From: "federicosibilio@tiscali.it" <federicosibilio@tiscali.it>
To: linuxppc-embedded@ozlabs.org
Subject: Installing u-boot on sbc8260 via ethernet using minicom
Date: Tue, 7 Nov 2006 14:38:28 +0100 (CET) [thread overview]
Message-ID: <32912319.1162906708248.JavaMail.root@ps8> (raw)
i've tryed to install u-boot using minicom, but i'm not able to=20
configure in shell boot params,=20
using this...
boot device : motfcc
unit number : 0
processor number : 0
host name : motfcc0
inet on ethernet (e) : 192.168.0.4
inet on backplane (b): 192.168.0.4
host inet (h) : 192.168.0.3
gateway inet (g) : 192.168.0.3
flags (f) : 0x80
target name (tn) : sbc8260
when i reboot target it appears in minicom the message below:
AT S7=3D45 S0=3D0 L1 V1 X4 &c1 E1 Q0
0x1f058b0 (tBoot): miiPhyInit check cable connection
Attached TCP/IP interface to motfcc0.
Warning: no netmask specified.
Attaching network interface lo0... done.
Loading... Erroneous header read
Error loading file: errno =3D 0x610001.
Can't load boot file!!
=C3=BC
my questions are?
what file must i put into target?(u-boot.bin?)
in which way can i upload it?(using tftp with 192.168.0.4 and using=20
put command, it gives timeout for transmission, but ping to=20
192.168.0.3=20
works normally until in minicom appears error message)
Please help me to configure and install u-boot
thanks very much!!!
Naviga e telefona senza limiti con Tiscali =20
Scopri le promozioni Tiscali adsl: navighi e telefoni senza canone Telecom
http://abbonati.tiscali.it/adsl/
reply other threads:[~2006-11-07 13:53 UTC|newest]
Thread overview: [no followups] expand[flat|nested] mbox.gz Atom feed
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=32912319.1162906708248.JavaMail.root@ps8 \
--to=federicosibilio@tiscali.it \
--cc=linuxppc-embedded@ozlabs.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).