From: kajoljain <kjain@linux.ibm.com>
To: Athira Rajeev <atrajeev@linux.vnet.ibm.com>,
mpe@ellerman.id.au, acme@kernel.org, jolsa@kernel.org
Cc: ego@linux.vnet.ibm.com, mikey@neuling.org,
maddy@linux.vnet.ibm.com, kvm@vger.kernel.org,
kvm-ppc@vger.kernel.org, svaidyan@in.ibm.com,
linuxppc-dev@lists.ozlabs.org
Subject: Re: [v3 13/15] tools/perf: Add perf tools support for extended register capability in powerpc
Date: Tue, 21 Jul 2020 11:33:12 +0530 [thread overview]
Message-ID: <29874556-c8e2-bfdd-8827-e764613f8736@linux.ibm.com> (raw)
In-Reply-To: <1594996707-3727-14-git-send-email-atrajeev@linux.vnet.ibm.com>
On 7/17/20 8:08 PM, Athira Rajeev wrote:
> From: Anju T Sudhakar <anju@linux.vnet.ibm.com>
>
> Add extended regs to sample_reg_mask in the tool side to use
> with `-I?` option. Perf tools side uses extended mask to display
> the platform supported register names (with -I? option) to the user
> and also send this mask to the kernel to capture the extended registers
> in each sample. Hence decide the mask value based on the processor
> version.
>
> Currently definitions for `mfspr`, `SPRN_PVR` are part of
> `arch/powerpc/util/header.c`. Move this to a header file so that
> these definitions can be re-used in other source files as well.
>
> Signed-off-by: Anju T Sudhakar <anju@linux.vnet.ibm.com>
> [Decide extended mask at run time based on platform]
> Signed-off-by: Athira Rajeev <atrajeev@linux.vnet.ibm.com>
> Reviewed-by: Madhavan Srinivasan <maddy@linux.vnet.ibm.com>
> ---
> tools/arch/powerpc/include/uapi/asm/perf_regs.h | 14 ++++++-
> tools/perf/arch/powerpc/include/perf_regs.h | 5 ++-
> tools/perf/arch/powerpc/util/header.c | 9 +----
> tools/perf/arch/powerpc/util/perf_regs.c | 49 +++++++++++++++++++++++++
> tools/perf/arch/powerpc/util/utils_header.h | 15 ++++++++
> 5 files changed, 82 insertions(+), 10 deletions(-)
> create mode 100644 tools/perf/arch/powerpc/util/utils_header.h
>
Reviewed-by: Kajol Jain <kjain@linux.ibm.com>
Thanks,
Kajol Jain
> diff --git a/tools/arch/powerpc/include/uapi/asm/perf_regs.h b/tools/arch/powerpc/include/uapi/asm/perf_regs.h
> index f599064..225c64c 100644
> --- a/tools/arch/powerpc/include/uapi/asm/perf_regs.h
> +++ b/tools/arch/powerpc/include/uapi/asm/perf_regs.h
> @@ -48,6 +48,18 @@ enum perf_event_powerpc_regs {
> PERF_REG_POWERPC_DSISR,
> PERF_REG_POWERPC_SIER,
> PERF_REG_POWERPC_MMCRA,
> - PERF_REG_POWERPC_MAX,
> + /* Extended registers */
> + PERF_REG_POWERPC_MMCR0,
> + PERF_REG_POWERPC_MMCR1,
> + PERF_REG_POWERPC_MMCR2,
> + /* Max regs without the extended regs */
> + PERF_REG_POWERPC_MAX = PERF_REG_POWERPC_MMCRA + 1,
> };
> +
> +#define PERF_REG_PMU_MASK ((1ULL << PERF_REG_POWERPC_MAX) - 1)
> +
> +/* PERF_REG_EXTENDED_MASK value for CPU_FTR_ARCH_300 */
> +#define PERF_REG_PMU_MASK_300 (((1ULL << (PERF_REG_POWERPC_MMCR2 + 1)) - 1) - PERF_REG_PMU_MASK)
> +
> +#define PERF_REG_MAX_ISA_300 (PERF_REG_POWERPC_MMCR2 + 1)
