Re: [PATCH] [net, 83xx] ucc_geth.c: Fix upsmr setting in RMII mode

[Li Yang <leoli@freescale.com>]

On Tue, Apr 21, 2009 at 4:36 PM, Heiko Schocher <hs@denx.de> wrote:
> If using the UCC on a MPC8360 in RMII mode, don;t set
> UCC_GETH_UPSMR_RPM bit in the upsmr register.
>
> Signed-off-by: Heiko Schocher <hs@denx.de>

Acked-by: Li Yang <leoli@freescale.com>

> ---
> =C2=A0drivers/net/ucc_geth.c | =C2=A0 =C2=A03 ++-
> =C2=A01 files changed, 2 insertions(+), 1 deletions(-)
>
> diff --git a/drivers/net/ucc_geth.c b/drivers/net/ucc_geth.c
> index d3f39e8..44f8392 100644
> --- a/drivers/net/ucc_geth.c
> +++ b/drivers/net/ucc_geth.c
> @@ -1394,7 +1394,8 @@ static int adjust_enet_interface(struct ucc_geth_pr=
ivate *ugeth)
> =C2=A0 =C2=A0 =C2=A0 =C2=A0 =C2=A0 =C2=A0(ugeth->phy_interface =3D=3D PHY=
_INTERFACE_MODE_RGMII_RXID) ||
> =C2=A0 =C2=A0 =C2=A0 =C2=A0 =C2=A0 =C2=A0(ugeth->phy_interface =3D=3D PHY=
_INTERFACE_MODE_RGMII_TXID) ||
> =C2=A0 =C2=A0 =C2=A0 =C2=A0 =C2=A0 =C2=A0(ugeth->phy_interface =3D=3D PHY=
_INTERFACE_MODE_RTBI)) {
> - =C2=A0 =C2=A0 =C2=A0 =C2=A0 =C2=A0 =C2=A0 =C2=A0 upsmr |=3D UCC_GETH_UP=
SMR_RPM;
> + =C2=A0 =C2=A0 =C2=A0 =C2=A0 =C2=A0 =C2=A0 =C2=A0 if (ugeth->phy_interfa=
ce !=3D PHY_INTERFACE_MODE_RMII)
> + =C2=A0 =C2=A0 =C2=A0 =C2=A0 =C2=A0 =C2=A0 =C2=A0 =C2=A0 =C2=A0 =C2=A0 =
=C2=A0 upsmr |=3D UCC_GETH_UPSMR_RPM;
> =C2=A0 =C2=A0 =C2=A0 =C2=A0 =C2=A0 =C2=A0 =C2=A0 =C2=A0switch (ugeth->max=
_speed) {
> =C2=A0 =C2=A0 =C2=A0 =C2=A0 =C2=A0 =C2=A0 =C2=A0 =C2=A0case SPEED_10:
> =C2=A0 =C2=A0 =C2=A0 =C2=A0 =C2=A0 =C2=A0 =C2=A0 =C2=A0 =C2=A0 =C2=A0 =C2=
=A0 =C2=A0upsmr |=3D UCC_GETH_UPSMR_R10M;