From: "acrux_it@libero.it" <acrux_it@libero.it>
To: linuxppc-dev@lists.ozlabs.org
Subject: pata_sl82c105 is unable to properly handle dma (indeed it try to use mwdma2)
Date: Wed, 7 Dec 2011 02:15:00 +0100 (CET) [thread overview]
Message-ID: <28546010.491181323220500482.JavaMail.defaultUser@defaultHost> (raw)
New pata_sl82c105 is unable to properly handle dma (indeed it try to use
mwdma2).
Old ide driver instead worked fine.
Tested on IBM 9114-275 where to use it i must boot with dma disabled i.e. with
libata.dma=0
[...]
pata_sl82c105 0000:00:03.1: enabling device (0144 -> 0145)
scsi1 : pata_sl82c105
scsi2 : pata_sl82c105
ata1: PATA max MWDMA2 cmd 0x1f000 ctl 0x1f010 bmdma 0x1f040 irq 165
ata2: PATA max MWDMA2 cmd 0x1f020 ctl 0x1f030 bmdma 0x1f048 irq 165
ata1.00: ATAPI: IBM DROM00205, NR38, max UDMA/33
ata1.00: configured for MWDMA2
[...]
scsi 1:0:0:0: CD-ROM IBM DROM00205 NR38 PQ: 0 ANSI: 2
sr0: scsi3-mmc drive: 24x/24x cd/rw xa/form2 cdda tray
cdrom: Uniform CD-ROM driver Revision: 3.20
sr 1:0:0:0: Attached scsi generic sg3 type 5
[...]
ata1: lost interrupt (Status 0x50)
ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x6 frozen
sr 1:0:0:0: CDB: Get configuration: 46 00 00 00 00 00 00 00 20 00
ata1.00: cmd a0/01:00:00:20:00/00:00:00:00:00/a0 tag 0 dma 16416 in
res 40/00:02:00:0c:00/00:00:00:00:00/a0 Emask 0x4 (timeout)
ata1.00: status: { DRDY }
ata1: soft resetting link
ata1.00: configured for MWDMA2
ata1: EH complete
sr0: CDROM (ioctl) error, command: Get configuration 46 00 00 00 00 00 00 00
20 00
sr: Sense Key : Aborted Command [current] [descriptor]
sr: Add. Sense: No additional sense information
ata1: lost interrupt (Status 0x50)
ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x6 frozen
sr 1:0:0:0: CDB: Xdread, Read track info: 52 01 00 00 00 01 00 00 20 00
ata1.00: cmd a0/01:00:00:20:00/00:00:00:00:00/a0 tag 0 dma 16416 in
res 40/00:02:00:08:00/00:00:00:00:00/a0 Emask 0x4 (timeout)
ata1.00: status: { DRDY }
ata1: soft resetting link
ata1.00: configured for MWDMA2
ata1: EH complete
sr0: CDROM (ioctl) error, command: Xdread, Read track info 52 01 00 00 00 01
00 000
sr: Sense Key : Aborted Command [current] [descriptor]
sr: Add. Sense: No additional sense information
ata1: lost interrupt (Status 0x50)
ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x6 frozen
sr 1:0:0:0: CDB: Get configuration: 46 00 00 00 00 00 00 00 20 00
ata1.00: cmd a0/01:00:00:20:00/00:00:00:00:00/a0 tag 0 dma 16416 in
res 40/00:02:00:0c:00/00:00:00:00:00/a0 Emask 0x4 (timeout)
ata1.00: status: { DRDY }
ata1: soft resetting link
ata1.00: configured for MWDMA2
ata1: EH complete
sr0: CDROM (ioctl) error, command: Get configuration 46 00 00 00 00 00 00 00
20 00
sr: Sense Key : Aborted Command [current] [descriptor]
sr: Add. Sense: No additional sense information
ata1: lost interrupt (Status 0x50)
ata1.00: limiting speed to MWDMA1:PIO4
ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x6 frozen
sr 1:0:0:0: CDB: Get configuration: 46 00 00 00 00 00 00 00 20 00
ata1.00: cmd a0/01:00:00:20:00/00:00:00:00:00/a0 tag 0 dma 16416 in
