From mboxrd@z Thu Jan  1 00:00:00 1970
Return-Path: <gnathita@gmail.com>
Received: from zproxy.gmail.com (zproxy.gmail.com [64.233.162.206])
	by ozlabs.org (Postfix) with ESMTP id 541FA68926
	for <linuxppc-embedded@ozlabs.org>;
	Wed, 11 Jan 2006 03:20:27 +1100 (EST)
Received: by zproxy.gmail.com with SMTP id l8so366881nzf
	for <linuxppc-embedded@ozlabs.org>;
	Tue, 10 Jan 2006 08:20:27 -0800 (PST)
Message-ID: <259581790601100820s42d1a311ye40bfcf4ba6c9bd5@mail.gmail.com>
Date: Tue, 10 Jan 2006 17:20:26 +0100
From: =?ISO-8859-1?Q?Paula_Saame=F1o?= <gnathita@gmail.com>
To: linuxppc-embedded@ozlabs.org
MIME-Version: 1.0
Content-Type: multipart/alternative;
	boundary="----=_Part_16299_18720377.1136910026737"
Subject: Error: Three ML403 boards
List-Id: Linux on Embedded PowerPC Developers Mail List
	<linuxppc-embedded.ozlabs.org>
List-Unsubscribe: <https://ozlabs.org/mailman/listinfo/linuxppc-embedded>,
	<mailto:linuxppc-embedded-request@ozlabs.org?subject=unsubscribe>
List-Archive: <http://ozlabs.org/pipermail/linuxppc-embedded>
List-Post: <mailto:linuxppc-embedded@ozlabs.org>
List-Help: <mailto:linuxppc-embedded-request@ozlabs.org?subject=help>
List-Subscribe: <https://ozlabs.org/mailman/listinfo/linuxppc-embedded>,
	<mailto:linuxppc-embedded-request@ozlabs.org?subject=subscribe>

------=_Part_16299_18720377.1136910026737
Content-Type: text/plain; charset=ISO-8859-1
Content-Transfer-Encoding: quoted-printable
Content-Disposition: inline

Hello,

I have 3 Xilinx ML403 boards. I have implemented a 2.4 kernel with a basic
configuration, with network support, systemACE, IIC... and it works
perfectly in one of them.

However, when I put the ACE card, without making any change, in other ML403
board, it does not work. The .ace file is loaded ok but then the network
leds (6 leds) start blinking and nothing else happens.

I have tried with two ML403 different boards, and I have no idea of where
the problem is. They should work in the same way, don't they?

Any help would be great.

Also, I am trying to load a 2.6 kernel, but I am still on the way. I will
let you know if I get it working.

Thanks a lot!
Paula

------=_Part_16299_18720377.1136910026737
Content-Type: text/html; charset=ISO-8859-1
Content-Transfer-Encoding: quoted-printable
Content-Disposition: inline

Hello,<br>
<br>
I have 3 Xilinx ML403 boards. I have implemented a 2.4 kernel with a
basic configuration, with network support, systemACE, IIC... and it
works perfectly in one of them.<br>
<br>
However, when I put the ACE card, without making any change, in other
ML403 board, it does not work. The .ace file is loaded ok but then the
network leds (6 leds) start blinking and nothing else happens.<br>
<br>
I have tried with two ML403 different boards, and I have no idea of
where the problem is. They should work in the same way, don't they?<br>
<br>
Any help would be great.<br>
<br>
Also, I am trying to load a 2.6 kernel, but I am still on the way. I will l=
et you know if I get it working.<br>
<br>
Thanks a lot!<br>
Paula<br>

------=_Part_16299_18720377.1136910026737--