Re: Mpc8315erdb openvpn segmentation fault

[Vasanth Ragavendran <ragavendrapec@yahoo.co.in>]

Thanks again Scott. That was really helpful. Actually i forgot to mention
that i had created an ext2 ramdisk file system and it was non-persistent.
and then i changed the file system to jffs2 and it is persistent. so my
question is why is that the ext2 ramdisk is non-persistent? and what needs
to be changed in order to make it persistent. thanks again for prompt
response..


Scott Wood-2 wrote:
> 
> On Mon, 7 Mar 2011 20:28:32 -0800
> Vasanth Ragavendran <ragavendrapec@yahoo.co.in> wrote:
> 
>> 
>> Thanks a ton Scott. Actually i was working with the same version of the
>> kernel on both the boards.
>> it was 2.6.29.6. neither i changed the u-boot. it was the same in both.
>> however i recompiled the kernel and i installed on both the boards and it
>> worked fine! :) thanks again for responding. however i've another
>> question.
>> my filesystem in the board is non-persistent i.e. the files i create are
>> erased after i reboot i know the files are getting stored in RAM and i
>> wish
>> to make them persistent. what do i need to do for this? should i create a
>> separate partition in the flash and load certain files into that
>> partition?
>> or how should i make it persistent so that files stay beyond reboot!
>> thanks
>> again! eagerly awaiting your response.
> 
> Yes, you should create a filesystem (e.g. jffs2) on a flash partition.
> 
> -Scott
> 
> _______________________________________________
> Linuxppc-dev mailing list
> Linuxppc-dev@lists.ozlabs.org
> https://lists.ozlabs.org/listinfo/linuxppc-dev
> 
> 

-- 
View this message in context: http://old.nabble.com/Mpc8315erdb-openvpn-segmentation-fault-tp31086738p31102807.html
Sent from the linuxppc-dev mailing list archive at Nabble.com.