From: Michael Neuling <mikey@neuling.org>
To: Kumar Gala <galak@kernel.crashing.org>
Cc: linuxppc-dev@ozlabs.org, Paul Mackerras <paulus@samba.org>
Subject: Re: [PATCH 5/9] powerpc: Introduce VSX thread_struct and CONFIG_VSX
Date: Thu, 19 Jun 2008 16:01:20 +1000 [thread overview]
Message-ID: <29411.1213855280@neuling.org> (raw)
In-Reply-To: <B0E87874-BC65-4037-A43D-91C4142475E7@kernel.crashing.org>
In message <B0E87874-BC65-4037-A43D-91C4142475E7@kernel.crashing.org> you wrote
:
> >>>>> + } fpvsr __attribute__((aligned(16)));
> >>>>
> >>>> Do we really need a union here? what would happen if you just
> >>>> changed
> >>>> the type of fpr[32] from double to vector if #CONFIG_VSX?
> >>>>
> >>>> I really dont like the union and think we can just make the storage
> >>>> look opaque which is the key. I doubt we every really care about
> >>>> using fpr[] as a double in the kernel.
> >>>
> >>> I did something similar to this for the first cut of this patch, but
> >>> it
> >>> made the code accessing this structure much less readable.
> >>
> >> really, what code is that?
> >
> > Any code that has to read/write the top or bottom 64 bits _only_ of
> > the
> > 128 bit vector.
> >
> > The signals code is a good example where, for backwards compatibility,
> > we need to read/write the old 64 bit FP regs, from the 128 bit value
> > in
> > the struct.
> >
> > Similarly, the way we've extended the signals interface for VSX, you
> > need to read/write out the bottom 64 bits (vsrlow) of a 128 bit value.
> >
> > eg. the simple:
> > current->thread.fpvsr.fp[i].vsrlow = buf[i]
> > would turn into some abomination/macro.
>
> it would turn into something like:
>
> current->thread.fpr[i][2] = buf[i];
> current->thread.fpr[i][3] = buf[i+1];
Maybe abomination was going too far :-)
I still think using the union makes it is easier to read than what you
have here. Also, it better reflects the structure of what's being
stored there.
Mikey
> if you look at your code you'll see there are only a few places you
> accessing the union as fpvsr.vsr[] and those places could easily be
> fpr[], since they are already #CONFIG_VSX protected.
next prev parent reply other threads:[~2008-06-19 6:01 UTC|newest]
Thread overview: 106+ messages / expand[flat|nested] mbox.gz Atom feed top
2008-06-18 0:47 [PATCH 0/9] powerpc: Add kernel support for POWER7 VSX Michael Neuling
2008-06-18 0:47 ` [PATCH 2/9] powerpc: Add macros to access floating point registers in thread_struct Michael Neuling
2008-06-18 0:47 ` [PATCH 1/9] powerpc: Fix msr setting in 32 bit signal code Michael Neuling
2008-06-18 14:53 ` Kumar Gala
2008-06-18 23:55 ` Michael Neuling
2008-06-18 0:47 ` [PATCH 4/9] powerpc: Make load_up_fpu and load_up_altivec callable Michael Neuling
2008-06-18 0:47 ` [PATCH 5/9] powerpc: Introduce VSX thread_struct and CONFIG_VSX Michael Neuling
2008-06-18 19:35 ` Kumar Gala
2008-06-18 22:58 ` Paul Mackerras
2008-06-19 4:13 ` Kumar Gala
2008-06-19 4:30 ` Michael Neuling
2008-06-19 4:22 ` Kumar Gala
2008-06-19 4:35 ` Michael Neuling
2008-06-19 4:58 ` Kumar Gala
2008-06-19 5:37 ` Michael Neuling
2008-06-19 5:47 ` Kumar Gala
2008-06-19 6:01 ` Michael Neuling [this message]
2008-06-19 6:10 ` Kumar Gala
