzhou [this message]
2004-02-29 16:27     ` about MPC852T board Wolfgang Denk

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=2432.221.137.49.91.1077963761.squirrel@mail.newrocktech.com \
    --to=zjzhou@newrocktech.com \
    --cc=linuxppc-embedded@lists.linuxppc.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body. 
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).