> #endif /* _UAPI_ASM_POWERPC_PERF_REGS_H */
> diff --git a/tools/perf/arch/powerpc/include/perf_regs.h b/tools/perf/arch/powerpc/include/perf_regs.h
> index e18a355..46ed00d 100644
> --- a/tools/perf/arch/powerpc/include/perf_regs.h
> +++ b/tools/perf/arch/powerpc/include/perf_regs.h
> @@ -64,7 +64,10 @@
> [PERF_REG_POWERPC_DAR] = "dar",
> [PERF_REG_POWERPC_DSISR] = "dsisr",
> [PERF_REG_POWERPC_SIER] = "sier",
> - [PERF_REG_POWERPC_MMCRA] = "mmcra"
> + [PERF_REG_POWERPC_MMCRA] = "mmcra",
> + [PERF_REG_POWERPC_MMCR0] = "mmcr0",
> + [PERF_REG_POWERPC_MMCR1] = "mmcr1",
> + [PERF_REG_POWERPC_MMCR2] = "mmcr2",
> };
>
> static inline const char *perf_reg_name(int id)
> diff --git a/tools/perf/arch/powerpc/util/header.c b/tools/perf/arch/powerpc/util/header.c
> index d487007..1a95017 100644
> --- a/tools/perf/arch/powerpc/util/header.c
> +++ b/tools/perf/arch/powerpc/util/header.c
> @@ -7,17 +7,10 @@
> #include <string.h>
> #include <linux/stringify.h>
> #include "header.h"
> +#include "utils_header.h"
> #include "metricgroup.h"
> #include <api/fs/fs.h>
>
> -#define mfspr(rn) ({unsigned long rval; \
> - asm volatile("mfspr %0," __stringify(rn) \
> - : "=r" (rval)); rval; })
> -
> -#define SPRN_PVR 0x11F /* Processor Version Register */
> -#define PVR_VER(pvr) (((pvr) >> 16) & 0xFFFF) /* Version field */
> -#define PVR_REV(pvr) (((pvr) >> 0) & 0xFFFF) /* Revison field */
> -
> int
> get_cpuid(char *buffer, size_t sz)
> {
> diff --git a/tools/perf/arch/powerpc/util/perf_regs.c b/tools/perf/arch/powerpc/util/perf_regs.c
> index 0a52429..d64ba0c 100644
> --- a/tools/perf/arch/powerpc/util/perf_regs.c
> +++ b/tools/perf/arch/powerpc/util/perf_regs.c
> @@ -6,9 +6,15 @@
>
> #include "../../../util/perf_regs.h"
> #include "../../../util/debug.h"
> +#include "../../../util/event.h"
> +#include "../../../util/header.h"
> +#include "../../../perf-sys.h"
> +#include "utils_header.h"
>
> #include <linux/kernel.h>
>
> +#define PVR_POWER9 0x004E
> +
> const struct sample_reg sample_reg_masks[] = {
> SMPL_REG(r0, PERF_REG_POWERPC_R0),
> SMPL_REG(r1, PERF_REG_POWERPC_R1),
> @@ -55,6 +61,9 @@
> SMPL_REG(dsisr, PERF_REG_POWERPC_DSISR),
> SMPL_REG(sier, PERF_REG_POWERPC_SIER),
> SMPL_REG(mmcra, PERF_REG_POWERPC_MMCRA),
> + SMPL_REG(mmcr0, PERF_REG_POWERPC_MMCR0),
> + SMPL_REG(mmcr1, PERF_REG_POWERPC_MMCR1),
> + SMPL_REG(mmcr2, PERF_REG_POWERPC_MMCR2),
> SMPL_REG_END
> };
>
> @@ -163,3 +172,43 @@ int arch_sdt_arg_parse_op(char *old_op, char **new_op)
>
> return SDT_ARG_VALID;
> }
> +
> +uint64_t arch__intr_reg_mask(void)
> +{
> + struct perf_event_attr attr = {
> + .type = PERF_TYPE_HARDWARE,
> + .config = PERF_COUNT_HW_CPU_CYCLES,
> + .sample_type = PERF_SAMPLE_REGS_INTR,
> + .precise_ip = 1,
> + .disabled = 1,
> + .exclude_kernel = 1,
> + };
> + int fd;
> + u32 version;
> + u64 extended_mask = 0, mask = PERF_REGS_MASK;
> +
> + /*
> + * Get the PVR value to set the extended
> + * mask specific to platform.
