Re: Error: Three ML403 boards

["Paula Saameño" <gnathita@gmail.com>]

[-- Attachment #1: Type: text/plain, Size: 1649 bytes --]

Hi, Peter,

I have already checked that record, and even fixing that bug and adding the
C_APU_CONTROL parameter, it still does not work in any board but one.

Anyone has suffered the same issue or have any idea of why it is happening??

Thanks a lot!
Paula


On 1/10/06, Peter Ryser <peter.ryser@xilinx.com> wrote:
>
> Paula,
>
> please verify that you are not running into the problem described in
> Xilinx Answer Record 22179
> (
> http://www.xilinx.com/xlnx/xil_ans_display.jsp?iLanguageID=1&iCountryID=1&getPagePath=22179
> ).
>
> - Peter
>
>
> Paula Saameño wrote:
>
> > Hello,
> >
> > I have 3 Xilinx ML403 boards. I have implemented a 2.4 kernel with a
> > basic configuration, with network support, systemACE, IIC... and it
> > works perfectly in one of them.
> >
> > However, when I put the ACE card, without making any change, in other
> > ML403 board, it does not work. The .ace file is loaded ok but then the
> > network leds (6 leds) start blinking and nothing else happens.
> >
> > I have tried with two ML403 different boards, and I have no idea of
> > where the problem is. They should work in the same way, don't they?
> >
> > Any help would be great.
> >
> > Also, I am trying to load a 2.6 kernel, but I am still on the way. I
> > will let you know if I get it working.
> >
> > Thanks a lot!
> > Paula
> >
> >------------------------------------------------------------------------
> >
> >_______________________________________________
> >Linuxppc-embedded mailing list
> >Linuxppc-embedded@ozlabs.org
> >https://ozlabs.org/mailman/listinfo/linuxppc-embedded
> >
>
>
>
>

[-- Attachment #2: Type: text/html, Size: 2298 bytes --]