2008-06-19 9:33 ` Benjamin Herrenschmidt
2008-06-19 13:24 ` Kumar Gala
2008-06-18 0:47 ` [PATCH 3/9] powerpc: Move altivec_unavailable Michael Neuling
2008-06-18 0:47 ` [PATCH 6/9] powerpc: Add VSX CPU feature Michael Neuling
2008-06-18 16:28 ` Joel Schopp
2008-06-19 6:51 ` David Woodhouse
2008-06-19 7:00 ` Michael Neuling
2008-06-18 0:47 ` [PATCH 9/9] powerpc: Add CONFIG_VSX config option Michael Neuling
2008-06-18 0:47 ` [PATCH 7/9] powerpc: Add VSX assembler code macros Michael Neuling
2008-06-18 0:47 ` [PATCH 8/9] powerpc: Add VSX context save/restore, ptrace and signal support Michael Neuling
2008-06-18 13:05 ` [PATCH 0/9] powerpc: Add kernel support for POWER7 VSX Kumar Gala
2008-06-18 23:54 ` Michael Neuling
2008-06-20 4:13 ` Michael Neuling
2008-06-20 4:13 ` [PATCH 8/9] powerpc: Add VSX context save/restore, ptrace and signal support Michael Neuling
2008-06-20 4:13 ` [PATCH 4/9] powerpc: Make load_up_fpu and load_up_altivec callable Michael Neuling
2008-06-20 4:13 ` [PATCH 6/9] powerpc: Add VSX CPU feature Michael Neuling
2008-06-20 4:13 ` [PATCH 3/9] powerpc: Move altivec_unavailable Michael Neuling
2008-06-20 4:13 ` [PATCH 5/9] powerpc: Introduce VSX thread_struct and CONFIG_VSX Michael Neuling
2008-06-20 6:44 ` Kumar Gala
2008-06-20 4:13 ` [PATCH 1/9] powerpc: Fix msr setting in 32 bit signal code Michael Neuling
2008-06-20 6:35 ` Kumar Gala
2008-06-20 4:13 ` [PATCH 7/9] powerpc: Add VSX assembler code macros Michael Neuling
2008-06-20 4:13 ` [PATCH 9/9] powerpc: Add CONFIG_VSX config option Michael Neuling
2008-06-20 4:13 ` [PATCH 2/9] powerpc: Add macros to access floating point registers in thread_struct Michael Neuling
2008-06-20 6:39 ` Kumar Gala
2008-06-22 11:29 ` Michael Neuling
2008-06-20 6:37 ` [PATCH 0/9] powerpc: Add kernel support for POWER7 VSX Kumar Gala
2008-06-20 8:15 ` Michael Neuling
2008-06-23 5:31 ` Michael Neuling
2008-06-23 5:31 ` [PATCH 4/9] powerpc: Make load_up_fpu and load_up_altivec callable Michael Neuling
2008-06-23 5:31 ` [PATCH 3/9] powerpc: Move altivec_unavailable Michael Neuling
2008-06-23 5:31 ` [PATCH 2/9] powerpc: Add macros to access floating point registers in thread_struct Michael Neuling
2008-06-23 5:31 ` [PATCH 1/9] powerpc: Fix msr setting in 32 bit signal code Michael Neuling
2008-06-23 5:31 ` [PATCH 8/9] powerpc: Add VSX context save/restore, ptrace and signal support Michael Neuling
2008-06-23 5:31 ` [PATCH 5/9] powerpc: Introduce VSX thread_struct and CONFIG_VSX Michael Neuling
2008-06-23 5:31 ` [PATCH 9/9] powerpc: Add CONFIG_VSX config option Michael Neuling
2008-06-23 5:31 ` [PATCH 7/9] powerpc: Add VSX assembler code macros Michael Neuling
2008-06-23 5:31 ` [PATCH 6/9] powerpc: Add VSX CPU feature Michael Neuling
2008-06-23 7:38 ` [PATCH 0/9] powerpc: Add kernel support for POWER7 VSX Michael Neuling
2008-06-23 7:38 ` [PATCH 1/9] powerpc: Fix msr setting in 32 bit signal code Michael Neuling
2008-06-23 14:46 ` Kumar Gala
2008-06-23 7:38 ` [PATCH 2/9] powerpc: Add macros to access floating point registers in thread_struct Michael Neuling
2008-06-23 7:38 ` [PATCH 7/9] powerpc: Add VSX assembler code macros Michael Neuling
2008-06-23 7:38 ` [PATCH 4/9] powerpc: Make load_up_fpu and load_up_altivec callable Michael Neuling