> + */
> + version = (((mfspr(SPRN_PVR)) >> 16) & 0xFFFF);
> + if (version == PVR_POWER9)
> + extended_mask = PERF_REG_PMU_MASK_300;
> + else
> + return mask;
> +
> + attr.sample_regs_intr = extended_mask;
> + attr.sample_period = 1;
> + event_attr_init(&attr);
> +
> + /*
> + * check if the pmu supports perf extended regs, before
> + * returning the register mask to sample.
> + */
> + fd = sys_perf_event_open(&attr, 0, -1, -1, 0);
> + if (fd != -1) {
> + close(fd);
> + mask |= extended_mask;
> + }
> + return mask;
> +}
> diff --git a/tools/perf/arch/powerpc/util/utils_header.h b/tools/perf/arch/powerpc/util/utils_header.h
> new file mode 100644
> index 0000000..5788eb1
> --- /dev/null
> +++ b/tools/perf/arch/powerpc/util/utils_header.h
> @@ -0,0 +1,15 @@
> +/* SPDX-License-Identifier: GPL-2.0 */
> +#ifndef __PERF_UTIL_HEADER_H
> +#define __PERF_UTIL_HEADER_H
> +
> +#include <linux/stringify.h>
> +
> +#define mfspr(rn) ({unsigned long rval; \
> + asm volatile("mfspr %0," __stringify(rn) \
> + : "=r" (rval)); rval; })
> +
> +#define SPRN_PVR 0x11F /* Processor Version Register */
> +#define PVR_VER(pvr) (((pvr) >> 16) & 0xFFFF) /* Version field */
> +#define PVR_REV(pvr) (((pvr) >> 0) & 0xFFFF) /* Revison field */
> +
> +#endif /* __PERF_UTIL_HEADER_H */
>
next prev parent reply other threads:[~2020-07-21 6:06 UTC|newest]
Thread overview: 51+ messages / expand[flat|nested] mbox.gz Atom feed top
2020-07-17 14:38 [v3 00/15] powerpc/perf: Add support for power10 PMU Hardware Athira Rajeev
2020-07-17 14:38 ` [v3 01/15] powerpc/perf: Update cpu_hw_event to use `struct` for storing MMCR registers Athira Rajeev
2020-07-21 3:42 ` Jordan Niethe
2020-07-22 2:15 ` Athira Rajeev
2020-07-17 14:38 ` [v3 02/15] KVM: PPC: Book3S HV: Cleanup updates for kvm vcpu MMCR Athira Rajeev
2020-07-21 3:54 ` Paul Mackerras
2020-07-22 2:09 ` Athira Rajeev
2020-07-22 4:37 ` Michael Ellerman
2020-07-22 5:49 ` Athira Rajeev
2020-07-22 4:54 ` Paul Mackerras
2020-07-22 6:03 ` Madhavan Srinivasan
2020-07-22 4:38 ` Michael Ellerman
2020-07-17 14:38 ` [v3 03/15] powerpc/perf: Update Power PMU cache_events to u64 type Athira Rajeev
2020-07-17 14:38 ` [v3 04/15] powerpc/perf: Add support for ISA3.1 PMU SPRs Athira Rajeev
2020-07-22 4:18 ` Jordan Niethe
2020-07-22 8:07 ` Athira Rajeev
2020-07-22 10:52 ` Jordan Niethe
2020-07-22 12:03 ` Michael Ellerman
2020-07-17 14:38 ` [v3 05/15] KVM: PPC: Book3S HV: Save/restore new PMU registers Athira Rajeev
