From: "Gautham R. Shenoy" <ego@linux.vnet.ibm.com>
To: Michael Ellerman <mpe@ellerman.id.au>,
Michael Neuling <mikey@neuling.org>,
Nicholas Piggin <npiggin@gmail.com>,
Vaidyanathan Srinivasan <svaidy@linux.vnet.ibm.com>,
Shilpasri G Bhat <shilpa.bhat@linux.vnet.ibm.com>,
Akshay Adiga <akshay.adiga@linux.vnet.ibm.com>
Cc: linuxppc-dev@lists.ozlabs.org, linux-kernel@vger.kernel.org,
"Gautham R. Shenoy" <ego@linux.vnet.ibm.com>
Subject: [PATCH 1/2] powernv/powerpc:Save/Restore additional SPRs for stop4 cpuidle
Date: Tue, 18 Jul 2017 19:58:48 +0530 [thread overview]
Message-ID: <296f38e7ce98e69e24a8c52047e1652cbf780f7c.1500361607.git.ego@linux.vnet.ibm.com> (raw)
In-Reply-To: <cover.1500361607.git.ego@linux.vnet.ibm.com>
In-Reply-To: <cover.1500361607.git.ego@linux.vnet.ibm.com>
From: "Gautham R. Shenoy" <ego@linux.vnet.ibm.com>
The stop4 idle state on POWER9 is a deep idle state which loses
hypervisor resources, but whose latency is low enough that it can be
exposed via cpuidle.
Until now, the deep idle states which lose hypervisor resources (eg:
winkle) were only exposed via CPU-Hotplug. Hence currently on wakeup
from such states, barring a few SPRs which need to be restored to
their older value, rest of the SPRS are reinitialized to their values
corresponding to that at boot time.
When stop4 is used in the context of cpuidle, we want these additional
SPRs to be restored to their older value, to ensure that the context
on the CPU coming back from idle is same as it was before going idle.
In this patch, we define a SPR save area in PACA (since we have used
up the volatile register space in the stack) and on POWER9, we restore
SPRN_PID, SPRN_LDBAR, SPRN_FSCR, SPRN_HFSCR, SPRN_MMCRA, SPRN_MMCR1,
SPRN_MMCR2 to the values they had before entering stop.
Signed-off-by: Gautham R. Shenoy <ego@linux.vnet.ibm.com>
---
arch/powerpc/include/asm/paca.h | 7 ++++++
arch/powerpc/kernel/asm-offsets.c | 12 ++++++++++
arch/powerpc/kernel/idle_book3s.S | 46 +++++++++++++++++++++++++++++++++++++--
3 files changed, 63 insertions(+), 2 deletions(-)
diff --git a/arch/powerpc/include/asm/paca.h b/arch/powerpc/include/asm/paca.h
index dc88a31..a6b9ea6 100644
--- a/arch/powerpc/include/asm/paca.h
+++ b/arch/powerpc/include/asm/paca.h
@@ -48,6 +48,7 @@
#define get_lppaca() (get_paca()->lppaca_ptr)
#define get_slb_shadow() (get_paca()->slb_shadow_ptr)
+#define MAX_STOP_SPRS 7
struct task_struct;
/*
@@ -183,6 +184,12 @@ struct paca_struct {
struct paca_struct **thread_sibling_pacas;
/* The PSSCR value that the kernel requested before going to stop */
u64 requested_psscr;
+
+ /*
+ * Save area for additional SPRs that need to be
+ * saved/restored during cpuidle stop.
