[PATCH v3 2/8] PCI: Cleanup struct aer_err_info

[Naveen Naidu <naveennaidu479@gmail.com>]

The id, status and the mask fields of the struct aer_err_info comes
directly from the registers, hence their sizes should be explicit.

The length of these registers are:
  - id: 16 bits - Represents the Error Source Requester ID
  - status: 32 bits - COR/UNCOR Error Status
  - mask: 32 bits - COR/UNCOR Error Mask

Since the length of the above registers are even, use u16 and u32
to represent their values.

Also remove the __pad fields.

"pahole" was run on the modified struct aer_err_info and the size
remains unchanged.

Signed-off-by: Naveen Naidu <naveennaidu479@gmail.com>
---
 drivers/pci/pci.h | 8 +++-----
 1 file changed, 3 insertions(+), 5 deletions(-)

diff --git a/drivers/pci/pci.h b/drivers/pci/pci.h
index 1cce56c2aea0..9be7a966fda7 100644
--- a/drivers/pci/pci.h
+++ b/drivers/pci/pci.h
@@ -427,18 +427,16 @@ struct aer_err_info {
 	struct pci_dev *dev[AER_MAX_MULTI_ERR_DEVICES];
 	int error_dev_num;
 
-	unsigned int id:16;
+	u16	id;
 
 	unsigned int severity:2;	/* 0:NONFATAL | 1:FATAL | 2:COR */
-	unsigned int __pad1:5;
 	unsigned int multi_error_valid:1;
 
 	unsigned int first_error:5;
-	unsigned int __pad2:2;
 	unsigned int tlp_header_valid:1;
 
-	unsigned int status;		/* COR/UNCOR Error Status */
-	unsigned int mask;		/* COR/UNCOR Error Mask */
+	u32 status;		/* COR/UNCOR Error Status */
+	u32 mask;		/* COR/UNCOR Error Mask */
 	struct aer_header_log_regs tlp;	/* TLP Header */
 };
 
-- 
2.25.1