2008-06-23 7:38 ` [PATCH 3/9] powerpc: Move altivec_unavailable Michael Neuling
2008-06-23 7:38 ` [PATCH 9/9] powerpc: Add CONFIG_VSX config option Michael Neuling
2008-06-23 7:38 ` [PATCH 5/9] powerpc: Introduce VSX thread_struct and CONFIG_VSX Michael Neuling
2008-06-23 7:38 ` [PATCH 8/9] powerpc: Add VSX context save/restore, ptrace and signal support Michael Neuling
2008-06-23 7:38 ` [PATCH 6/9] powerpc: Add VSX CPU feature Michael Neuling
2008-06-24 10:57 ` [PATCH 0/9] powerpc: Add kernel support for POWER7 VSX Michael Neuling
2008-06-24 10:57 ` [PATCH 3/9] powerpc: Move altivec_unavailable Michael Neuling
2008-06-24 10:57 ` [PATCH 2/9] powerpc: Add macros to access floating point registers in thread_struct Michael Neuling
2008-06-24 14:07 ` Kumar Gala
2008-06-24 16:33 ` Segher Boessenkool
2008-06-25 0:25 ` Michael Neuling
2008-06-24 10:57 ` [PATCH 1/9] powerpc: Fix msr setting in 32 bit signal code Michael Neuling
2008-06-24 13:47 ` Kumar Gala
2008-06-24 10:57 ` [PATCH 5/9] powerpc: Introduce VSX thread_struct and CONFIG_VSX Michael Neuling
2008-06-24 10:57 ` [PATCH 9/9] powerpc: Add CONFIG_VSX config option Michael Neuling
2008-06-24 14:19 ` Kumar Gala
2008-06-24 10:57 ` [PATCH 7/9] powerpc: Add VSX assembler code macros Michael Neuling
2008-06-24 14:06 ` Kumar Gala
2008-06-25 0:06 ` Michael Neuling
2008-06-25 2:19 ` Kumar Gala
2008-06-24 10:57 ` [PATCH 6/9] powerpc: Add VSX CPU feature Michael Neuling
2008-06-24 14:19 ` Kumar Gala
2008-06-24 10:57 ` [PATCH 4/9] powerpc: Make load_up_fpu and load_up_altivec callable Michael Neuling
2008-06-24 14:01 ` Kumar Gala
2008-06-24 10:57 ` [PATCH 8/9] powerpc: Add VSX context save/restore, ptrace and signal support Michael Neuling
2008-06-25 4:07 ` [PATCH 0/9] powerpc: Add kernel support for POWER7 VSX Michael Neuling
2008-06-25 4:07 ` [PATCH 1/9] powerpc: Fix msr setting in 32 bit signal code Michael Neuling
2008-06-25 4:07 ` [PATCH 2/9] powerpc: Add macros to access floating point registers in thread_struct Michael Neuling
2008-06-25 14:08 ` Kumar Gala
2008-06-25 15:34 ` Scott Wood
2008-06-25 16:12 ` Gabriel Paubert
2008-06-25 16:17 ` Scott Wood
2008-06-25 17:07 ` Kumar Gala
2008-06-26 0:09 ` Michael Neuling
2008-06-26 7:07 ` [PATCH] " Michael Neuling
2008-06-26 10:44 ` [PATCH 2/9] " Gabriel Paubert
2008-06-25 17:08 ` Andreas Schwab
2008-06-25 4:07 ` [PATCH 9/9] powerpc: Add CONFIG_VSX config option Michael Neuling
2008-06-25 4:07 ` [PATCH 3/9] powerpc: Move altivec_unavailable Michael Neuling
2008-06-25 4:07 ` [PATCH 6/9] powerpc: Add VSX CPU feature Michael Neuling
2008-06-25 4:07 ` [PATCH 4/9] powerpc: Make load_up_fpu and load_up_altivec callable Michael Neuling
2008-06-25 4:07 ` [PATCH 5/9] powerpc: Introduce VSX thread_struct and CONFIG_VSX Michael Neuling
2008-06-25 4:07 ` [PATCH 8/9] powerpc: Add VSX context save/restore, ptrace and signal support Michael Neuling
2008-06-25 4:07 ` [PATCH 7/9] powerpc: Add VSX assembler code macros Michael Neuling
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=29411.1213855280@neuling.org \
--to=mikey@neuling.org \
--cc=galak@kernel.crashing.org \
--cc=linuxppc-dev@ozlabs.org \
--cc=paulus@samba.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).