2020-07-17 14:38 ` [v3 06/15] powerpc/xmon: Add PowerISA v3.1 PMU SPRs Athira Rajeev
2020-07-17 14:38 ` [v3 07/15] powerpc/perf: Add power10_feat to dt_cpu_ftrs Athira Rajeev
2020-07-22 4:41 ` Jordan Niethe
2020-07-22 7:55 ` Athira Rajeev
2020-07-22 10:39 ` Michael Ellerman
2020-07-22 10:49 ` Jordan Niethe
2020-07-22 12:28 ` Athira Rajeev
2020-07-17 14:38 ` [v3 08/15] powerpc/perf: power10 Performance Monitoring support Athira Rajeev
2020-07-17 14:38 ` [v3 09/15] powerpc/perf: Ignore the BHRB kernel address filtering for P10 Athira Rajeev
2020-07-17 14:38 ` [v3 10/15] powerpc/perf: Add Power10 BHRB filter support for PERF_SAMPLE_BRANCH_IND_CALL/COND Athira Rajeev
2020-07-17 14:38 ` [v3 11/15] powerpc/perf: BHRB control to disable BHRB logic when not used Athira Rajeev
2020-07-20 10:05 ` Gautham R Shenoy
2020-07-23 1:26 ` Jordan Niethe
2020-07-23 1:28 ` Jordan Niethe
2020-07-17 14:38 ` [v3 12/15] powerpc/perf: Add support for outputting extended regs in perf intr_regs Athira Rajeev
2020-07-19 11:17 ` kernel test robot
2020-07-20 8:09 ` Athira Rajeev
2020-07-21 6:02 ` kajoljain
2020-07-23 5:44 ` kajoljain
2020-07-23 14:56 ` Arnaldo Carvalho de Melo
2020-07-24 8:25 ` Athira Rajeev
2020-07-24 12:26 ` Ravi Bangoria
2020-07-24 18:13 ` Athira Rajeev
2020-07-17 14:38 ` [v3 13/15] tools/perf: Add perf tools support for extended register capability in powerpc Athira Rajeev
2020-07-21 6:03 ` kajoljain [this message]
2020-07-24 11:02 ` Ravi Bangoria
2020-07-24 18:02 ` Athira Rajeev
2020-07-17 14:38 ` [v3 14/15] powerpc/perf: Add extended regs support for power10 platform Athira Rajeev
2020-07-21 6:03 ` kajoljain
2020-07-17 14:38 ` [v3 15/15] tools/perf: Add perf tools support for extended regs in power10 Athira Rajeev
2020-07-21 6:04 ` kajoljain
2020-07-24 13:24 ` [v3 00/15] powerpc/perf: Add support for power10 PMU Hardware Michael Ellerman
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=29874556-c8e2-bfdd-8827-e764613f8736@linux.ibm.com \
--to=kjain@linux.ibm.com \
--cc=acme@kernel.org \
--cc=atrajeev@linux.vnet.ibm.com \
--cc=ego@linux.vnet.ibm.com \
--cc=jolsa@kernel.org \
--cc=kvm-ppc@vger.kernel.org \
--cc=kvm@vger.kernel.org \
--cc=linuxppc-dev@lists.ozlabs.org \
--cc=maddy@linux.vnet.ibm.com \
--cc=mikey@neuling.org \
--cc=mpe@ellerman.id.au \
--cc=svaidyan@in.ibm.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).