Re: Powerpc and ioremap

["Sébastien Chrétien" <sebastien.chretien.enseirb@gmail.com>]

[-- Attachment #1: Type: text/plain, Size: 1173 bytes --]

Thanks for your answer.
But it doesn't work.
I think ioremap create a kernel panic. But I can't see because i have no
UART ready.
Is there a way in order to trace the failure ?

2008/8/7, Juergen Beisert <j.beisert@pengutronix.de>:
>
> Am Donnerstag, 7. August 2008 11:54 schrieb Sébastien Chrétien:
>
> > Hello,
> >
> > I am trying to port linux on my Powerpc Board. I have used Linux 2.6.26
> and
> > gcc 3.4.5.
> > I have used Uboot 1.2.
> > Linux seems running from _start to udbg_early_init(). That's why I
> > develloped a udbg_driver.
> > It must write in a register which is located at 0x2001b044. So I wrote :
> >
> > void __iomem *p;
> > p=ioremap(0x2001b044,4);
> > iowrite32('O',p);
> > iowrite32('K',p);
>
>
> try
>
> p=ioremap(0x2001b000, 0x1000);
> iowrite32('O',p + 0x44);
> iowrite32('K',p + 0x44);
>
> instead.
>
> jbe
>
> --
>   Dipl.-Ing. Juergen Beisert | http://www.pengutronix.de
>   Pengutronix - Linux Solutions for Science and Industry
>    Handelsregister:  Amtsgericht Hildesheim, HRA 2686
>      Hannoversche Str. 2, 31134 Hildesheim, Germany
>    Phone: +49-5121-206917-7 |  Fax: +49-5121-206917-9
>

[-- Attachment #2: Type: text/html, Size: 1695 bytes --]