+ */
+ u64 stop_spr_save_area[MAX_STOP_SPRS];
#endif
#ifdef CONFIG_PPC_STD_MMU_64
diff --git a/arch/powerpc/kernel/asm-offsets.c b/arch/powerpc/kernel/asm-offsets.c
index a7b5af3..0262283 100644
--- a/arch/powerpc/kernel/asm-offsets.c
+++ b/arch/powerpc/kernel/asm-offsets.c
@@ -743,6 +743,18 @@ int main(void)
OFFSET(PACA_SUBCORE_SIBLING_MASK, paca_struct, subcore_sibling_mask);
OFFSET(PACA_SIBLING_PACA_PTRS, paca_struct, thread_sibling_pacas);
OFFSET(PACA_REQ_PSSCR, paca_struct, requested_psscr);
+
+ OFFSET(PACA_PID, paca_struct, stop_spr_save_area[0]);
+ OFFSET(PACA_LDBAR, paca_struct, stop_spr_save_area[1]);
+ OFFSET(PACA_FSCR, paca_struct, stop_spr_save_area[2]);
+ OFFSET(PACA_HFSCR, paca_struct, stop_spr_save_area[3]);
+
+ /* On POWER9, we are already saving MMCR0 for ESL=EC=1 */
+ OFFSET(PACA_MMCRA, paca_struct, stop_spr_save_area[4]);
+ OFFSET(PACA_MMCR1, paca_struct, stop_spr_save_area[5]);
+ OFFSET(PACA_MMCR2, paca_struct, stop_spr_save_area[6]);
+
+
#endif
DEFINE(PPC_DBELL_SERVER, PPC_DBELL_SERVER);
diff --git a/arch/powerpc/kernel/idle_book3s.S b/arch/powerpc/kernel/idle_book3s.S
index 5adb390e..7083f63 100644
--- a/arch/powerpc/kernel/idle_book3s.S
+++ b/arch/powerpc/kernel/idle_book3s.S
@@ -84,7 +84,50 @@ ALT_FTR_SECTION_END_IFSET(CPU_FTR_ARCH_300)
std r3,_WORT(r1)
mfspr r3,SPRN_WORC
std r3,_WORC(r1)
+BEGIN_FTR_SECTION
+ blr
+END_FTR_SECTION_IFCLR(CPU_FTR_ARCH_300)
+ /* Save additional SPRs for POWER9 */
+power9_save_additional_sprs:
+ mfspr r3, SPRN_PID
+ mfspr r4, SPRN_LDBAR
+ std r3, PACA_PID(r13)
+ std r4, PACA_LDBAR(r13)
+
+ mfspr r3, SPRN_FSCR
+ mfspr r4, SPRN_HFSCR
+ std r3, PACA_FSCR(r13)
+ std r4, PACA_HFSCR(r13)
+
+ mfspr r3, SPRN_MMCRA
+ mfspr r4, SPRN_MMCR1
+ std r3, PACA_MMCRA(r13)
+ std r4, PACA_MMCR1(r13)
+
+ mfspr r3, SPRN_MMCR2
+ std r3, PACA_MMCR2(r13)
+ blr
+power9_restore_additional_sprs:
+ ld r3,_LPCR(r1)
+ ld r4, PACA_PID(r13)
+ mtspr SPRN_LPCR,r3
+ mtspr SPRN_PID, r4
+
+ ld r3, PACA_LDBAR(r13)
+ ld r4, PACA_FSCR(r13)
+ mtspr SPRN_LDBAR, r3
+ mtspr SPRN_FSCR, r4
+
+ ld r3, PACA_HFSCR(r13)
+ ld r4, PACA_MMCRA(r13)
+ mtspr SPRN_HFSCR, r3
+ mtspr SPRN_MMCRA, r4
+ /* We have already restored PACA_MMCR0 */
+ ld r3, PACA_MMCR1(r13)
+ ld r4, PACA_MMCR2(r13)
+ mtspr SPRN_MMCR1, r3
+ mtspr SPRN_MMCR2, r4
blr
/*
@@ -791,8 +834,7 @@ no_segments:
bctrl
BEGIN_FTR_SECTION
- ld r4,_LPCR(r1)
- mtspr SPRN_LPCR,r4
+ bl power9_restore_additional_sprs
END_FTR_SECTION_IFSET(CPU_FTR_ARCH_300)
hypervisor_state_restored:
--
1.9.4
next prev parent reply other threads:[~2017-07-18 14:29 UTC|newest]
Thread overview: 7+ messages / expand[flat|nested] mbox.gz Atom feed top
2017-07-18 14:28 [PATCH 0/2] powerpc: powernv: Enable stop4 via cpuidle Gautham R. Shenoy
2017-07-18 14:28 ` Gautham R. Shenoy [this message]
2017-07-18 14:28 ` [PATCH 2/2] powernv/powerpc: Clear PECE1 in LPCR via stop-api only on Hotplug Gautham R. Shenoy
2017-07-19 2:14 ` Nicholas Piggin
2017-07-19 5:04 ` Gautham R Shenoy
2017-07-19 5:20 ` Nicholas Piggin
2017-07-25 10:46 ` Michael Ellerman
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=296f38e7ce98e69e24a8c52047e1652cbf780f7c.1500361607.git.ego@linux.vnet.ibm.com \
--to=ego@linux.vnet.ibm.com \
--cc=akshay.adiga@linux.vnet.ibm.com \
--cc=linux-kernel@vger.kernel.org \
--cc=linuxppc-dev@lists.ozlabs.org \
--cc=mikey@neuling.org \
--cc=mpe@ellerman.id.au \
--cc=npiggin@gmail.com \
--cc=shilpa.bhat@linux.vnet.ibm.com \
--cc=svaidy@linux.vnet.ibm.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).