Hi,Grant

 

I hope I could get some advices from you about how to fix the error of porting linux2.6 to Xilinx XUPV2P.

 

The kernel I am using is 2.6.24,gcc 4.1.0,glibc 2.3.6,and the board Xilinx XUPV2P

 

It compiles successfully with some warnings like below:
  MODPOST vmlinux.o
WARNING: vmlinux.o(.text+0x223c): Section mismatch: reference to .init.text:early_init (between 'start_here' and 'initial_mmu')
WARNING: vmlinux.o(.text+0x2254): Section mismatch: reference to .init.text:machine_init (between 'start_here' and 'initial_mmu')
WARNING: vmlinux.o(.text+0x2258): Section mismatch: reference to .init.text:MMU_init (between 'start_here' and 'initial_mmu')
WARNING: vmlinux.o(.text+0x22b2): Section mismatch: reference to .init.text:start_kernel (between 'start_here' and 'initial_mmu')
WARNING: vmlinux.o(.text+0x22b6): Section mismatch: reference to .init.text:start_kernel (between 'start_here' and 'initial_mmu')
   LD      vmlinux

 

The system is created as ACE file and booted from CF Card

 

After uncompressing the kernel,the system hangs.The information is like below:

 

loaded at:     00400000 0056619C
board data at: 00000000 0000007C
relocated to:  00404068 004040E4
zimage at:     00404E51 00563BF4
avail ram:     00567000 7C9E2370

I wonder if it is the upper WARNINGs that causes the hang of the system, and how can I fix it.

 

Thanks in advance, any advice would be helpful

 

Best Regards

 

Yi