res 40/00:02:00:0c:00/00:00:00:00:00/a0 Emask 0x4 (timeout)
ata1.00: status: { DRDY }
ata1: soft resetting link
ata1.00: configured for MWDMA1
ata1: EH complete
sr0: CDROM (ioctl) error, command: Get configuration 46 00 00 00 00 00 00 00
20 00
sr: Sense Key : Aborted Command [current] [descriptor]
sr: Add. Sense: No additional sense information
ata1: lost interrupt (Status 0x50)
ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x6 frozen
sr 1:0:0:0: CDB: Get configuration: 46 00 00 00 00 00 00 00 20 00
ata1.00: cmd a0/01:00:00:20:00/00:00:00:00:00/a0 tag 0 dma 16416 in
res 40/00:02:00:0c:00/00:00:00:00:00/a0 Emask 0x4 (timeout)
ata1.00: status: { DRDY }
ata1: soft resetting link
ata1.00: configured for MWDMA1
ata1: EH complete
sr0: CDROM (ioctl) error, command: Get configuration 46 00 00 00 00 00 00 00
20 00
sr: Sense Key : Aborted Command [current] [descriptor]
sr: Add. Sense: No additional sense information
ata1: lost interrupt (Status 0x50)
ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x6 frozen
sr 1:0:0:0: CDB: Get configuration: 46 00 00 00 00 00 00 00 20 00
ata1.00: cmd a0/01:00:00:20:00/00:00:00:00:00/a0 tag 0 dma 16416 in
res 40/00:02:00:0c:00/00:00:00:00:00/a0 Emask 0x4 (timeout)
ata1.00: status: { DRDY }
ata1: soft resetting link
ata1.00: configured for MWDMA1
ata1: EH complete
sr0: CDROM (ioctl) error, command: Get configuration 46 00 00 00 00 00 00 00
20 00
sr: Sense Key : Aborted Command [current] [descriptor]
sr: Add. Sense: No additional sense information
ata1: lost interrupt (Status 0x50)
ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x6 frozen
sr 1:0:0:0: CDB: Get configuration: 46 00 00 00 00 00 00 00 20 00
ata1.00: cmd a0/01:00:00:20:00/00:00:00:00:00/a0 tag 0 dma 16416 in
res 40/00:02:00:0c:00/00:00:00:00:00/a0 Emask 0x4 (timeout)
ata1.00: status: { DRDY }
ata1: soft resetting link
ata1.00: configured for MWDMA1
ata1: EH complete
sr0: CDROM (ioctl) error, command: Get configuration 46 00 00 00 00 00 00 00
20 00
sr: Sense Key : Aborted Command [current] [descriptor]
sr: Add. Sense: No additional sense information
ata1: lost interrupt (Status 0x50)
ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x6 frozen
sr 1:0:0:0: CDB: Get configuration: 46 00 00 00 00 00 00 00 20 00
ata1.00: cmd a0/01:00:00:20:00/00:00:00:00:00/a0 tag 0 dma 16416 in
res 40/00:02:00:0c:00/00:00:00:00:00/a0 Emask 0x4 (timeout)
ata1.00: status: { DRDY }
ata1: soft resetting link
ata1.00: configured for MWDMA1
ata1: EH complete
cheers,
--nico
next reply other threads:[~2011-12-07 1:15 UTC|newest]
Thread overview: 3+ messages / expand[flat|nested] mbox.gz Atom feed top
2011-12-07 1:15 acrux_it [this message]
2011-12-07 2:21 ` pata_sl82c105 is unable to properly handle dma (indeed it try to use mwdma2) Benjamin Herrenschmidt
2011-12-07 19:30 ` acrux
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=28546010.491181323220500482.JavaMail.defaultUser@defaultHost \
--to=acrux_it@libero.it \
--cc=linuxppc-dev@lists.ozlabs.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).